NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPV-3-CH513 to RSV-3-CH513.
Omega National cherry tambour door gives you a flexible wood veneer door solution sized for appliance garages and similar cabinet openings. The Omega National V-3 Series design ties directly to wood cabinet projects where a rolling door is preferred instead of a hinged face. The 47-1/2 inch width dimension matches wider upper cabinet runs or appliance bays, so the door can span broad openings in a single, continuous panel for a clean look. The 24 inch height suits standard counter-to-cabinet clearances, helping the tambour door cover small appliances while staying within typical kitchen dimensions. The 7/32 inch depth is slim for a veneer tambour, which helps the slats track smoothly through a routed path without demanding extra space in the cabinet. The cherry wood veneer finish aligns with cherry cabinetry, letting installers carry the same species across doors and face frames for consistent appearance.
The Omega National V-3 Series cherry tambour door uses its 47-1/2 inch width to span wider upper cabinet or appliance garage openings in one piece, which simplifies layout when aligning with face frames or side panels. Its 24 inch height keeps the rolling door within common vertical clearances between countertop and wall cabinets, so the panel tracks through a compact path while still covering stored items. With a 7/32 inch depth, the tambour door provides a known panel thickness, giving builders clear guidance when routing channels or constructing a cavity to guide the slats. The cherry wood veneer surface aligns the door visually with cherry cabinet runs, so the fitted door can sit flush with surrounding materials for a consistent finished elevation.
The Omega National V-3 Series cherry tambour door, at 47-1/2 inches wide, suits wide appliance garage cabinets or similar openings where a continuous rolling front is needed across the full span. Its 24 inch height allows the tambour to operate within the typical space between countertop and upper cabinets, so the slats can travel through a compact arc while still clearing small appliances underneath. The cherry wood veneer-based construction lets the door front visually align with cherry face frames and end panels, which helps installers maintain a uniform look along a run of upper cabinets. Being categorized under Appliance Garages & Tambour Doors positions this product directly for projects where a retractable cabinet front is needed rather than doors that swing out into the work area.
The specified 7/32 inch depth for the Omega National V-3-CH513 tambour door gives a precise thickness that supports consistent track construction, so fabricators can cut a groove sized for smooth rolling movement without guesswork. The V-3 Series designation standardizes the tambour style within Omega National Products, which assists shops that repeat similar kitchen layouts and want uniform slat appearance from project to project. The 47-1/2 inch width dimension also aids repeatable cabinet design, because drawings can rely on that width when planning appliance garage sections inside a run. With the 24 inch height defined, installers can coordinate door travel relative to countertop height and upper cabinet bottoms, improving the likelihood that the rolling motion clears adjacent components. The cherry veneer surface lets finishing processes follow established cherry finishing systems, supporting consistent stain or clear-coat outcomes across multiple doors on the same job.
The Omega National V-3-CH513 tambour door is 47-1/2 inches wide, 24 inches high, and 7/32 inch deep, which guides cabinet opening sizing and track construction.
The Omega National V-3 Series cherry tambour door uses a wood veneer construction, giving a real-wood surface that aligns with wood cabinet finishing practices.
The cherry wood veneer finish on this tambour door coordinates with cherry cabinetry, helping installers deliver a continuous species and color across doors and frames.
This Omega National tambour door is categorized under Appliance Garages & Tambour Doors, aligning it with appliance garage and similar retractable cabinet front projects.
The 7/32 inch depth defines panel thickness, helping fabricators size grooves or guides so the tambour travels smoothly without excess play or tightness.
The V-3 Series designation identifies a specific Omega National tambour style, helping shops match cherry tambour doors across multiple cabinets in the same project.
The Omega National cherry tambour door V-3-CH513 offers a 47-1/2 inch by 24 inch wood veneer panel sized for appliance garages and similar cabinet openings. The defined 7/32 inch depth and V-3 Series pattern give fabricators consistent dimensions and styling to work into repeatable cabinet designs. For projects built around cherry cabinetry, this tambour door lets you carry the same cherry wood veneer across a rolling front, aligning appearance and function within one component.
Sold In: 1 Each