Doug Mockett 6" Diameter Black Trash Grommet 1"H, - TM1-90

Doug Mockett 6 Inch Trash Grommet For Cutouts

Doug Mockett 6 inch trash grommet gives a finished liner for routed or drilled trash openings in cabinet or counter surfaces. The HOLE LINER,BLACK design defines a clean 6 inch diameter opening so waste drops straight through the cutout without catching on raw edges, which keeps the opening neater in daily use. Its 1 inch height provides a low-profile collar around the hole, so the liner protects the opening while staying unobtrusive on the work surface. As a trash grommet from Doug Mockett and Company, Inc., it is built for use where a dedicated trash opening is needed, such as worktops in kitchens or washroom counters. This part belongs to the Replacement Bins and Accessories class, so it suits new installs or swap-out jobs where the existing trash liner needs to match a 6 inch cut.

Key Trash Grommet Details For Daily Use

• The 6 inch diameter opening centers over a matching cutout, guiding trash directly into the bin and reducing waste catching on edges, which supports smoother cleanup around the station.
• The 1 inch high profile forms a short sleeve in the cut surface, helping shield the edge of the routed or drilled hole, which matters when installers want the opening to stay clean-looking over time.
• The HOLE LINER,BLACK finish frames the trash opening with a defined dark ring, visually separating the cutout from the surrounding counter so users can quickly spot the drop zone during busy work periods.
• As part of the Replacement Bins and Accessories product class, this grommet can stand in for worn liners, allowing the opening size and layout to remain the same while refreshing the working edge.
• The Doug Mockett and Company, Inc. branding identifies it as a dedicated trash grommet solution, which helps installers match this 6 inch model to layouts that already specify Mockett trash openings.

Trash Grommet Fit For Routed Or Drilled Holes

This 6 inch diameter trash grommet is described for openings created by routing or drilling a 6 inch hole, so the cut size lines up directly with the TM1-90 liner body. That alignment means the liner shoulders rest on the surface while the sidewalls sit inside the cut, supporting a snug mechanical fit without complex mounting hardware. With its 1 inch height, the liner reaches just enough into the hole to guard the cut edge while staying shallow, which benefits countertops or cabinet tops that must keep a low-profile opening where users work close to the surface.

Where This TM1-90 Trash Grommet Fits Best

Trash Grommet Use In Kitchens And Restrooms

The web description notes plastic and polished stainless steel trash grommets, and states that polished stainless steel liners meet local codes for restaurant kitchens and public restroom installations, showing this trash opening format is used in those environments. That context means the TM1-90 pattern supports layouts where a fixed trash opening over a concealed receptacle is standard, such as counters near food prep or restroom wash areas. In those stations, a defined 6 inch cut managed by this liner keeps the aperture consistent from one top to the next, which helps facilities standardize trash points across multiple rooms or locations. Because the grommet is identified in the Kitchen & Bath Cabinet Accessories category under Trash Bins & Grommets, it aligns with cabinetry-based trash management instead of freestanding cans, which matters when the design calls for integrated waste openings directly through millwork surfaces.

Why The 6 Inch Diameter And Height Matter

The specified 6 inch diameter directly sets the hole size installers create, which simplifies layout work when coordinating with bins or chutes positioned below the surface. That fixed dimension lets shops repeat the same router template across many tops, reducing layout variation from job to job. The 1 inch high collar adds depth at the edge of the opening, helping protect the rim of the routed or drilled hole from direct contact with trash as it passes through, which can support a cleaner-looking edge under regular use. With the SAP description HOLE LINER,BLACK and the manufacturer part number TM1-90, the part is easy to call out on drawings or purchase lists so replacements match the original opening size and appearance. Being part of Wurth Baer Supply's Replacement Bins and Accessories offering also ties this grommet into a broader hardware program, which helps shops keep consistent components across multiple cabinet or countertop projects.

Buyer Questions About This Trash Grommet

Choose This TM1-90 Liner For 6 Inch Openings

The TM1-90 HOLE LINER,BLACK from Doug Mockett and Company, Inc. gives a defined 6 inch, 1 inch high trash opening that fits routed or drilled cutouts used in cabinetry-based waste stations. For projects managed through Wurth Baer Supply, this Replacement Bins and Accessories part lets shops and installers standardize trash cutouts and later match replacements to the same 6 inch opening using a clearly identified, repeatable liner.