Doug Mockett 6" Diameter White Trash Grommet 1"H, - TM1-95

Doug Mockett White Trash Grommet For 6 Inch Openings

Doug Mockett 6 inch diameter white trash grommet defines a clean 6 inch opening in cabinet or counter surfaces, creating a finished liner around a trash drop zone so the cutout edge stays protected and visually neat during daily use. The product is identified as HOLE LINER,WHITE, so it functions as a hole liner that trims the opening and shields the surrounding material from direct contact with waste. Being part of Replacement Bins and Accessories, this grommet serves as a replacement or new-install trim ring that restores worn openings or completes new cutouts without extra fabrication steps. The grommet belongs to the Trash Bins & Grommets group, so it is oriented specifically toward trash drop-through applications where a defined circular opening improves workflow and appearance at the same time.

Key Trash Grommet Details That Support Daily Use

• The grommet is sized for a 6 inch diameter opening, so once the 6 inch cutout is routed or drilled, the liner drops in and provides a consistent throat size that matches common trash drop-through needs.
• The HOLE LINER,WHITE description identifies a white finish, so the visible ring around the opening reads as a uniform, neutral edge detail that blends with many cabinet and counter color schemes in work areas.
• The product sits in the Trash Bins & Grommets category, so it is configured specifically to frame trash openings, helping keep the cut edge away from direct contact with debris during routine clearing or bussing.
• The product is listed under Replacement Bins and Accessories, meaning it can be used when refreshing an existing trash opening, so worn or rough cutout edges can be covered by a new, clean liner component.
• The brand is Doug Mockett and Company, Inc., so the grommet aligns with a recognized architectural hardware line, which helps installers match this liner style with related trash grommets on similar projects.

6 Inch Trash Grommet Installation And Hole Preparation

The web description notes simple installation, just rout or drill a 6 inch hole and insert liner, so the field work centers on accurate hole sizing rather than complex hardware. That detail means installers can use standard hole cutting or routing methods, then drop the HOLE LINER,WHITE into the opening as the finishing step. Because the liner is defined as a trash grommet, positioning the hole directly over a waste receptacle channels debris straight through the 6 inch throat, so the surrounding countertop or cabinet surface stays dedicated to work tasks instead of waste collection.

Using This Trash Grommet In Commercial And Cabinet Work

Where This 6 Inch Trash Grommet Is Commonly Applied

The product is part of Kitchen & Bath Cabinet Accessories, so it fits naturally into counter or cabinet top layouts where a direct trash drop improves workflow. It is described as a trash grommet, so its role is to frame a dedicated trash opening rather than a general cable or vent pass-through, which focuses its use on waste handling points. The description references restaurant kitchens, so this liner style connects to commercial food-service counters where staff sweep scrap directly toward a 6 inch opening during prep or cleanup. Public restroom installations are also referenced, so the same grommet format can define a trash drop in restroom counters, guiding paper waste into concealed receptacles below while leaving the top surface looking controlled and deliberate.

Details That Support Consistent Openings And Code Needs

The description notes plastic and polished stainless steel trash grommets, which means the line covers both material types so projects that reference polished stainless steel liners for local codes in restaurant kitchens and public restrooms can align the liner material with those requirements. Polished stainless steel liners meet local codes for restaurant kitchens and public restroom installations, so using a polished stainless option within this trash grommet line allows the opening trim to participate in code-driven material choices at the waste opening. For this HOLE LINER,WHITE version, the white identity provides a defined contrast to stainless or darker surfaces, which gives staff and users a clear visual target for the 6 inch trash drop point along a run of cabinetry or counter sections.

Common Questions About The TM1-95 Trash Grommet

Selecting The TM1-95 Grommet For Your Next Cutout

The Doug Mockett 6 inch diameter white trash grommet TM1-95 offers a defined hole liner for trash openings that are routed or drilled to 6 inches, so it fits directly into common counter and cabinet layouts. With its role as a HOLE LINER,WHITE in the Trash Bins & Grommets category, it matches applications where a clean, white trim ring around the trash drop improves both appearance and day-to-day clearing. For projects needing a straightforward trash opening detail backed by the Doug Mockett and Company, Inc. line, this TM1-95 grommet provides a focused option for specifying or replacing a 6 inch trash cutout.