Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Essential'Z pull is a 3-3/4 in (96 mm) center to center cabinet pull designed to bridge drawers or doors with a consistent, repeatable drill pattern. The pull uses a 3-3/4 in (96 mm) center-to-center dimension, which matches common boring setups and helps keep multiple fronts aligned across a run of cabinets. Its overall length of 5-1/8 in (130 mm) gives fingers more room to grab, which supports comfortable everyday use on doors and drawers. The pull projects 1-1/4 in (32 mm) off the face, creating space for a solid handhold without crowding adjacent fronts. A width of 7/16 in (11 mm) provides a slim look while still giving enough edge for a confident pull. The satin nickel finish delivers a muted metallic appearance that fits a wide range of cabinet finishes without dominating the design.
This Amerock cabinet pull uses a 3-3/4 in (96 mm) center-to-center spacing, so the mounting holes are set to a common cabinet drilling standard that suits many residential and commercial layouts. With an overall length of 5-1/8 in (130 mm), the pull sits proportionally on typical cabinet doors and drawer fronts, helping maintain even sight lines when installed in rows. The 1-1/4 in (32 mm) projection establishes working clearance between the hand and the cabinet face, which is useful where doors open near walls or other cabinets. A width of 7/16 in (11 mm) keeps the pull visually light while still reading as a clear hardware line on painted or stained fronts. The Amerock BP29415G10 part number ties directly to this specific Essential'Z Series satin nickel cabinet pull for precise product selection and repeat reorders.
The Amerock Essential'Z Series 3-3/4 in (95 mm) center to center satin nickel pull is suited to cabinet and drawer fronts that match a 3-3/4 in (96 mm) drilling pattern, giving installers a straightforward layout across kitchens, baths, and built-ins that use this spacing. Its 5-1/8 in (130 mm) overall length places grip points closer to the center of typical drawer fronts, which supports smooth operation when drawers are loaded. The 1-1/4 in (32 mm) projection provides finger room away from surrounding edges, which is helpful on face frames or frameless cabinets positioned tightly together. At 7/16 in (11 mm) width, the pull reads as a slim line on the door or drawer, which can be useful where a cleaner, less bulky appearance is desired on modern or transitional fronts. The satin nickel finish allows this pull to coordinate with other satin nickel decorative hardware and moldings on the same job, supporting a unified look across cabinet runs.
The 3-3/4 in (96 mm) center-to-center dimension on this Amerock BP29415G10 pull lines up with common boring jigs, which helps installers repeat the same hole pattern quickly across multiple cabinets. That fixed spacing simplifies layout when matching existing 3-3/4 in hardware during updates, because the holes align with the original pattern. The zinc die-cast construction provides a single-piece body for the pull, which supports consistent geometry so each unit seats similarly against the cabinet face. The 1-1/4 in (32 mm) projection keeps the gripping surface away from the door or drawer, which can reduce contact marks on the finish over time from frequent hand use. A 7/16 in (11 mm) width offers enough surface for a secure grasp while still staying narrow, which can help maintain clearances where fronts meet tight reveals. The satin nickel finish delivers a steady, low-glare appearance, which can help visually tie multiple pulls together across a large bank of cabinets.
The Amerock Essential'Z pull has a 3-3/4 in (96 mm) center-to-center size, which sets the drill hole spacing and helps align multiple pulls along cabinet doors and drawers.
The pull length is 5-1/8 in (130 mm), giving a comfortable span on typical cabinet doors and drawers and helping the hardware look proportionate on standard fronts.
This cabinet pull projects 1-1/4 in (32 mm) from the cabinet surface, creating finger clearance behind the pull for a solid grip during everyday opening and closing.
The Essential'Z Series pull is made from zinc die-cast material, providing a solid casting that supports consistent sizing across multiple pulls on the same project.
This Amerock Essential'Z pull has a satin nickel finish, giving a soft metallic look that coordinates with other satin nickel decorative cabinet hardware.
The pull width is 7/16 in (11 mm), creating a slim profile that still offers a defined edge for the hand while keeping the visual line narrow on the cabinet front.
The Amerock Essential'Z Series 3-3/4 in (96 mm) center to center satin nickel pull BP29415G10 from Wurth Baer Supply aligns with common cabinet drilling patterns and everyday gripping needs. Use the verified 3-3/4 in (96 mm) center-to-center, 5-1/8 in (130 mm) length, 1-1/4 in (32 mm) projection, and 7/16 in (11 mm) width details to match this pull to your cabinet door and drawer layouts. Pair the satin nickel finish and zinc die-cast construction with projects that call for consistent appearance and dependable sizing across multiple pulls.
Sold In: 1 Each
