NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW30RO-47SL24W to RSSW30RO-47SL24W.

Omega National Red Oak Tambour Door Panel Use

Omega National SW Series Red Oak Tambour Doors describes a solid hardwood tambour panel designed for appliance garages and similar cabinet applications. The panel measures 47 inches by 24 inches, so it suits projects needing a sash-sized rolling door rather than small accent strips. The construction uses individual solid hardwood slat moldings, which form the visible face and give the door the look and workability of real wood in a traditional cabinet shop. These individual slats are bonded to a cloth backer, allowing the panel to flex smoothly in a curved track while the front face reads as continuous wood. The tambour is sanded and ready to finish, so it accepts your chosen stain, clear coat, or paint system without extra milling. The product is identified by manufacturer part number SW-30-RO511, tying it directly to the Omega National Products SW Series line.

Key Tambour Door Details For Cabinet Projects

• The tambour panel uses individual solid hardwood slat moldings bonded to a cloth backer, providing a flexible door surface that can roll in appliance garage tracks while still looking like traditional solid wood in the opening.
• The panel is made from solid redoak, giving a hardwood face that can be worked with standard woodworking tools and finished to match other red oak elements in a kitchen or bath cabinet run.
• The tambour is sanded and ready to finish, saving prep time at the bench and allowing direct movement into your preferred stain or topcoat schedule for consistent color and sheen across the job.
• The size of 47 inches by 24 inches provides a single large panel, so one piece can address many overhead cabinet or appliance garage openings without splicing multiple smaller sections together.
• The product belongs to the Appliance Garages & Tambour Doors class, aligning it with rolling door applications where a flexible, vertical-slatted wood panel is needed inside a cabinet assembly.

Red Oak Tambour Door Fit And Installation Role

The 47 inch by 24 inch panel format allows the Omega National red oak tambour door to be cut or configured to match common cabinet opening sizes in appliance garages and similar applications. Because the face is solid redoak, the edge cuts and trimmed sections expose the same hardwood material, which simplifies edge treatment and finishing around the opening. The cloth backer bonded to the slats lets the panel travel through curved or straight channels while the front stays aligned, which supports smooth rolling action in cabinet tracks. Being sanded and ready to finish, the panel moves straight from sizing into your finishing workflow, helping keep installation schedules tight when coordinating with other cabinet components.

Tambour Door Use In Appliance Garage Cabinets

Where This Wood Tambour Door Is Applied

This tambour product sits in the Appliance Garages & Tambour Doors class, so it is aimed at cabinet locations where a roll-up front is preferred over hinged doors. In a typical appliance garage, the 47 inch width gives enough material to span common counter-width cabinets, while the 24 inch height supports vertical travel from countertop level up into the cabinet. The solid redoak construction means the visible face of the door can be matched to other red oak fronts, rails, and stiles in the same run, which is useful when the appliance garage is integrated into a full kitchen layout. Because the slat moldings are individual hardwood pieces, the face shows true wood grain across each slat, so the installed door reads as a wood element rather than a composite panel. The cloth backer keeps those slats tied together, so the door behaves as a single rolling sheet during operation.

Why Tambour Construction Supports Repeatable Results

The use of individual solid hardwood slat moldings bonded to a cloth backer gives the tambour door a consistent bend profile, which helps it track predictably in matching channels over multiple openings on the same project. Solid redoak on the face lets installers sand, edge, and touch up with familiar hardwood techniques, supporting clean reveals and tight margins around the cabinet opening. Because the panel is sanded and ready to finish, shops can apply the same stain or clear system used on adjacent red oak doors and frames, helping color and sheen stay uniform across the run. The fixed 47 inch by 24 inch size provides a repeatable starting blank, which simplifies layout when multiple appliance garages or tambour-front cabinets share similar dimensions. The Omega National Products SW Series designation and SW-30-RO511 part number help specifiers call out this exact configuration when repeating a successful design in future work.

Common Questions About This Omega Tambour Door

Select This Red Oak Tambour For Cabinet Work

The solid redoak construction, bonded slat-and-cloth design, and 47 inch by 24 inch format give this Omega National SW Series tambour door a clear role in appliance garages and similar cabinets. The sanded and ready to finish surface fits into standard shop finishing schedules, while the Appliance Garages & Tambour Doors classification aligns it with rolling door layouts. For projects needing a wood-faced, flexible door panel that works within typical cabinet dimensions, this SW-30-RO511 part number provides a defined, repeatable starting point.