Century Components Walnut Creek MagBase deep drawer organizer uses a concealed steel base paired with magnetic pegs to create an adjustable layout inside a deep drawer, so positions can be changed without tools during cabinet setups or reconfigurations. The MagBase design relies on magnetic pegs that lock to the steel plate inside the board, so dividers stay put during everyday drawer use yet can be repositioned when storage needs change. This organizer uses walnut pegs, so the visible layout presents a walnut look while the steel base remains hidden during normal drawer operation. The board is designed as a 30 inch wide drawer insert and serves as a foundation for arranging the 12 magnetic pegs into custom patterns. The trimmable construction on the 30 inch width dimension lets the board be trimmed down 1-1/2 inch on each side, supporting fit adjustments in qualifying drawer openings.
This MagBase deep drawer organizer is built as a 30 inch width insert with a trimmable edge allowance, so installers can cut up to 1-1/2 inch from each side of the width to refine the fit inside a drawer. The trimmable 30 inch drawer organizer layout gives flexibility within that adjustment band when aligning the insert to drawer sidewalls. With the steel plate located inside the board, magnetic contact occurs beneath the surface, so pegs simply place onto the organizer top and engage the internal plate for positioning. The 12 walnut pegs at 6 inch height stand tall enough to act as dividers in deeper drawers, aiding vertical organization. Their 1-1/2 inch diameter footprint offers a solid base on the organizer surface, supporting stable placement patterns across the board.
The Walnut Creek MagBase deep drawer organizer is designed for use as a drawer insert in cabinetry where a 30 inch width foundation, with the option to trim 1-1/2 inch from each side, matches the drawer interior. The concealed steel base allows the top surface to remain visually focused on the walnut pegs, supporting installations where appearance at drawer open matters. In kitchen or bath cabinet drawers that benefit from adjustable lanes, the 12 walnut pegs at 6 inch height can be spaced to support rows of items. The 1-1/2 inch diameter pegs can be clustered or spread out on the board, giving installers freedom to build custom grids or simple stop-points tailored to stored pieces.
The MagBase design with a steel plate inside the board enables magnetic pegs to attach at any point over the steel area, which supports repeatable layouts once a preferred pattern is established. Because the pegs use magnetic engagement rather than fixed holes, layouts can be revised without altering the board, preserving the organizer for future changes. The trimmable 30 inch width dimension lets one organizer model adapt within a width range defined by the 1-1/2 inch per side trimming capacity, which can reduce variation in parts needed across similar drawer sizes. The 12 walnut pegs, all at 6 inch height, create consistent vertical dividers, so once spacing is dialed in for a given drawer contents set, layouts can be repeated in additional drawers using the same measurements.
The Walnut Creek MagBase deep drawer organizer creates an adjustable divider system using a concealed steel base and magnetic walnut pegs, so drawer layouts can be configured and reconfigured on the same board.
The MagBase organizer is designed as a 30 inch wide insert, giving a broad surface for arranging the magnetic walnut pegs into custom storage patterns inside a deep drawer.
The MagBase organizer can be trimmed on the 30 inch width dimension by 1-1/2 inch on each side, allowing the board width to be adjusted within that combined trimming range for drawer fit.
Each walnut peg on this organizer has a 1-1/2 inch diameter and a 6 inch height, providing a tall divider profile suitable for organizing items in deeper drawers.
The MagBase organizer has a steel plate inside the board, so the magnetic walnut pegs attach through magnetic force to the concealed steel base, holding their positions during normal drawer use.
The part number WCCMAGBASE30PF identifies this Century Components Walnut Creek MagBase deep drawer organizer model with a 30 inch width and the associated walnut peg system.
The Century Components Walnut Creek MagBase deep drawer organizer with 12 walnut pegs offers an adjustable divider layout built on a steel base hidden inside the board, making it suitable where magnetic reconfiguration is valued. Its 30 inch width, with the ability to trim 1-1/2 inch from each side, supports use across drawer interiors within that range. The 1-1/2 inch diameter by 6 inch height walnut pegs work as consistent dividers along the board surface for deep drawers. For projects specifying a MagBase-style insert, this WCCMAGBASE30PF model aligns with applications that call for magnetic peg flexibility and a trimmable 30 inch drawer organizer platform.
Sold In: 1 Kit