Polished Stainless Steel Trash Grommet For Cutouts

polished stainless steel trash grommet from Doug Mockett and Company, Inc. creates a finished opening in counter surfaces for waste drop-throughs. The 6 inch diameter design defines a clean edge around the cutout so the opening looks intentional and professional in service areas. The grommet height of 1 inch gives a low-profile collar, which helps guide trash into the receptacle while keeping the edge of the counter protected from impact and wear. Construction in plastic and polished stainless steel combines a rigid trim body with a metal liner surface, which supports long-term use in busy environments where the opening is used repeatedly. The polished stainless steel liner meets local codes for restaurant kitchens and public restroom installations, so the opening can be used in commercial locations that require metal contact surfaces around waste areas. Manufacturer part number TM1-PSS identifies this specific size and finish for matching future installations or replacements.

Key Trash Grommet Details That Support Daily Use

• The 6 inch diameter size defines a generous waste opening, which helps staff drop waste quickly without aiming precisely and keeps workflow moving at service counters.
• The 1 inch high grommet profile raises a smooth collar around the cutout, which helps shield the counter edge from chipping and directs trash down into the bin.
• Plastic and polished stainless steel construction provides a stable trim structure with a metal liner surface, which suits repeated contact from containers and waste without exposing raw counter material.
• The polished stainless steel liner meets local codes for restaurant kitchens and public restroom installations, which supports use in regulated commercial environments where specific materials are required around waste points.
• Branding from Doug Mockett and Company, Inc. and the TM1-PSS part number tie the grommet to a defined product line, which helps match additional openings or replacements across multiple stations.

Cutout Details For Installing The Trash Grommet

The web description specifies that installation uses a routed or drilled cutout, so the opening can be prepared with standard shop tools before cabinetry leaves the shop. A 6 inch hole can be routed or drilled to accept this 6 inch diameter grommet, which simplifies layout when planning the waste opening in counters or work surfaces. The same description notes that a simple installation approach is used, where the installer routs or drills the hole and then inserts the liner, which reduces installation steps at the jobsite. The option to use a 6 inch or 8 inch hole in the description indicates that this style of trash grommet fits into commonly used large-hole sizes, allowing integration into existing fabrication workflows that already rely on those diameters.

Where This Trash Grommet Works And Why Details Matter

Using The TM1-PSS Grommet In Service Areas

The TM1-PSS polished stainless steel trash grommet is identified in the category of kitchen and bath cabinet trash bins and grommets, placing it squarely in the role of a counter waste opening for cabinetry-based workstations. Its polished stainless steel liner meets local codes for restaurant kitchens, which positions it well for counters in food prep or service zones where waste needs to drop directly into under-counter receptacles. The same liner also meets local codes for public restroom installations, so it suits restroom counters where paper waste is pushed through the surface into bins below. The 6 inch diameter shape provides a sizeable target in these environments, giving users enough room to push waste through without contacting the counter edge. With a 1 inch high profile, the grommet defines the edge of the opening clearly, which helps users recognize the drop zone and reduces stray contact with the counter surface.

Design And Installation Choices That Improve Workflow

The combination of plastic and polished stainless steel in the trash grommet design affects both appearance and long-term function on the job. The plastic structure supports the opening and helps secure the liner within the counter thickness, while the polished stainless steel liner presents a metal contact surface that stands up to repeated waste movement. Because the liner meets local codes for restaurant kitchens and public restroom installations, specifiers can rely on the stainless steel material choice when planning cabinetry for regulated projects. The instruction to rout or drill a 6 inch or 8 inch hole and insert the liner describes a straightforward installation sequence, so fabricators can cut the required hole diameter with standard tooling and then drop in the grommet during assembly. The 6 inch diameter dimension aligns with the 6 inch hole commentary, which simplifies layout when plotting the centerline of the opening relative to cabinet framing or support structures. With the TM1-PSS manufacturer part designation, multiple openings across a facility can use the same grommet, which promotes visual consistency at all waste stations while keeping replacement part identification clear.

Common Questions About The TM1-PSS Trash Grommet

Selecting This Trash Grommet For Your Project

The Doug Mockett 6 inch diameter polished stainless steel trash grommet TM1-PSS provides a defined 1 inch high collar around a routed or drilled 6 inch opening, giving waste stations in restaurant kitchens and public restrooms a clean, code-conscious finish. The plastic and polished stainless steel construction, along with the clear TM1-PSS part reference, allows fabricators and installers to specify a consistent opening style across cabinetry runs. For projects that require a counter-mounted trash opening with a polished stainless steel liner that meets local codes, this grommet aligns the cutout size, material requirements, and appearance in a straightforward installation approach.