NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPV-3-MA517 to RSV-3-MA517.
Omega National V-3 Series Maple Tambour Doors give you a wood veneer door panel for appliance garages and similar cabinet areas, so you can match maple cabinetry while keeping a flexible, track-friendly door surface in a compact footprint.
The 47-1/2 inch width and 24 inch height provide a defined envelope to design around, which simplifies cabinet layout when planning horizontal openings for countertop appliance storage or other upper-cabinet tambour applications.
The wood veneer maple construction creates a consistent species look across the tambour surface, which supports visual continuity when tying this door into surrounding maple casework in a kitchen or bath project.
The 7/32 inch depth described for this Omega National V-3 Series Maple Tambour Door reflects a slim panel profile, which helps conserve cabinet interior space in shallow appliance-garage cavities and reduces interference with stored items or adjacent case components.
The V-3-MA517 manufacturer part number clearly identifies this specific maple, 47-1/2 inch wide tambour model, which assists in specifying or reordering the same series within Omega National tambour and appliance garage product lines.
The 47-1/2 inch width of the Omega National V-3 Series Maple Tambour Door sets the primary opening span, so cabinet sides, tracks, and internal guides can be laid out to match this fixed horizontal measurement during fabrication.
The 24 inch height dimension provides a consistent travel length for the tambour, which is important when routing channels or designing curved paths that must accommodate the full door movement in an appliance garage or similar cabinet.
The 7/32 inch depth figure gives you a target for the tambour panel thickness, which helps when determining groove widths, clearances, and any recessing required in shelves or dividers around the door path.
The VENEER TMBR DOOR, 1/2 slat description links this product to a slatted tambour construction in veneer, guiding expectations about the door behaving as a flexible slat assembly suitable for typical tambour motion within cabinetry.
The product class of Appliance Garages & Tambour Doors positions this Omega National V-3 Series Maple Tambour Door for use in cabinet areas where a rolling or flexible door is needed, such as above countertop zones that conceal small appliances.
The category listing under Kitchen & Bath Cabinet Accessories indicates this maple tambour door is oriented toward kitchen and bath cabinetry, which helps when matching it to casework built for those spaces and coordinating with other cabinet accessories.
The wood veneer maple surface makes this tambour door particularly suited to projects where visible maple grain is desired, supporting consistent front-of-house appearance in custom or semi-custom cabinet runs around work surfaces.
The V-3-CH513 reference in the product name associates this maple tambour door with the Omega National V-3 Series naming convention, which can be useful when grouping compatible V-3 components in a single design or specification set.
The role of this item as a tambour door panel means it functions as the moving door surface within an appliance garage or tambour opening, integrating into a larger cabinet assembly that guides and supports the flexible door movement.
The combination of 47-1/2 inch width and 24 inch height gives fabricators fixed outer dimensions to design around, supporting repeatable cabinet cutlists and reducing guesswork when building multiple appliance garages using the same Omega National V-3 Series Maple Tambour Door.
The 7/32 inch depth dimension of the wood veneer tambour informs how wide to form tracks or grooves, which helps maintain smooth, consistent sliding action while limiting side-to-side play during door operation in the finished cabinet.
The maple wood veneer identity means finishing processes can be selected for veneer over solid wood, which matters for achieving uniform color and sheen on the tambour door relative to nearby maple-face-frame or panel components.
The V-3-MA517 manufacturer part number and V-3 Series labeling offer clear product identification, which supports consistent reordering or matching when future cabinet additions or replacements need to align with existing Omega National tambour installations.
The appliance garage and tambour door classification clarifies that this product is intended to function within a cabinet-based tambour system, which aids in planning its role as the primary door element in a coordinated hardware and casework assembly.
The Omega National V-3 Series Maple Tambour Door measures 47-1/2 inches wide and 24 inches high, giving a defined opening size for appliance garages or similar cabinet applications.
The tambour door uses wood veneer maple, providing a real wood maple surface that aligns visually with maple cabinetry and accepts veneer-appropriate finishing systems.
The Omega National V-3 Series Maple Tambour Door is listed at 7/32 inch depth, guiding track and groove sizing so the flexible slats move freely without excessive play.
This product is classified under Appliance Garages & Tambour Doors and Kitchen & Bath Cabinet Accessories, aligning it with kitchen or bath appliance garage and similar tambour cabinet openings.
This maple tambour door carries the Omega National Products manufacturer part number V-3-MA517, providing a clear identifier when specifying or reordering the same model.
The VENEER TMBR DOOR, 1/2 slat description indicates a veneered tambour door constructed from slats, supporting flexible movement typical of tambour door systems in cabinetry.
The Omega National V-3 Series Maple Tambour Door combines defined 47-1/2 inch by 24 inch dimensions with a maple wood veneer surface, giving cabinet builders a known-size, species-specific door panel for appliance garages and other tambour openings.
The listed 7/32 inch depth and V-3-MA517 part number provide practical sizing and identification details, supporting consistent layout, fabrication, and future matching when building or expanding maple kitchen and bath cabinetry using this tambour style.
Sold In: 1 Each