Omega National V-3 Series Alder Tambour Doors 47-1/2" x 36", V-3-AL502

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPV3-AL501 to RSV3-AL501.

Alder Tambour Door For Cabinet Projects

Alder tambour door from Omega National Products provides a flexible, roll-style wood panel solution built for appliance garages and tambour door projects in kitchen and bath cabinets. The wood veneer face bonded to medium density fiberboard creates a uniform, stable surface for building appliance garage fronts or other curved cabinet elements where a consistent substrate helps sanding, machining, and finishing stay predictable. A balance veneer on the opposite side works with the MDF core to counteract movement, so the panel resists cupping during normal shop handling and during installation into a cabinet track system. The cloth backer adds functional stability across the slats, helping the tambour roll smoothly along its path while keeping the assembly aligned as it opens and closes. Supplied sanded and ready to finish, the alder veneer lets you match or coordinate with other alder components by applying your preferred stain or clear coat in the finishing sequence.

Key Tambour Door Details For Shop Work

• The alder wood veneer bonded to medium density fiberboard gives a consistent, machinable face, which supports repeatable cutting, routing, and edge preparation when fitting the tambour into cabinet openings or tracks.
• The balance veneer on the reverse side counteracts stress in the MDF core, helping the panel remain flatter during storage and fabrication so layout, measuring, and joinery steps stay accurate.
• The cloth backer provides functional stability across the tambour slats, allowing the assembly to flex while keeping the pieces tied together, which supports smooth rolling motion in typical appliance garage or door tracks.
• The sanded and ready to finish surface reduces prep time at the bench, so you can move directly to stain or topcoat steps and time finishing with the rest of the cabinet run.
• Being part of Omega National Products appliance garages and tambour doors class keeps this alder tambour aligned with common appliance garage applications, which simplifies planning when coordinating with related Omega National components.

Installation And Fit Considerations For Tambour

The tambour door construction starts with a wood veneer bonded to medium density fiberboard, giving you a predictable thickness and solid backing when you cut the piece to fit an appliance garage opening or similar cabinet bay. The balance veneer on the back helps the MDF core resist warping as you size and edge the panel, which supports accurate track alignment and reduces the need for later adjustment. A cloth backer ties the individual tambour elements together, allowing them to flex around curves or follow a track path while remaining properly spaced, which is important for smooth travel in the cabinet. Because the face is sanded and ready to finish, you can complete all trimming and fitting work, then move directly into your finishing schedule without extra leveling passes on the veneer.

Using This V-3 Series Alder Tambour Effectively

Where This Alder Tambour Door Works Best

This Omega National V-3 Series alder tambour door is classified under appliance garages and tambour doors, so it is designed around typical kitchen and bath cabinet tambour applications where a rolling panel is needed. The alder wood veneer over an MDF core suits interior cabinet use, matching well with other wood components where a flush, uniform face is important for a consistent cabinet run. The cloth backer and tambour construction let the panel follow a curved or vertical track path in an appliance garage, providing the roll-up function that clears the countertop in tight spaces. With the surface already sanded, the tambour integrates into finishing workflows that call for staining or clear coating along with adjacent cabinet doors and face frames.

Why These Tambour Details Support Consistent Results

The combination of wood veneer bonded to medium density fiberboard gives fabricators a stable base that reacts predictably under saw blades, routers, and sanders, which reduces the chance of tear-out during cut-to-size operations for appliance garage openings. A balance veneer on the other face works to equalize tension through the MDF core, helping the tambour panel stay truer as humidity changes through normal shop and on-site conditions, so track alignment and clearances remain closer to plan. The cloth backer joining the tambour segments maintains spacing as the door rolls, supporting smoother movement and reducing binding as it moves through cabinet tracks. Being identified in the Omega National appliance garage and tambour product class ties this V-3 Series alder tambour to common appliance garage layouts, helping designers and installers match the door style with other Omega National tambour elements in a project.

Common Questions About This Alder Tambour Door

Select This Tambour Door For Cabinet Use

This Omega National V-3 Series alder tambour door unites an alder wood veneer face, medium density fiberboard core, balance veneer, and cloth backer to serve appliance garages and tambour door projects. The sanded and ready to finish surface supports cabinet shop schedules where machining, assembly, and finishing steps must move efficiently from one stage to the next. When a rolling wood panel is required for kitchen or bath cabinetry, this alder tambour door provides the tambour construction, core stability, and finish-ready surface needed for dependable appliance garage and tambour door installations.