BZ-500 Timberline Bezel, Bright Brass

BZ-500 Timberline Bezel Bright Brass Function

BZ-500 Timberline bezel bright brass is a trim bezel from the CompX Timberline Lock line that allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so existing boring patterns can be put to work without re-drilling. This bezel is described as polished brass, so the bright brass finish presents a clean trim look around the lock cylinder on doors or panels. As a trim bezel in the locks and latches lock accessories class, it frames the cylinder body, which helps give the lock installation a finished appearance. The bezel works with holes from 3/4 inch up to 7/8 inch in diameter, so one part covers a common range of lock prep sizes on cabinets and fixtures. With the manufacturer part number BZ-500 clearly identified, it is straightforward to match this bezel to CompX Timberline Lock components on replacement or new builds.

Bright Brass Timberline Bezel Job-Focused Details

• The BZ-500 Timberline bezel is identified as a trim bezel, so it finishes the edge of the lock cylinder opening and gives a neat, professional transition between the cylinder body and the panel face.
• The description states that it allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so a single bezel adapts cylinders to that hole range and keeps boring layouts consistent across different cabinet runs.
• The bezel permits use of locks in 7/8 inch thick panels, so installers can mount compatible locks into thicker doors or drawer fronts without changing panel construction just to suit the hardware.
• The finish is described as polished brass, so the bright brass appearance coordinates visually with brass lock cylinders and nearby decorative hardware for a uniform look on visible cabinet faces.
• The product sits in the locks and latches lock accessories category, so it is intended to work as part of a lock assembly and helps tie the cylinder body into the overall lock hardware system.

Timberline Bezel Fit For Holes And Panels

This CompX Timberline lock bezel is described as allowing cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so it aligns the cylinder body with those hole sizes and supports consistent fit across multiple casework layouts. Because it permits use of locks in 7/8 inch thick panels, it addresses common cabinet and fixture thicknesses where standard components might otherwise sit awkwardly, helping the cylinder seat properly in deeper fronts. As a bright polished brass trim bezel, it finishes the lock opening so the cylinder body does not bear directly on the raw bore edge, which supports a cleaner edge around the hole over repeated uses of the door or drawer.

Using The BZ-500 Trim Bezel In Lock Work

Where The Bright Brass BZ-500 Bezel Is Used

The BZ-500 Timberline bezel, identified in the locks and latches lock accessories category, is used anywhere a CompX Timberline Lock cylinder body needs a trim ring around the hole, such as cabinet doors, drawers, or panel doors in woodworking projects. Because it allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, it fits projects that already have these standard boring sizes, such as shop-built cabinets or commercial fixtures that follow common drilling jigs. The bezel also permits use of locks in 7/8 inch thick panels, so it serves on thicker fronts often found in woodworking and casework supplied by Wurth Baer Supply customers. With the bright polished brass description, it suits applications where the visible trim needs to match or coordinate with brass-finished cylinders or nearby hinges and pulls. The manufacturer part number BZ-500 ties it specifically to the CompX Timberline Lock family, so it lines up with that lock system in shops that standardize on Timberline components.

Why BZ-500 Dimensions Support Repeatable Results

The specified 3/4 inch through 7/8 inch diameter hole range on this trim bezel means that once a shop commits to those bore sizes, the same BZ-500 piece can finish multiple openings without changing drilling setups, which supports repeatable layouts on production runs. Because it permits use of locks in 7/8 inch thick panels, fabricators can keep preferred panel build-ups and still fit the lock cylinder with this bezel, which reduces the need to alter material thickness just to suit the lock edge detail. As a polished bright brass bezel from the CompX Timberline Lock line, it provides a consistent visual reference point around every cylinder, so each installation looks uniform when multiple doors or drawers are lined up. The classification as a trim bezel within locks and latches also signals that it is a dedicated finishing ring for the cylinder body, which helps keep the bore edge visually tidy and can make minor variances in drilling less noticeable across finished casework. The clearly stated manufacturer part number BZ-500 helps shops reorder the same bezel for future jobs, which keeps replacements or expansions visually and dimensionally consistent with earlier work.

Common Questions About The BZ-500 Bright Brass Bezel

Selecting The BZ-500 Bezel For Your Lock Work

The BZ-500 Timberline bezel bright brass described by Wurth Baer Supply as a polished brass trim bezel lets cylinder bodies be used with 3/4 inch through 7/8 inch diameter holes and in 7/8 inch thick panels, so it slots into standard cabinet lock preparations. With its role as a locks and latches lock accessories trim bezel in the CompX Timberline Lock family, it lines up with Timberline cylinders on woodworking and cabinet projects. Using the BZ-500 manufacturer part number, it is straightforward to match this bright brass bezel to current or future lock layouts on your jobs.