BZ-100 Timberline Bezel, Nickel

BZ-100 Timberline Bezel, Nickel For Lock Cylinders

BZ-100 Timberline Bezel, Nickel is a trim bezel from CompX Timberline Lock that allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so existing boring patterns can accept the lock hardware without re-drilling the panel. The bezel is designed for use with locks in 7/8 inch thick panels, which lets you match common panel build-ups in cabinetry or fixture work while keeping the lock face properly seated. The nickel finish defines the visible trim, giving a consistent metal appearance around the cylinder face anywhere the lock is mounted. As a trim bezel in the lock accessories category, it works as the finishing ring around the cylinder body, tying the cylinder fit and panel thickness together in one step.

Key Trim Bezel Details For Daily Jobs

• The bezel allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so a single part can bridge different standard bore sizes across a project without layout changes.
• The same bezel permitting use of locks in 7/8 inch thick panels means one component handles typical cabinet side or door thickness in many woodworking installations, simplifying panel preparation.
• The product is identified as BZ-100 Timberline Bezel, Nickel from CompX Timberline Lock, which ties the trim piece directly to the Timberline lock family for straightforward selection when matching existing cylinders.
• The trim bezel classification places this part in the visible lock trim area, so it finishes the cylinder opening with a defined metal ring that frames the lock face on the panel surface.
• The nickel description establishes the surface appearance, so the bezel can align visually with other nickel-colored lock and hinge hardware on the same cabinet or fixture.

Trim Bezel Fit For Panel Holes And Thickness

This nickel trim bezel allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so existing boring in doors, drawer fronts, or panels can stay unchanged while the lock cylinder locates correctly in the opening. The same bezel permits use of locks in 7/8 inch thick panels, which supports typical cabinet construction where thicker stock or laminated build-ups are used without changing the lock choice. As a CompX Timberline Lock trim bezel, it works with cylinder bodies in that line so the face of the lock sits cleanly against the panel surface while the body passes through the prepared hole.

Using This Timberline Lock Trim Bezel On Projects

Where The BZ-100 Timberline Bezel, Nickel Fits Best

This product is a BZ-100 Timberline Bezel, Nickel from CompX Timberline Lock, so it fits into projects using Timberline cylinder bodies where a dedicated trim ring is required around the lock face. The bezel allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, which means it suits cabinet doors, drawer fronts, and panels bored within that range in woodworking or fixture applications. Because it permits use of locks in 7/8 inch thick panels, it is suited to many cabinet sides, thicker drawer fronts, or laminated panels that reach that thickness, keeping the visible lock trim aligned with the finished face.

Why Hole Size And Panel Thickness Details Matter

The ability to use cylinder bodies with 3/4 inch through 7/8 inch diameter holes reduces rework when layout or machining already follows those dimensions, so the installer can seat the lock cylinder in the existing bore while the bezel closes the gap at the surface. When the bezel permits use of locks in 7/8 inch thick panels, the cylinder body can extend through heavier construction without changing the panel design, while the front trim remains tight to the face for a clean edge. As a trim bezel in the lock accessories group, this part defines the transition between the cylinder and the panel opening, which helps keep the lock appearance consistent across multiple doors and panels on the same run. The nickel finish gives the bezel a defined metal look around the cylinder face, supporting a unified appearance wherever CompX Timberline Lock components are used together.

Common Questions About This Nickel Trim Bezel

Selecting This Bezel For Timberline Lock Work

The BZ-100 Timberline Bezel, Nickel from CompX Timberline Lock allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes and permits use of locks in 7/8 inch thick panels, so it connects common bore sizes and panel thickness with one trim solution. For cabinet, fixture, or millwork jobs using Timberline cylinders and nickel-colored hardware, this trim bezel provides the defined ring at the lock face that ties the cylinder opening to the surrounding panel.