Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock EssentialZ pull 128mm center to center identifies this pull as part of Amerock's Essential'Z collection with a 5-1/16 in (128 mm) center-to-center mounting, so it lines up with standard drilling patterns on many cabinet and drawer fronts. The pull is described as having a seamless blend of clean lines and subtle curves, which gives cabinets a straightforward modern look that still softens sharp edges on face frames and drawer fronts. The antique nickel finish defines the surface color and sheen, so it coordinates with other antique nickel decorative hardware in the same room. The pull length is 5-7/8 in, which spans wider than the bore centers to give good grip area across typical kitchen or bath drawer widths. A projection of 1-3/8 in sets how far the pull stands off the surface, creating finger clearance for everyday opening and closing.
The 5-1/16 in (128 mm) center-to-center measurement fixes the distance between mounting holes, so layout on cabinet doors or drawers follows a repeatable measurement across a run of fronts. Because the overall length is 5-7/8 in, the ends extend past the holes, which gives a symmetrical reveal on both sides of the fasteners when viewed on wide or narrow fronts. The 1-3/8 in projection defines how far the hand sits from the cabinet surface, helping reduce knuckle contact with door faces when pulling open. With a 1/2 in width, the front bar appears slim while still offering a defined edge for fingers to catch as they pull. The Amerock BP24002AN part number identifies this exact combination of Essential'Z collection style, antique nickel finish, and 128 mm center-to-center size.
The Essential'Z collection description of clean lines and subtle curves positions this pull for cabinets where a simple, modern profile is wanted without sharp, square corners on the grip. The antique nickel finish defines the visual tone, working wherever that muted metal color is part of the overall hardware scheme for a kitchen, bath, or built-in. Because the center-to-center is specified at 5-1/16 in (128 mm), this pull matches layouts based on that drilling dimension, which is common on many contemporary cabinets. The 5-7/8 in length allows the pull to sit comfortably on mid-size to larger drawer fronts, giving balance between the hardware and the panel width.
The 5-1/16 in (128 mm) center-to-center spacing lets installers work from a single measurement across all doors and drawers, which supports straight, aligned hardware runs on upper and lower cabinets. With the projection set at 1-3/8 in, the distance from the cabinet face to the front of the pull is predefined, so the same level of finger clearance repeats wherever this model is installed. The 1/2 in width determines the thickness of the visible front bar, which helps keep alignment lines tight when several pulls are mounted side by side on a bank of drawers. Zinc die-cast construction gives the pull its shaped profile, so every piece in the Essential'Z series with this part number presents the same curves, lines, and contact surfaces from one cabinet front to the next.
The Amerock Essential'Z pull has a 5-1/16 in (128 mm) center-to-center size, so hole spacing for installation follows that exact dimension across cabinet doors and drawers.
The Amerock BP24002AN Essential'Z pull length is 5-7/8 in, giving extra handle beyond the mounting points for grip and visual balance on cabinet fronts.
This antique nickel Essential'Z pull has a 1-3/8 in projection, setting how far it stands off the door or drawer face for finger clearance when opening.
The Essential'Z series pull is made from zinc die-cast material, providing a formed metal body that carries the collection's clean lines and subtle curves.
The Amerock Essential'Z cabinet handle uses an antique nickel finish, so it visually matches other antique nickel decorative hardware in the same space.
The Amerock BP24002AN part number specifies this Essential'Z collection pull in antique nickel with a 5-1/16 in (128 mm) center-to-center mounting dimension.
The Amerock Essential'Z series 5-1/16 in (128 mm) center-to-center antique nickel pull brings a defined combination of collection styling, finish, and dimensions to cabinet work. By using the 5-7/8 in overall length, 1-3/8 in projection, and 1/2 in width values, installers can match this pull to door and drawer sizes where those proportions feel balanced. The zinc die-cast construction and antique nickel finish under the Amerock BP24002AN part number keep the visual and dimensional details consistent whenever this model is selected across a full room of cabinetry.
Sold In: 1 Each
