Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National SW Series tambour door is built from solid maple slats with a flat edge profile, sized at 95 inches long by 12 inches wide to cover appliance garage openings and similar cabinetry where a narrow panel is the right fit. It ships unfinished, ready to accept stain or paint that matches the surrounding cabinetry.
A tambour door does the work of concealing an appliance garage or cabinet opening while still allowing one-handed access: pull the panel up or to the side along its track, and the opening is clear. At 12 inches wide, this panel suits the narrower end of appliance garage installations, including single-appliance enclosures built into a run of upper cabinets or a dedicated countertop niche. The 95-inch length gives fabricators and cabinet shops enough material to cut to the exact travel path the track requires, so it also works as stock for custom or made-to-order garage builds where the standard shorter panels fall short.
Maple is a close-grained hardwood that sands smooth and takes stain evenly, which is why it is a go-to species for cabinetry that will be painted or stained to a specific color. Because this door ships unfinished, the finishing process happens on your schedule, using whatever topcoat, stain, or paint matches the project. The flat edge profile on each slat sits flush against the adjacent slat for a tighter, more uniform face than a half-round or V-groove profile. Solid wood construction means the material runs through the full thickness of each slat, so light sanding to prep for finish does not break through a thin veneer layer.
Cabinet shops building custom appliance garages reach for this panel when the garage opening is on the narrower side and the client specifies maple to coordinate with painted or stained cabinetry. Designers specifying a kitchen remodel use it when the appliance garage needs to disappear into the surrounding cabinets after finishing. The tambour track, mounting hardware, and any garage enclosure components are separate purchases; this SKU is the door panel only. Confirm the required travel path length and opening width against the panel dimensions before ordering, since the 12-inch width and 95-inch length are fixed.
No. This SKU is the tambour door panel only. The tambour track, mounting hardware, and garage enclosure are sold separately.
The 95-inch length is intended to give fabricators material to fit the actual track path. Cutting to length is standard practice in cabinet shop applications, since the slat-and-backing construction trims cleanly with a sharp blade.
It ships unfinished. Sand and finish the panel before installation to match the surrounding cabinetry.
The flat edge slat has a squared face that sits flush against adjacent slats, creating a smooth, even panel surface. A half-round profile has a curved face that creates visible ridges between slats. The flat edge reads cleaner on painted or lightly stained cabinets.
When the appliance garage opening is narrow and the finish needs to match solid maple cabinetry, this flat-edge panel gives fabricators and cabinet shops a solid hardwood door ready to cut, finish, and install.
Sold In: 1 Each