Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Essential'Z pull gives a cabinet and drawer installation a straight, modern line with softened edges, because its design combines clean lines with subtle curves. The satin nickel finish creates a neutral metallic look that blends with many hinge and appliance finishes, which helps maintain a consistent appearance across a run of cabinets. The pull is 7-5/8 in long overall, so it visually suits medium and larger cabinet doors or wider drawer fronts on typical kitchen or shop casework. Its 1-7/16 in projection establishes comfortable finger clearance from the cabinet face, supporting easy gripping even on deeper drawer fronts. A width of 1/2 in presents a slim front profile, so the pull reads as a refined bar rather than a bulky handle on face frames or slab doors.
The 6-5/16 in (160 mm) center-to-center measurement defines exactly where fastener holes land, so layout for doors and drawers can follow a single drilling pattern across multiple openings. This spacing works with many cabinet design grids using metric or imperial references, which helps align the Essential'Z pull with common shop jigs or drilling templates. The 7-5/8 in overall length means the handle extends beyond the fastener points enough to clear frame edges, supporting placement near the center of drawer fronts without interference. Combined with a 1-7/16 in projection, the pull stands off the surface at a depth that feels natural to grab during use while remaining close enough to the face to avoid catching on clothing in tight galley or workroom layouts.
The Amerock Essential'Z pull belongs in decorative hardware and moldings under handles and pulls, so it suits cabinet doors and drawer fronts in kitchen, bath, office, or shop casework. Its satin nickel finish coordinates with many brushed nickel faucets, hinges, and lighting, which helps unify hardware across a room built around similar tones. The 160 mm center-to-center dimension makes it a solid match for cabinets laid out on metric spacing, while still aligning with 6-5/16 in patterns in imperial shops. With a total length of 7-5/8 in, the pull visually fits mid-size and wider fronts, which supports using a single model across base cabinets, tall pantry doors, and broad drawers for a consistent run. The 1-7/16 in projection keeps the hand clear of applied trim profiles, which is practical on routed or shaker-style doors.
The defined 6-5/16 in (160 mm) center-to-center dimension lets installers build or choose drilling jigs keyed to this exact spacing, which speeds repetitive hardware installation on multi-cabinet jobs. The 1/2 in width concentrates the pull over a narrow footprint, which allows precise placement on slender rails without overhanging, helping hardware lines stay centered visually. A 7-5/8 in overall length gives clear reference points from each end, which aids layout when marking hole centers from door or drawer edges. The 1-7/16 in projection sets a predictable standoff, which keeps the pull parallel to fronts for a uniform shadow line down a bank of cabinets. Constructed from zinc die-cast material, the pull provides a stable base around each mounting point, which supports long-term alignment where doors and drawers see daily opening cycles.
The Amerock Essential'Z pull has a 6-5/16 in (160 mm) center-to-center size, which sets the hole spacing used for drilling and helps match layouts based on this common dimension.
The Amerock BP29423G10 pull measures 7-5/8 in overall length, giving it coverage that suits medium and wider cabinet doors or drawer fronts without appearing too short.
The satin nickel cabinet pull projects 1-7/16 in from the cabinet face, providing comfortable hand clearance for gripping while keeping the handle close for a tidy profile.
The Amerock Essential'Z BP29423G10 pull is zinc die-cast, giving it a solid metal construction suitable for frequent door and drawer operation in cabinetry.
This cabinet pull has a 1/2 in width at the front face, which keeps its appearance slim while still offering enough surface area for a secure fingertip grip.
The Amerock Essential'Z BP29423G10 uses a satin nickel finish, providing a muted metallic look that coordinates well with many brushed fixtures and cabinet hinges.
The Amerock Essential'Z pull with 6-5/16 in (160 mm) center-to-center spacing, 7-5/8 in length, and 1-7/16 in projection offers a defined hardware pattern for cabinets using satin nickel trim. Select this BP29423G10 model when a cabinet or drawer run calls for a zinc die-cast handle that matches 160 mm layouts and keeps a slim 1/2 in face width. Its role within decorative hardware and moldings under handles and pulls makes it a straightforward option for projects targeting a clean, coordinated satin nickel appearance.
Sold In: 1 Each
