Walnut Creek MagBase deep drawer organizer uses a concealed steel base with magnetic pegs to create an adjustable layout in a deep drawer, so tools, cookware, or supplies stay separated while still being easy to reconfigure for different setups or projects. The Century Components design pairs the steel plate inside the board with movable walnut pegs, so the storage grid changes by simply lifting and repositioning each peg instead of rebuilding dividers. The organizer uses 16 walnut pegs sized at 1-1/2 inch diameter by 6 inch height, so each peg stands tall enough to corral stacked items in deeper drawers where low dividers do not hold as well. The board is identified as model WCCMAGBASE39PF, so spec-driven shops can tie this specific organizer to drawings, cut lists, and cabinet schedules without confusion. Sold in a per kit format, the product is structured for straightforward ordering on multi-job runs.
The Walnut Creek MagBase deep drawer organizer is trimmable on the 39 inch width dimension, and it can be cut down 1-1/2 inches on each side, giving installers up to 3 inches of total adjustment to dial in the fit inside a cabinet drawer. With the steel plate located inside the board, trimming stays focused on the specified width range so the primary structure that carries the magnetic pegs remains intact during fitting. The 39 inch base size supports use in wider drawer layouts, while the specified trimming range lets the same organizer serve multiple cabinet widths in a project. This combination of base width and allowable trimming simplifies planning because one organizer size can match different drawer interior clearances within the stated adjustment window.
The Walnut Creek MagBase deep drawer organizer from Century Components fits best in deep drawer applications where vertical space and item variety require flexible zoning. With a 39 inch width dimension before trimming, the board suits wide base cabinets or pantry drawers that benefit from a configurable grid for pots, containers, or taller supplies. The ability to trim 1-1/2 inches off each side means the same organizer can be sized down to match drawer interiors across a run of cabinets sharing similar but not identical internal widths. Because the steel plate sits inside the board, the working surface remains a consistent platform for the magnetic walnut pegs even after the board is trimmed within the stated range. Installers gain a single layout component that adapts across several drawer openings while still delivering the same magnetic peg performance in every cabinet bay.
The concealed steel base under the Walnut Creek MagBase deep drawer organizer provides a continuous magnetic field under the entire board surface, so each peg can lock down anywhere across the grid, supporting repeatable positioning job to job. Sixteen 1-1/2 inch diameter walnut pegs create enough individual supports to set up lanes, zones, and corners that can be mirrored across multiple drawers for consistent user experience throughout a kitchen or workspace. Peg height of 6 inches stabilizes taller stacks, so once a preferred pattern is found, the layout continues to control loads over time rather than drifting as drawers are cycled. The WCCMAGBASE39PF part designation ties this specific trimmable, 39 inch organizer directly to paperwork and ordering systems, which simplifies reorders and ensures that replacement or additional units match earlier installations. Together, the trimmable width, internal steel plate, and magnetic walnut pegs form a layout system that can be duplicated across projects without redesigning each deep drawer interior from scratch.
The Walnut Creek MagBase deep drawer organizer is a Century Components board with a concealed steel base and magnetic walnut pegs, creating an adjustable storage layout for deep drawers in cabinets or similar casework.
The Walnut Creek MagBase organizer uses magnetic walnut pegs that attach anywhere over the internal steel plate, so dividers can be repositioned to change zones and supports without modifying the board itself.
The Walnut Creek MagBase organizer uses walnut pegs that are 1-1/2 inch in diameter and 6 inches in height, giving each peg a broad, tall contact point to steady stored items in deep drawers.
The Walnut Creek MagBase deep drawer organizer is based on a 39 inch width dimension, providing coverage for wider drawers commonly used for pots, containers, or other larger stored items.
The Walnut Creek MagBase deep drawer organizer can be trimmed on the 39 inch dimension, up to 1-1/2 inches from each side, so installers can adjust the overall width within that range.
The WCCMAGBASE39PF number identifies this specific Walnut Creek MagBase deep drawer organizer version, tying the 39 inch trimmable size and magnetic peg system to ordering, drawings, and repeat project requirements.
The Walnut Creek MagBase deep drawer organizer WCCMAGBASE39PF from Century Components delivers an internal steel base, magnetic walnut pegs, and a trimmable 39 inch width, giving cabinet professionals an adaptable way to structure deep drawers for changing storage demands. The 16 walnut pegs at 1-1/2 inch diameter by 6 inch height support tall stacks and grouped items while remaining easy to reposition as layouts evolve. For projects where deep drawers need organized, repeatable zones rather than fixed dividers, this MagBase organizer provides a defined system ready to integrate into wide cabinet drawers using the specified trimming range.
Sold In: 1 Kit