Century Components Cascade Series 11-3/8"W Maple Base Cabinet Pull-Out with Knife Block and Soft-close Full extension Slides, CASKBI110PF

Century Components Cascade Knife Organizer For Base Cabinets

Century Components Cascade knife organizer is a maple base cabinet pull-out that combines knife storage, utensil canisters, and soft-close slides in one unit, which keeps sharp tools and frequently used items organized in a single, accessible zone. The product is part of the Cascade Series 11-3/8 inch wide maple base cabinet pull-out line, so it is sized for applications where that width specification is required for layout consistency. A dedicated knife block insert is integrated into the pull-out, which holds knives upright and separated, giving a clear visual of each blade and keeping cutting edges from contacting each other. The organizer uses 140-sheen conversion finish on the maple, which creates a smooth, sealed surface that resists everyday kitchen grime and allows quick wipe-down cleaning after food prep. Two 1-1/4 quart stainless steel canisters are part of the organizer design, providing metal containers that resist corrosion and are suited to holding utensils or tools that may be wet during use.

Key Cascade Series Pull-Out Details That Matter

• The maple base cabinet pull-out construction situates storage on a sliding frame, so knives and utensils travel out of the cabinet opening instead of being reached over, which supports safer, more direct access in tight base cabinet runs.
• The knife block insert creates fixed vertical slots for blades, which keeps cutting tools separated and upright, helping maintain edge condition and allowing quick selection of the correct knife during meal preparation.
• The two 1-1/4 quart stainless steel canisters provide defined cylindrical storage volume, which suits spatulas, ladles, or other tall utensils and keeps them corralled instead of spreading across drawers or countertops.
• The 140-sheen conversion finish on the maple creates a consistent, semi-gloss surface, which stands up to normal cabinet interior use and makes it easier to remove splashes or dust from the organizer.
• The integration into the Cascade Series 11-3/8 inch width concept ties the organizer to the C-Trac 11-3/8 width design, which supports planning cabinet interiors around a known, repeatable pull-out footprint.

Blum Soft-Close Slide And Mounting Characteristics

The pull-out uses Blum TANDEM 100 lb soft-close slides with floor mount brackets, which supports a concealed undermount slide system rated for substantial load while allowing the organizer to mount to the cabinet floor. The Blum TANDEM designation identifies a slide platform designed for smooth running, so the organizer can travel fully in and out while carrying knives and utensils without binding under typical kitchen loads. The 100 lb rating means the slide set is engineered for that weight class, supporting a fully loaded organizer with knives, tools, and canisters in normal use. Soft-close action is integrated into the slides, which pulls the unit gently into the cabinet during the last part of travel, reducing impact on the cabinet front and helping contents settle without abrupt motion. Floor mount brackets are part of the slide configuration, so the pull-out structure is supported from the cabinet bottom, aligning the motion with the base panel.

How This Maple Pull-Out Works In Daily Use

Knife Block And Canisters In Base Cabinet Layouts

The Century Components Cascade Series 11-3/8 inch wide maple base cabinet pull-out with knife block is designed as a base cabinet organizer, which places knife storage at a comfortable lower height in the cabinet run for straightforward reach during prep work. The dedicated knife block insert concentrates blades in a defined section, which keeps them in one predictable location instead of scattered across drawers, improving workflow when moving between sink, prep surface, and cooktop. The two 1-1/4 quart stainless steel canisters sit on the same pull-out platform, which consolidates tall utensils and tools alongside knives so common prep implements are grouped within the same slide-out motion. The stainless steel material of the canisters withstands contact with damp utensils, which suits use next to food prep zones where rinse and reuse cycles are frequent. The maple construction ties the organizer visually to wood-based cabinet interiors, which lets the pull-out blend into many base cabinet designs while delivering defined storage functions. The 140-sheen conversion finish over the maple gives the wood a sealed, smooth surface, which means normal kitchen dust or minor splashes can be wiped from the organizer without working against raw grain.

Slide Performance, C-Trac Width, And Repeatable Results

The Blum TANDEM 100 lb soft-close slides used on this unit are full extension, which allows the pull-out to travel completely outward so the rear of the knife block and canisters can be accessed without leaning into the cabinet. The 100 lb rating supports the combined weight of maple construction, knives, stainless steel canisters, and utensils in standard kitchen duty, which helps maintain consistent slide performance over time in a base cabinet environment. Soft-close action on the Blum TANDEM slides slows and seats the pull-out as it returns, which reduces noise in the kitchen and moderates movement of knives and utensils during closing. Floor mount brackets tie the slide system to the cabinet bottom, which establishes a solid reference plane for motion that aligns with typical base cabinet construction. The organizer is designed for C-Trac 11-3/8 inch width, which sets a clear dimensional target when planning cabinet carcass openings for this specific Cascade Series pull-out. The manufacturer part number CASKBI110PF identifies this exact configuration of maple base cabinet pull-out with knife block, stainless steel canisters, 140-sheen conversion finish, and Blum TANDEM 100 lb soft-close slides, which aids in specifying the same unit across multiple base cabinets.

Common Questions About This Cascade Knife Organizer

Choose This Cascade Pull-Out For Organized Knife Storage

The Century Components Cascade Series 11-3/8 inch wide maple base cabinet pull-out with knife block, stainless steel canisters, and Blum TANDEM 100 lb soft-close slides brings knife and utensil storage into a single, smooth-running organizer. The knife block insert, stainless steel canisters, and 140-sheen conversion finish on maple work together to keep sharp tools, tall utensils, and interior surfaces orderly inside the base cabinet run. For projects built around C-Trac 11-3/8 inch width organizers, selecting the CASKBI110PF part number aligns knife storage, pull-out motion, and interior finish in one consistent base cabinet solution.