NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW30C-47SL36W to RSSW30C-47SL36W.

Omega National Cherry Tambour Door For Cabinets

Omega National cherry tambour door gives you a flexible solid wood panel for appliance garages and tambour door projects, so you can keep a continuous cherry look across the run. The SW Series design uses individual solid hardwood slat moldings, creating a true wood front that tracks around curves and openings where a hinged door will not work. Each slat is bonded to a cloth backer, so the panel moves as a single unit while the front stays aligned, which helps doors glide smoothly in typical tambour channels. The panel is sanded and ready to finish, allowing you to match surrounding cherry casework with your preferred stain or clear coat. Made in the USA, this tambour door supports projects where domestic solid cherry material and predictable performance are important on cabinet jobs.

Key Cherry Tambour Details For Cabinet Work

• The tambour uses individual solid hardwood slat moldings bonded to a cloth backer, so the face presents as real wood while the flexible backing lets it roll in standard cabinet tracks without stressing the slats.
• The solid cherry construction, described as TAMBOUR, SOLID CHERRY, provides a genuine cherry surface, which helps match existing cherry cabinets or trim in appliance garage and tambour door installations.
• The cherry tambour is sanded and ready to finish, so it can be stained or clear coated on site to blend with surrounding casework and door fronts without additional milling.
• The panel is part of the Omega National SW Series of tambour doors, giving installers a consistent product family when coordinating multiple tambour units within the same kitchen or bath layout.
• The tambour is listed under Appliance Garages & Tambour Doors, aligning the product with typical appliance garage applications where a rolling wood door is preferred over hinged fronts.

Installation-Oriented Details For Cherry Tambour Use

This Omega National SW Series cherry tambour door is built around individual solid hardwood slat moldings bonded to a cloth backer, so the panel can follow appliance garage curves and vertical runs common in cabinet tambour tracks. The bonded cloth backer keeps slats moving together, which supports smooth travel when the door is guided by properly sized grooves or channels. Because the tambour is sanded and ready to finish, installers can finish the door after fitting it to the opening, helping the finished surface align with face frames, adjacent doors, and trim. The solid cherry front works with standard cabinet construction techniques in its category, giving a continuous wood look where a rolling closure is needed instead of a swinging door.

Cherry Tambour In Real Cabinet Applications

Where This Solid Cherry Tambour Door Fits

The Omega National SW Series cherry tambour door is specified for Appliance Garages & Tambour Doors, so it fits projects where a rolling door is needed to cover countertop appliance bays or similar cabinet openings. The 47 inch by 36 inch sizing noted in the product name, Omega National SW Series Cherry Tambour Doors 47" x 36" Flat Edge, SW-30-CH514, defines a large panel suited to appliance garage and cabinet runs that require full-height or wide coverage. Solid hardwood slat moldings on the face provide a continuous cherry appearance, which matters in kitchen and bath layouts built around cherry fronts and trim. The cloth backer lets the slat assembly roll along the route defined by typical cabinet tambour channels, so the door can follow vertical and horizontal paths used in appliance garage designs without separating at the joints.

Details That Support Repeatable Tambour Results

The SW-30-CH514 cherry tambour door uses individual solid hardwood slat moldings bonded to a cloth backer, giving a stable front surface with a flexible backing that helps maintain consistent spacing as the door moves. This construction helps reduce binding from slats shifting independently, supporting smoother operation in well-formed tracks. The tambour is sanded and ready to finish, which allows the finisher to apply stain or clear coat after fitting, helping the finish wrap edges and ends for a uniform appearance around the cabinet opening. Being part of the Omega National SW Series tambour line means the cherry panel follows the same basic construction approach as other SW Series wood species, which can simplify planning when multiple tambour doors are specified on one project. Made in the USA, this solid cherry tambour gives shops and installers a domestically produced component for appliance garage and tambour cabinet work.

Common Questions About Omega National Cherry Tambour

Selecting This Cherry Tambour For Cabinet Projects

The Omega National SW Series Cherry Tambour Doors 47" x 36" Flat Edge, SW-30-CH514, provides a solid cherry, sanded and ready to finish panel built from individual solid hardwood slat moldings bonded to a cloth backer. This combination delivers a flexible yet unified cherry surface for Appliance Garages & Tambour Doors work, supporting appliance garage and tambour cabinet openings that need a rolling wood closure. For projects calling for domestically produced cherry, the Made in the USA construction positions this tambour as a practical match for professional shops and serious DIY cabinet builders.