Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National SW Series tambour door is built from solid hickory in a 60-inch length and 36-inch width, giving it the coverage to close a large appliance garage or similar cabinet opening. The flat edge profile keeps the visual line clean and lets finishing materials sit flush against adjacent surfaces. It arrives unfinished and ready for stain or paint to suit the surrounding cabinetry.
A tambour door in this size is the right choice when the appliance garage opening is too tall or too wide for a standard-sized panel. The 60-inch length provides enough travel to fully clear a generous opening, and the 36-inch width gives the panel broad coverage across the face of the cabinet. This door is the decorative component only. A compatible tambour track is required for installation and is sold separately, so plan for that as part of the project before ordering.
Hickory carries one of the most distinctive grain patterns of any North American hardwood, with strong color variation between heartwood and sapwood and a bold figure that reads well under a clear or lightly tinted finish. That character makes it a natural fit for kitchens with a rustic, craftsman, or transitional aesthetic where a more uniform wood like maple would look too quiet. Because this panel arrives unfinished, the final tone is entirely in the finisher's hands. A light stain can pull the color into a warm honey range, while a darker stain will unify the heartwood and sapwood contrast. The flat slat edge gives painters and stain applicators a straightforward surface to work on without routing or profiled edges to contend with.
Cabinet shops and custom millwork operations working on larger kitchen builds, wet bars, or butler's pantry runs are the natural buyers for this panel. Designers specifying a tall appliance garage for a stand mixer, a toaster oven, or a small countertop appliance cluster will find the 60 by 36 footprint covers those wider openings without piecing panels together. Homeowners finishing a custom kitchen remodel who want the wood species to carry through from the cabinet doors to the garage door are also well served here, since the unfinished surface allows a finish match to whatever is already on the boxes.
No. This SKU is the tambour door panel only. The track, guides, and any additional mounting hardware are sold separately. Size the track to the panel dimensions and the specific garage configuration before purchasing.
Solid wood tambour panels can sometimes be trimmed in width, but doing so risks separating slats from the backing. Work with a cabinet shop experienced in tambour if a custom width is needed, and confirm the cut method before proceeding.
That depends on the existing finish on the cabinet boxes. Because hickory has natural color variation, a dye stain tends to blend heartwood and sapwood more evenly than a pigment stain. Test on a scrap or an off-cut of the panel before committing to a finish across the full surface.
Solid wood. The slats are milled from solid hickory, not a veneer over a substrate. That is different from the veneer tambour panels also available in this family, which use a different construction and a different slat thickness.
For a wide appliance garage where hickory's bold grain is part of the design intent, this solid-wood flat-edge panel delivers the coverage, the species character, and the unfinished surface needed to bring it together on your schedule and in your finish.
Sold In: 1 Each