36" Wall Mount Chimney for Signature Series Range Hood Covers, Red Oak

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH36OUF1 to RSRCH36OUF1.

36 Inch Wall Mount Chimney For Signature Hoods

36 inch wall mount chimney identifies this unit as a dedicated red oak chimney sized for a 36 inch wide Signature Series wood range hood cover, so installers can match the hood width on wall applications. The product name specifies Wall Mount Chimney for Signature Series Range Hood Covers, which defines its role as the vertical extension above a Signature Series hood, giving you a coordinated wood look from cooktop to ceiling. The Omega National Products brand ties this chimney to a recognized wood range hood component line, which helps keep projects consistent when pairing it with other Omega National wood range hood parts. The red oak material described in the product name provides a solid wood surface that can be finished to coordinate with red oak cabinetry, supporting a unified run of wall cabinets and hood.

Key Cut-To-Size Chimney Details For Installers

• Cut-to-size design described in the web description allows the chimney height to be trimmed from its 23-1/2 inch starting size, which helps installers match varying ceiling heights or design reveals in kitchen layouts.
• The web description notes that these cut-to-size chimneys are specifically designed to fit 30, 36, 42 and 48 inch wide hoods, giving installers coverage across common cooktop widths while keeping the visual proportion of hood and chimney consistent.
• Availability in two heights, 23-1/2 inch and 31 inch as listed, lets specifiers choose a base height that best suits the ceiling and duct path before trimming, which can reduce on-site modification time.
• The SAP description confirms a 36 inch width and 23.5 inch height for this RCH36OUF1 model, giving installers fixed reference dimensions when planning hood placement, wall cabinet spacing and vertical clearances.
• Made in the USA, as stated in the web description, provides a domestic source for this wood range hood chimney, which can matter for project standards that call for U.S.-made components.

Red Oak Chimney Sizing And Hood Fit Planning

The SAP description listing 36W x 23.5H establishes this chimney as a 36 inch wide, 23-1/2 inch high component, giving a clear starting point for both layout drawings and field measurement. The web description describing a cut-to-size chimney means installers can trim the 23-1/2 inch height down as needed, which supports aligning the finished hood stack with crown, soffits or ceiling lines. The statement that these chimneys are specifically designed to fit 30, 36, 42 and 48 inch wide hoods confirms that this 36 inch version fits squarely within that family of sizes, helping projects keep a uniform visual scale between hood body and chimney section.

Using This Signature Chimney In Kitchen Projects

Where This 36 Inch Red Oak Chimney Fits

The product name identifies this as a Wall Mount Chimney for Signature Series Range Hood Covers, so its primary use is on wall-mounted Signature Series wood range hoods rather than island applications. The 36 inch width called out in both the product name and SAP description ties it to 36 inch wide hood covers, which are commonly specified above 36 inch ranges or cooktops in standard kitchen runs. The web description confirms that the cut-to-size chimney line is designed for 30, 36, 42 and 48 inch wide hoods, so this model sits in the middle of that width range, making it a frequent choice on residential wall runs. The red oak material identified in the product name aligns the chimney with red oak cabinet programs, helping designers extend the same wood species from adjacent wall cabinets across the hood feature area. Omega National Products branding positions this chimney inside a coordinated wood range hood system, which is useful when projects call for matching hood covers and chimneys from a single manufacturer line.

Why Cut-To-Size And Height Options Matter

The web description highlighting cut-to-size chimneys means the 23-1/2 inch height on this RCH36OUF1 model can be reduced in the field, which supports precise alignment of the chimney top with ceilings, crown moulding or upper trim details on site. By noting that cut-to-size chimneys are available in two heights, 23-1/2 inch and 31 inch, Omega National Products gives planners flexibility to choose the closer starting height for each project, which helps balance visible proportions while limiting how much material is removed. The SAP description locking this specific chimney at 36W x 23.5H defines its base envelope, so installers can coordinate hood mounting heights relative to cooking surfaces while allowing extra chimney length for trimming. Being part of a line specifically designed to fit 30, 36, 42 and 48 inch wide hoods, as stated in the web description, means dimension relationships are thought through at the product level, supporting consistent reveals between hood body and chimney section across different hood widths. Made in the USA, as the web description states, adds a sourcing detail that can support project documentation when domestic origin is a requirement or preference.

Common Questions About The RCH36OUF1 Chimney

Selecting This 36 Inch Wall Chimney For Hoods

The product name and SAP description together define this unit as a 36 inch wide, 23-1/2 inch high, cut-to-size red oak wall mount chimney dedicated to Signature Series range hood covers, giving clear dimensions and species for project planning. The web description confirming that the cut-to-size chimney line is designed to fit 30, 36, 42 and 48 inch wide hoods shows how this RCH36OUF1 model fits within a broader system of chimney sizes. For projects calling for a 36 inch wall-mounted Signature Series hood in red oak, this Omega National Products chimney provides the matching wood component and trim-to-fit height flexibility needed to complete the hood elevation.