Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National SW Series tambour door is a solid poplar panel built to roll open and closed along a track, giving an appliance garage or cabinet opening a clean, flexible closure that accepts paint or stain to match any kitchen finish scheme.
An appliance garage keeps countertop appliances out of sight behind a door that disappears into the cabinet when open. A tambour closure is the right choice where a swing door would interfere with adjacent appliances or a countertop, because the slats roll along the track rather than swinging into the room. This panel suits a garage sized for a toaster oven, a stand mixer, or a coffee station, and the 95-inch length gives a fabricator or installer enough material to handle the full arc of a standard track layout without piecing.
Poplar is a preferred species for painted cabinet work. Its surface is smooth and consistent, and it accepts primer and paint without the raised grain that can require extra prep on coarser species. For a project where the tambour door will be painted to match the cabinet box, poplar is a practical and economical starting material.
The door arrives unfinished, which is the right starting point for any project where the tambour needs to match a specific paint color or a custom stain. Poplar takes both well, though it is not a first choice for a clear natural wood look since the species can show green or gray tones in its raw state. For a stained finish, test on an offcut first to confirm the color reads as intended. For a painted finish, a coat of primer before the topcoat produces the most consistent result. Slats are 3/16 inch thick, milled to a flat edge profile, and assembled on a flexible backing so the panel tracks smoothly through the curve.
Cabinet shops building custom appliance garages reach for this door when the spec calls for a painted finish and a solid wood construction at a practical price point. Designers working on kitchen renovations use it when the garage door needs to disappear into the painted cabinetry around it. Finish carpenters and installers who are sourcing a replacement panel or completing a new garage build will find the 95-inch length accommodates most residential track configurations. The track, hardware, and mounting components are sold separately and need to be selected to match the opening dimensions and track path of the specific garage.
No. This SKU is the tambour door panel only. The track, hardware pack, and any mounting components for the appliance garage are sold separately and need to be matched to the opening and track configuration of the specific installation.
Yes. Poplar is one of the most common species used in painted cabinet work because its surface is smooth, tight-grained, and accepts primer and paint consistently. For a stained or clear finish, test on a scrap piece first since poplar can show green or gray tones depending on the specific board.
Flat edge means each slat face is flat rather than rounded or profiled. When the door is closed, the face reads as a smooth, contemporary surface. It is a different look from a half-round slat profile, which gives a more traditional ribbed appearance.
The 95-inch length is sized to provide material for trimming to the track path of a standard appliance garage. Standard cabinet shop practice is to cut the panel to the finished length required by the track layout after the track is installed and measured.
This poplar tambour door gives a cabinet shop or installer a stable, paintable solid wood closure for an appliance garage, ready to take whatever finish the project calls for before it goes into the track.
Sold In: 1 Each