NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW30-HI502 to RSSW30-HI502.

Omega National SW Series Hickory Tambour Doors Use

Omega National SW Series Hickory Tambour Doors provide a solid wood tambour panel for appliance garages and tambour door applications where a natural hickory look is needed. The 47 inch by 24 inch size establishes a defined working panel area that suits many upper-cabinet style openings in kitchen and bath layouts. The flat edge construction shapes the edge profile of the tambour, which affects how it nests against adjacent parts or within tracks during operation. The solid hickory construction delivers a hardwood panel, so the slat faces present a consistent hickory grain to align with surrounding cabinet components. As part of the Omega National SW Series, this panel matches that product line for installers standardizing on a specific tambour system across multiple cabinets. The SW-30-HI502 designation identifies this exact size and species, supporting repeat ordering when building or expanding a run.

Key Hickory Tambour Details For Cabinet Work

• The solid hardwood slat moldings are bonded to a cloth backer, creating a flexible tambour panel that rolls for appliance garage or door-style motion while keeping the slats aligned along their full width.
• Each slat molding is individual solid hardwood, so the visible face shows genuine hickory, giving cabinet runs a real-wood appearance that matches hickory cabinet doors and face frames in woodworking projects.
• The tambour panel is sanded and ready to finish, allowing finish sanding and stain or clear-coat steps to be performed on site so color and sheen can match surrounding cabinetry in the same workflow.
• The panel is made in the USA, providing a domestic-source tambour option for jobs that call for US-manufactured wood components as part of project or specification requirements.
• Five solid wood species are available in this SW Series line - Alder, Cherry, Hickory, Maple, and Red Oak - so installers can use the same construction across different wood programs while varying appearance.

Hickory Tambour Fit, Size, And Finish Workflow

The 47 inch by 24 inch hickory tambour panel size gives a defined starting blank for cabinet appliance garages or similar openings, which helps in planning track placement and clearances within a standard carcass layout. The flat edge profile on the panel sets how the edges interface with guides or frames, influencing the smoothness of movement when the tambour is installed into a door track system. The cloth-backed construction allows the series of solid hardwood slats to roll while staying unified, so the tambour can follow curved or compact paths typical in appliance garage designs. Because the panel is sanded and ready to finish, finishing steps can happen in line with other cabinet components, supporting uniform stain or topcoat appearance across the whole installation. The solid hickory species keeps the exposed face in the same hardwood family as hickory cabinet programs.

Using This Hickory Tambour In Cabinet Projects

Where This Hickory Tambour Door Panel Fits

This hickory tambour panel is classified under appliance garages and tambour doors, so it is intended for cabinet installations where a rolling wood front is needed over an opening. The 47 inch by 24 inch size lines up with many typical over-counter cabinet spans, giving a single-piece panel for that opening without splicing. As an Omega National SW Series hickory tambour, it fits projects that already use Omega National Products in kitchen and bath cabinet accessories, helping keep wood tone and construction style consistent from cabinet to cabinet. The solid hardwood slat moldings create a real-wood front suited to visible kitchen locations, letting the tambour present the same hickory character as surrounding doors and drawer fronts. With the cloth backer holding individual slats together, the panel follows curved or recessed paths common in appliance garage designs.

Details That Support Repeatable Tambour Results

The use of individual solid hardwood slat moldings bonded to a cloth backer means each slat moves in concert with its neighbors, which stabilizes the rolling action and helps the face stay aligned across the opening. The flat edge profile affects how the edges ride in a track or frame, contributing to consistent operation once the panel is set into a tambour hardware system. Because the panel is sanded and ready to finish, the surface is already prepared for stain or clear coats, reducing surface-prep steps before finishing and supporting a uniform finish film. The series coverage of five solid wood species - Alder, Cherry, Hickory, Maple, and Red Oak - allows a shop to repeat the same tambour construction method across different wood programs, which simplifies process planning when moving between species. The made in the USA origin offers a defined sourcing point on submittals or job documentation where domestic components are required by project specifications.

Common Questions About Omega Hickory Tambour Doors

Selecting This Hickory Tambour For Your Project

The Omega National SW Series Hickory Tambour Doors 47 inch by 24 inch flat edge panel offers a solid hardwood, cloth-backed tambour built for appliance garages and similar cabinet openings. The sanded and ready to finish surface streamlines finishing steps so the hickory face can match adjacent cabinetry during the same finishing pass. The SW-30-HI502 part number ties directly to this hickory size and edge style, supporting straightforward reordering when projects repeat the same cabinet layout. For cabinet work using hickory fronts and needing a rolling closure, this Omega National Products tambour panel provides a sized, species-specific option.