NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPV-3-RO505 to RSV-3-RO505.
Omega National V-3 Series Red Oak Tambour Doors give cabinet builders a wood veneer tambour door sized for appliance garages and similar cabinet openings. This V-3-RO505 door uses red oak veneer, so the visible surface presents a consistent wood look that can align with red oak cabinetry in a kitchen or bath run. The 47-1/2 inch width provides coverage for wider openings in upper cabinet runs, while the 24 inch height matches common appliance garage layouts where a vertical door is needed. A 7/32 inch depth keeps the tambour profile slim, which helps the door track within a compact cavity or guide. The 1/2 inch slat description defines the basic slat scale, giving a recognizable tambour appearance that suits traditional and transitional cabinet designs. Within Wurth Baer Supply offerings, this tambour door fits into the appliance garages and tambour doors product class for cabinet projects.
The 47-1/2 inch width on this Omega National V-3-RO505 tambour door establishes how much horizontal space the cabinet opening should present, which influences where stiles or partitions can be placed in a run. A stated 24 inch size directs the overall door height, so case components above and below the opening can be dimensioned to keep reveals consistent. With a 7/32 inch depth, the tambour stack occupies a relatively small front-to-back space, which can be important when positioning guides or curved tracks behind a face frame. The 1/2 inch slat description shapes both appearance and flexibility of the door, which affects how the tambour rolls within its path and how it visually relates to neighboring cabinet doors and drawer fronts.
This Omega National V-3 Series Red Oak Tambour Door belongs in kitchen and bath cabinet work where a rolling front suits the design, especially in appliance garage applications listed within the appliance garages and tambour doors category. The red oak wood veneer surface allows the door face to visually coordinate with red oak cabinet doors, frames, or trim in the surrounding installation. With its 47-1/2 inch width, the door serves openings that span a generous portion of a wall cabinet, supporting layouts where an appliance garage shares space with additional storage behind the same rolling front. The 24 inch size makes it appropriate for upper cabinet sections that sit on or above countertops, where the door height must clear small appliances while fitting below wall cabinets or soffits.
The V-3 Series identification on this Omega National Products tambour door ties it to a defined product line, which helps a shop standardize on a known profile and scale for multiple openings in the same project. The 7/32 inch depth specification tells the installer how much room the tambour body needs from front to back, which guides the design of tracks or channels so the door can travel smoothly behind the face frame or edge banded opening. The 1/2 inch slat reference shapes the curve and movement characteristics of the tambour, which influences how tightly it can follow a track path within the cabinet shell. The red oak wood veneer gives the tambour a specific species identity, which matters when coordinating stain schedules and finishing steps so this door aligns with other red oak elements sourced through Wurth Baer Supply. The stated 47-1/2 inch by 24 inch sizing allows accurate planning of cut lists for casework panels, as the opening can be built to accept this door without later adjustment to clearances.
The Omega National V-3-RO505 tambour door is described at 47-1/2 inches wide and 24 inches in size, which defines the cabinet opening span this red oak veneer door is intended to cover.
The 7/32 inch depth identifies a slim tambour body, allowing the designer to allocate modest space for tracks or guides behind the face frame while still maintaining usable interior cabinet depth.
The 1/2 inch slat description refers to the tambour slat scale, which shapes the visual pattern of the rolled door and influences its flexibility as it follows the guide path.
The red oak wood veneer gives the door a red oak appearance, allowing it to visually match other red oak cabinet fronts where consistent species and grain are desired across a run.
This tambour door falls in the appliance garages and tambour doors product class, placing it in upper cabinet situations where a rolling front is preferred over hinged doors.
The V-3 Series label identifies the tambour as part of Omega National Products V-3 line, which helps match profile and style across multiple doors in the same installation.
The Omega National V-3 Series Red Oak Tambour Door V-3-RO505 gives cabinet shops and serious DIY builders a defined 47-1/2 inch by 24 inch tambour option for appliance garages and similar openings. The red oak wood veneer surface supports projects built around red oak fronts, while the 7/32 inch depth and 1/2 inch slat description help plan the internal path and finished look of the door. For projects sourced through Wurth Baer Supply, this tambour door serves as a clear, dimensioned component within the appliance garages and tambour doors category, ready to be specified into cabinet drawings and cut lists.
Sold In: 1 Each