Century Components Cascade Series 7-3/8"W Maple Base Cabinet Pull-Out with Knife Block and Soft-close Full extension Slides, CASKBI70PF

Cascade Knife Organizer Pull-Out For Base Cabinets

Cascade knife organizer pull-out describes this Century Components Cascade Series 7-3/8 inch wide maple base cabinet pull-out with knife block and soft-close full extension slides, giving a defined place for knives and related items inside a base cabinet run. The maple construction of this base cabinet pull-out provides a solid wood organizer body that supports repeated daily use in a kitchen workspace. The dedicated knife block insert creates fixed slots for kitchen knives so blades stay separated inside the pull-out rather than shifting loosely in a drawer. This organizer uses soft-close full extension slides so the pull-out opens fully and then closes with a controlled motion, which helps keep stored items from clattering at the end of travel. The floor mount brackets work with the Blum TANDEM 100 lb soft-close slides to anchor the system at the cabinet floor, supporting the organizer and its contents under load. Designed for C-Trac 7-3/8 inch width, this pull-out fits that track size within a base cabinet layout.

Key Cabinet Organizer Details That Drive Workflow

• The Century Components Cascade Series identity defines this organizer as part of a coordinated line, which helps keep hardware and motion consistent across multiple base cabinet pull-outs in a project.
• The 7-3/8 inch width specification sets the working width of the maple pull-out, guiding cabinet layout where a narrow, dedicated knife and utensil zone is needed alongside other storage.
• The maple base cabinet pull-out construction provides a unified wood structure for the knife block and canisters, which keeps all organizing functions tied to one sliding unit inside the cabinet.
• The knife block insert creates specific slots for knives, so blades stay upright and separated, reducing contact between edges and other utensils when opening and closing the pull-out.
• The two 1-1/4 quart stainless steel canisters provide defined cylinders for items like utensils, helping keep tall tools standing within the organizer instead of lying scattered on a shelf.
• The 140-sheen conversion finish coats the maple surfaces, giving a finished appearance while adding a protective layer that supports repeated cleaning and contact with typical kitchen conditions.

Slide, Track, And Floor Mount Details For Fit

The Blum TANDEM 100 lb soft-close slides on this Cascade Series pull-out define how the unit mounts and moves, creating a full extension motion that exposes the entire organizer for access. The 100 lb rating describes the load capacity of the slide system, supporting the weight of the maple organizer, knife block, stainless steel canisters, and typical contents inside a base cabinet application. Soft-close functionality in these Blum TANDEM slides slows the last segment of travel, which helps prevent abrupt impacts that could disturb knives or utensils inside the organizer. Floor mount brackets are part of the design of this pull-out with Blum soft-close slides, locating the slide hardware at the cabinet floor so the organizer rides from a stable base. Designed for C-Trac 7-3/8 inch width, this pull-out aligns with that track interface, which defines how the organizer engages the cabinet opening and supporting structure.

Using This Maple Knife Pull-Out In Real Kitchens

Where This CASKBI70PF Organizer Works Best

This Century Components Cascade Series 7-3/8 inch wide maple base cabinet pull-out works in base cabinet sections where a narrow yet purpose-built knife and utensil zone is part of the plan. The defined width matches C-Trac 7-3/8 inch installations, setting this organizer up for use in base cabinets that follow that track standard. The maple base cabinet pull-out form positions the knife block insert at a reachable height inside the cabinet opening, which helps keep frequently used knives accessible without consuming drawer space. The two 1-1/4 quart stainless steel canisters sit within the same pull-out, so utensils and similar tools occupy the same sliding footprint as the knife block. The 140-sheen conversion finish on the maple provides a uniform look that aligns with finished cabinet interiors, supporting use in visible or open-concept kitchen layouts.

Details That Support Repeatable Motion And Layout

The Blum TANDEM 100 lb soft-close slides with floor mount brackets control the motion path of this CASKBI70PF base cabinet organizer, which matters for repeatable extension and retraction as the cabinet is used throughout the day. Full extension slide travel brings the knife block insert and stainless steel canisters completely out of the cabinet interior, so each slot and canister remains visible when selecting a knife or tool. The 100 lb capacity of the Blum TANDEM slides ensures the slide hardware is rated for the combined maple structure and typical kitchen contents, supporting long-term use in busy environments. Soft-close action dampens closing force, which reduces jarring on knife edges and canister contents as the pull-out returns to the cabinet. The 7-3/8 inch C-Trac design dimension keeps the organizer footprint predictable, simplifying repetition of this configuration across multiple similar base cabinets on the same project.

Knife Organizer Pull-Out Questions From Installers

Select This Cascade Pull-Out For Defined Knife Storage

The Century Components Cascade Series CASKBI70PF brings a 7-3/8 inch wide maple base cabinet pull-out, a knife block insert, and two 1-1/4 quart stainless steel canisters together on Blum TANDEM 100 lb soft-close full extension slides. Designed for C-Trac 7-3/8 inch width with floor mount brackets, this organizer sets a clear footprint and motion path inside a base cabinet. For projects that need a dedicated knife and utensil zone driven by a known part number, this Cascade knife organizer pull-out offers a defined, repeatable solution.