Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National SW Series tambour door is a solid hickory panel sized at 47 inches tall by 36 inches wide, built to fit an appliance garage opening and ready to accept a custom stain or paint finish once installed.
An appliance garage keeps a toaster, a coffee maker, or a countertop appliance off the visible counter without requiring it to be moved for use. The tambour door is what makes that possible: it rolls up and out of the way along a track so the appliance is accessible, then rolls back down to conceal the opening when the counter needs to look clear. This panel covers a 36-inch-wide opening, which is wide enough to house two smaller appliances side by side or one larger one with room to work around it. The hickory grain reads as a natural wood surface that integrates with face-frame and frameless cabinetry alike, and because it ships unfinished, the finish can be matched to the cabinet doors after install rather than approximated before.
Hickory is one of the harder domestic species used in cabinetry, and its grain is active enough that no two panels look the same. The flat edge slat profile keeps the face of the panel smooth and understated, letting the wood grain carry the visual interest rather than a sculpted edge detail. At 3/16 inch thick, the solid wood slats are dimensioned for tambour use specifically: thin enough to flex through the track curves, substantial enough to feel like real wood when the door is pulled open or pushed closed. The panel arrives unfinished, which is the correct starting point for a custom kitchen where the cabinet finish was applied on-site or where the installer needs to color-match an existing run.
Cabinet shops building custom appliance garages reach for solid wood tambour when the client wants a wood species that matches or coordinates with the cabinet doors. Hickory works particularly well in kitchens with a rustic, craftsman, or natural-materials direction, where the pronounced figure of the species is a feature rather than something to minimize. Designers specifying an appliance garage for a kitchen remodel will need to pair this panel with a compatible tambour track and mounting hardware, neither of which ships with the door panel. Confirm the track system and hardware requirements before the install date so the full assembly is on hand.
No. It ships as unfinished solid hickory, ready for stain, paint, or a clear topcoat applied during or after installation.
No. The tambour track and mounting hardware are sold separately. Identify the compatible track system for your appliance garage before ordering.
The flat edge slat has a smooth, planar face across the width of the panel. A half-round slat has a curved or rounded profile on each strip. The flat edge reads as a more contemporary surface; the half-round reads as more traditional.
Omega National does not specify field trimming for this panel in the product data. Work with the panel size as supplied and size the appliance garage opening to match during cabinet construction.
When the cabinetry is hickory and the appliance garage needs to match, this solid wood flat-edge panel gives the installer a consistent species and an unfinished surface to work with from the first coat to the final hardware install.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  RST4029 Mfr# T04029002-W01 | Omega National Tambour Hardware Pack 26-1/4"W x D, Wood - T04029002-W01 | ||||
Sold in: 1 Each |  OW4C51 Mfr# 4C51 | Outwater Industries Tambour Track Curve 2-5/8"W x D, Plastic - 4C51 | ||||
Sold in: 1 Each | OW4T5C Mfr# 4T5C-48 | Outwater Industries Tambour Track 1-1/32"W x D, Plastic - 4T5C-48 |
