Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock EssentialZ 3 in pull is a zinc die-cast cabinet pull in the Essential'Z collection with a satin nickel finish, so it delivers a consistent modern look while using a stable base material for everyday cabinet door and drawer use. The 3 in (76 mm) center-to-center dimension positions the mounting holes at a common spacing, which helps align multiple pulls in a straight line across cabinet runs. The overall 4-5/8 in (117 mm) length gives the hand extra contact area, which supports a firm grasp when opening heavier fronts. A 1 in (25 mm) projection stands the pull off the face of the cabinet, creating clearance for fingers without bringing the pull too far into the workspace. The 1/2 in (13 mm) width keeps the profile slim, which helps this pull sit neatly on narrow rails or smaller drawer fronts.
The 3 in (76 mm) center-to-center drilling dimension defines the hole spacing for this Amerock pull, so the installer can mark and drill cabinet doors and drawers using that fixed measurement. The 4-5/8 in (117 mm) overall length gives a clear sense of how much linear space the pull occupies, which helps with positioning on smaller fronts where edge distance matters. The 1 in (25 mm) projection sets how far the pull stands off the face, which keeps knuckles away from the cabinet surface during operation. The 1/2 in (13 mm) width outlines the front profile, which helps plan layout when working near glass inserts, applied moldings, or tight frame members.
The Amerock EssentialZ 3 in pull sits in the Decorative Hardware & Moldings category under Handles and Pulls, so it is suited to cabinet doors and drawers where a handle-style pull is required. The Essential'Z collection combines clean lines and subtle curves, which helps it integrate into a range of cabinet styles from straightforward utility runs to more finished residential or light commercial spaces. With a 3 in (76 mm) center-to-center measurement and 4-5/8 in (117 mm) overall length, this pull fits comfortably on common drawer widths and standard door rails, giving proportional coverage without overpowering the face. The satin nickel finish ties into projects that already use satin nickel decorative hardware, supporting a single finish scheme across hinges, knobs, and other pulls. The zinc die-cast construction gives a solid-feeling pull body, which supports repeated daily use across kitchen, bath, or shop cabinetry.
The fixed 3 in (76 mm) center-to-center dimension allows installers to use templates or jigs set to that spacing, which speeds repetitive drilling across larger cabinet jobs. The overall 4-5/8 in (117 mm) length and 1/2 in (13 mm) width define the footprint on the front, which helps with aligning pulls to panel reveals, frame members, or drawer edges for a consistent visual grid. The 1 in (25 mm) projection establishes how far the hand sits from the door surface, which can reduce contact with finished faces as users open and close fronts. The satin nickel finish provides a unified appearance across every pull ordered under the same Amerock BP19259G10 part number, which supports repeatable results on multi-unit installations. The zinc die-cast material creates a stable threaded area around the screw interface, which supports firm attachment to the cabinet face.
The Amerock EssentialZ 3 in pull has a 3 in (76 mm) center-to-center dimension, which sets the spacing for the mounting holes on cabinet doors and drawers.
The Amerock BP19259G10 pull has an overall length of 4-5/8 in (117 mm), which shows how much space it occupies on the cabinet face from end to end.
The Amerock EssentialZ pull is made from zinc die-cast, which provides a solid body that supports secure fastening to cabinet doors and drawers.
This Amerock EssentialZ 3 in pull has a 1 in (25 mm) projection, which sets the clearance between the pull and the cabinet surface for finger access.
The Amerock BP19259G10 pull has a 1/2 in (13 mm) width, which defines the front profile dimension visible on the cabinet face.
The Amerock EssentialZ pull uses a satin nickel finish, which allows it to coordinate with other satin nickel cabinet hardware on the same project.
The Amerock EssentialZ 3 in pull combines a 3 in (76 mm) center-to-center layout, zinc die-cast construction, and satin nickel finish, so it aligns with common drilling patterns while matching satin nickel decorative hardware. The 4-5/8 in (117 mm) overall length, 1 in (25 mm) projection, and 1/2 in (13 mm) width define a compact footprint that suits many cabinet door and drawer sizes. For projects calling for Amerock BP19259G10 by part number, this pull delivers those exact dimensions and finish in the Essential'Z collection.
Sold In: 1 Each
