Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National SW Series tambour door is a solid maple panel built for appliance garages and cabinet openings that require a taller, wider tambour solution. At 60 inches long and 36 inches wide with a flat edge profile, it covers a substantial opening while accepting the stain or paint finish you specify.
A tambour door this size is built for appliance garages that run the full height of a wall cabinet or a tall upper section, the kind of opening where a 47-inch panel comes up short. It rolls along a tambour track to conceal the opening, then rolls back out of the way when the appliance inside needs to be reached. Because the panel arrives unfinished, the finishing and installation sequence is straightforward: finish the door to match or complement the surrounding cabinets, then install it into the track with the rest of the garage assembly.
This SKU is the door panel only. The tambour track, hardware pack, and any appliance garage framing are separate components. Plan the full assembly before ordering so the track and hardware are on hand when the door arrives.
Maple is a reliable species for tambour work. Its tight, consistent grain sands smoothly and takes a stain finish without the blotching that open-grained woods can show. The flat edge profile on this series means the slat faces are flush and linear rather than rounded or beveled, which keeps the closed door reading as a clean surface. At 3/16 inch thick, the slats are solid wood rather than veneer over a substrate, so the finished surface goes all the way through and is more forgiving of sanding and finishing work before the door goes into the cabinet.
Cabinet shops specifying appliance garages for a transitional or contemporary kitchen will find the flat edge and maple species a natural fit alongside painted or stained face-frame and frameless cabinet runs. Designers working on a remodel with taller upper cabinets reach for the 60-inch length when the garage opening runs close to a standard upper cabinet height. Homeowners undertaking a cabinet refresh who are replacing a worn or damaged tambour panel in an existing garage can match the flat edge profile and finish to the surrounding work. In all cases, the door needs to be finished before it goes in, so factor finishing time into the project schedule.
No. This SKU is the tambour door panel only. The tambour track and hardware pack are sold separately and must be ordered to complete the installation.
Tambour panels can be trimmed in width by a skilled woodworker, but cutting the length affects the slat count and the way the panel travels the track. Consult the track specifications before modifying the panel dimensions.
The panel is unfinished solid maple and accepts stain, paint, or a clear topcoat. Apply finish before installing the door in the track so the slats move freely after the finish cures.
The flat edge profile has flush, straight-faced slats for a more contemporary look. The half round profile has a rounded bead on each slat face, which reads as a more traditional tambour style. This SKU is flat edge.
Choose this door when the appliance garage opening calls for solid maple, a flat edge profile, and a panel long enough to cover a taller cabinet section, all delivered ready to take whatever finish the project requires.
Sold In: 1 Each