Century Components Cascade Series knife block gives a base cabinet a pull-out organizer that stores knives and small items together, so tools sit in one controlled location instead of scattered across drawers. This CASKBI50PF unit is described as a 5-3/8x26x21-1/2 knife block insert, which defines a tall, narrow footprint suited to a filler-style base opening where vertical space is available but width is limited. The maple construction established in the product name provides a cabinet-grade wood organizer, so the pull-out visually matches typical interior cabinetry and feels familiar during installation and daily use. A knife block insert mentioned in the description positions blades in defined slots, so edges are separated and upright, which helps prevent contact damage while keeping handles easy to grab. Soft-close full extension slides described for this pull-out let the organizer travel fully out of the cabinet and then close smoothly, so the storage space is accessible from front to back without abrupt slamming.
The web description notes Blum TANDEM 100 lb, soft-close slides with floor mount brackets, which gives the insert a concealed undermount slide system anchored at the cabinet floor, so installers fasten to the base instead of side walls when positioning the pull-out. A 100 lb load rating on these Blum TANDEM slides provides capacity for knives and the two 1-1/4 quart stainless steel canisters referenced in the description, so the organizer stays within a defined performance range while loaded with typical kitchen tools. Soft-close action built into the TANDEM slides lets the pull-out self-dampen during the last portion of travel, so the cabinet frame and maple insert experience reduced impact when users push the unit shut. Floor mount brackets specified in the description establish a fixed reference plane at the cabinet bottom, so installers can square and align the slide set using the cabinet floor as the main datum.
The description identifies this unit as a base cabinet pull-out with knife block, so it occupies a vertical opening in a base run where knives benefit from a dedicated, enclosed space rather than an open countertop block. The 5-3/8 inch width and 26 inch by 21-1/2 inch sizing described for the knife block insert define a compact but tall footprint, so the organizer is suited to narrow cabinet positions near prep zones where full-width drawers are not available. A maple body called out in the product name gives the pull-out a wood structure, so it integrates visually with typical base cabinet interiors and allows fabricators to work with familiar materials when drilling or adjusting. The design for C-Trac 5-3/8 width mentioned in the web description ties the organizer to a specific track sizing, so it works within that defined opening dimension when laid out alongside other C-Trac components.
The Century Components Cascade Series designation anchors this knife block pull-out within a known product line, so designers referencing series standards can repeat layouts with predictable dimensions and mounting patterns. The Blum TANDEM 100 lb, soft-close slides detailed in the description provide a concealed undermount runner with defined load capacity and damping, so the organizer extends fully for access then retracts smoothly without jarring cabinet fronts or disturbing stored knives. Floor mount brackets noted for the slide system shift installation forces to the cabinet base, so the maple insert and slide tracks share a common bottom reference that helps keep the pull-out plumb and parallel under load. The two 1-1/4 quart stainless steel canisters called out in the description add fixed-volume containers to the insert, so smaller tools and utensils sit in metal wells rather than loose in the wood body, improving separation between knives and other prep items. The 140-sheen conversion finish listed in the description coats the maple with a defined sheen level, so the wood surface gains a finished appearance while presenting a smooth touch point every time the pull-out is operated.
The Century Components CASKBI50PF knife block is described as a base cabinet pull-out, so it is intended to install in a vertical opening within a base cabinet run.
The web description references a 5-3/8 inch width, so the insert provides a narrow footprint that suits filler-style or tight base cabinet openings needing organized knife storage.
This knife organizer uses Blum TANDEM 100 lb, soft-close slides with floor mount brackets, so it combines full extension travel, soft-close action, and floor-based anchoring during installation.
The product description states that it has a knife block insert and two 1-1/4 quart stainless steel canisters, so blades sit in dedicated slots while smaller utensils drop into the metal containers.
The web description lists a 140-sheen conversion finish, so the maple surfaces receive a defined sheen and a completed look that matches finished cabinet interiors.
The description notes it is designed for C-Trac 5-3/8 width, so the pull-out is sized to work within that specific track and opening dimension in a coordinated cabinet layout.
The Century Components Cascade Series knife block pull-out CASKBI50PF delivers a 5-3/8 inch wide maple organizer with knife block insert, stainless steel canisters, and Blum TANDEM 100 lb, soft-close slides, so a narrow base cabinet opening becomes a defined, smooth-running prep storage station.
Sold In: 1 Set