Doug Mockett Trash Grommet For Waste Openings

Doug Mockett trash grommet 6 inch diameter light gray is a plastic hole liner designed to finish a routed or drilled trash opening, so the cut edge stays protected and the opening has a clean, defined look. The 1 inch height creates a short collar around the hole, which helps guide waste straight through the opening instead of scuffing surrounding surfaces. As part of Doug Mockett and Company, Inc. trash grommets, this TM1-92 model fits into a 6 inch cutout, giving a consistent opening size from top to bottom in counters or cabinet tops. The light gray color provides a neutral edge around the opening, which helps the liner blend into many laminate or solid surface schemes in kitchen and bath cabinets. Sold in both broken and full box quantities, this grommet supports small repair jobs and larger shop runs ordered through Wurth Baer Supply.

Key Trash Grommet Details For Daily Use

• The 6 inch diameter design sets a standard opening size for waste drops, which helps align the liner with commonly routed counter holes in kitchen and bath cabinet projects.
• The 1 inch height provides a low-profile vertical wall around the hole, which helps keep the counter edge from chipping during repeated contact with trash or containers.
• The light gray plastic construction gives the hole liner a neutral appearance, which helps it sit discretely in cabinet tops or counters without drawing attention to the waste opening.
• Trash grommets in this series are offered in plastic and polished stainless steel, which lets the installer match material to kitchen, restroom, or service-area code requirements.
• Polished stainless steel liners meet local codes for restaurant kitchens and public restroom installations, which supports code-compliant waste openings in high-traffic commercial areas.

Installation Approach For 6 Inch Hole Liner

This Doug Mockett TM1-92 light gray trash grommet installs by routing or drilling a 6 inch hole and inserting the liner, so the workflow stays straightforward on both laminate and solid surface tops. The simple installation method allows the installer to use standard 6 inch hole saws or router templates already in the shop, which helps keep setup time down on repetitive cabinet-top cutouts. Once the 6 inch opening is prepared, the plastic liner drops into place to define the edge, so there is no extra fitting sequence beyond cutting to the correct size. Using a single 6 inch dimension for the opening also supports consistent layout across multiple cabinets or counters, which matters when aligning waste openings with bins or under-counter receptacles.

Using TM1-92 Trash Grommet In Real Projects

Where This 6 Inch Hole Liner Fits Best

The TM1-92 6 inch diameter light gray trash grommet works in kitchen and bath cabinet applications where a finished waste opening is needed in a horizontal surface. In restaurant kitchens, polished stainless steel liners from the same trash grommet family meet local codes, so the opening can be finished to match regulated back-of-house prep or service counters. In public restroom installations, those stainless steel liners also meet local codes, giving maintenance staff a defined opening edge that tolerates frequent use around sinks or counters. The plastic TM1-92 light gray liner fits into the same 6 inch opening size, so shop layouts can stay consistent whether the job calls for plastic or stainless versions in different areas of a project.

Why Dimensions And Material Support Workflow

The 6 inch diameter cut requirement means the installer can standardize tooling on a single hole size, which helps speed up repetitive counter runs and reduces layout variation from one opening to the next. The 1 inch height keeps the collar low enough to stay out of the way on working surfaces, while still shielding the cut edge from direct impact, which helps the opening maintain a clean profile after repeated trash drops. Plastic construction on the light gray TM1-92 liner keeps the part lightweight during handling, which simplifies placement in the routed or drilled hole during installation. Having plastic and polished stainless steel options in the same trash grommet family allows the shop to respond to different area needs on the same job, such as standard cabinet tops in one zone and code-driven restaurant kitchens or public restroom counters in another.

Common Questions About TM1-92 Trash Grommet

Select TM1-92 Trash Grommet For Clean Openings

The TM1-92 Doug Mockett trash grommet pairs a 6 inch diameter opening with a 1 inch high light gray plastic liner, giving cabinet and counter projects a defined waste drop edge. For commercial zones that call for polished stainless steel, related liners in this trash grommet family meet local codes for restaurant kitchens and public restroom installations, so one product line can support different areas of the same project. Order this trash grommet from Wurth Baer Supply to standardize hole sizing and finish across new installations or replacements.