NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPV-3-AL502 to RSV-3-AL502.
V-3 Series Alder Tambour Doors give you a wood veneer door panel sized for appliance garage and cabinet tambour applications, so you start with a purpose-built component instead of cutting down generic stock. The Omega National V-3 Series identity ties this door to a defined product line, which matters when matching existing cabinetry or repeating a successful detail across a project. The alder wood veneer construction provides a real-wood face, supporting stain or clear finishes that align with alder cabinetry and trim. The 47-1/2 inch width establishes a working span for wider upper cabinet or appliance garage openings, reducing layout guesswork on longer runs. The 24 inch height sets the door for typical counter-to-wall-cabinet proportions, so you can plan garage openings around common kitchen dimensions. The wood veneer build focuses this panel on interior cabinet use where a warm, coordinated appearance is important.
The stated 47-1/2 inch width allows you to size appliance garage or upper cabinet openings around a known door span, helping control reveal and side clearance at each jamb. The 24 inch height defines how far this tambour door will cover vertically, which is important when aligning with countertop backsplashes or adjacent wall cabinets. The 7/32 inch depth noted in the web description describes the panel thickness zone, giving a reference for routing tracks or designing channels that accept this wood veneer tambour. With these fixed dimensions, you can standardize cut lists and cabinet layouts around the Omega National V-3 Series format instead of recalculating door coverage for every opening.
The category listing as Kitchen & Bath Cabinet Accessories positions this V-3 Series Alder Tambour Door in typical residential cabinet environments, which helps target it to kitchen and bath builds rather than general millwork. Its placement under Appliance Garages & Tambour Products signals that this panel is suited to appliance garage fronts and similar cabinet tambour openings. The wood veneer alder face makes it a natural fit for kitchens built around alder door styles, letting this tambour visually tie small appliance storage to the main cabinet run. At 47-1/2 inches wide, the door works for broader counter zones where a full-width garage is desirable, supporting concealed storage over toasters, mixers, or similar counter appliances. The 24 inch height aligns with common upper cabinet proportions, helping this tambour door sit comfortably between countertops and wall cabinetry in a typical kitchen elevation.
The manufacturer part number V-3-AL502 gives shops a precise identifier for reordering the same alder tambour door, which supports consistency across multi-unit or phased projects. The V-3 Series name ties into a defined Omega National tambour family, so once the performance and look are proven on one install, the same series can be specified again without requalifying another product line. The SAP description noting 1/2 slat construction and 47 inch by 24 inch sizing confirms a specific slat format and overall footprint, helping drafters and engineers base drawings on a stable door module. The 7/32 inch depth from the web description sets expectations for the panel thickness zone, which informs track groove design and helps avoid surprises when integrating this door into custom cabinet carcasses. Together, these consistent identifiers and dimensions support smoother shop drawings, machining programs, and field installation steps centered on a known tambour door format.
The V-3-AL502 tambour door is listed at 47-1/2 inches wide and 24 inches high, giving cabinetmakers fixed dimensions to design appliance garage or upper cabinet openings around this panel.
The tambour door uses wood veneer construction in alder, which supports a real-wood appearance that aligns with alder cabinets and lets designers coordinate finishes across the room.
The 7/32 inch depth describes the panel thickness zone, guiding the design of tracks or channels so the tambour runs smoothly without excessive play or tight spots.
This alder tambour door is listed under Kitchen & Bath Cabinet Accessories and Appliance Garages & Tambour Products, focusing it on cabinet and appliance garage applications.
The alder wood veneer matches projects centered on alder cabinetry, helping appliance garage fronts visually blend with surrounding cabinet doors, frames, and trim.
The V-3 Series designation identifies this door as part of Omega National Products tambour line, supporting consistent selection when repeating tambour details across multiple cabinets.
The V-3 Series Alder Tambour Doors specification defines a wood veneer alder panel sized at 47-1/2 inches by 24 inches, giving you a known module for appliance garage and cabinet tambour openings. The V-3-AL502 identifier from Omega National Products ties each order to the same alder veneer format, which matters when repeating this door across several cabinets or matching an existing installation. With its placement in Appliance Garages & Tambour Doors, this panel suits projects where a rolling wood veneer front is preferred over hinged doors. For cabinetmakers and installers working with alder kitchens, this tambour door provides a ready-made alder veneer option that can be integrated into new designs or coordinated with established cabinet lines.
Sold In: 1 Each