BZ-700 Timberline Bezel, Satin Nickel

BZ-700 Timberline Bezel For Lock Cylinders

BZ-700 Timberline bezel is a satin nickel trim bezel from CompX Timberline Lock that allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so you can match common boring sizes in cabinet and fixture work. This bezel is part of the trim bezels product class, giving a finished edge around the lock cylinder while tying into other hardware in satin nickel. Because it permits use of locks in 7/8 inch thick panels, it supports thicker cabinet doors or panels without changing your lock boring layout. Sold in both broken and full box quantities with a discount available for full box orders, it fits small runs or larger production needs on the same part number.

Trim Bezel Details That Support Daily Work

• The bezel allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so one trim part can serve the most common lock bore sizes in shop and field work.
• It permits use of locks in 7/8 inch thick panels, which supports applications on thicker cabinet doors, drawer fronts, or partitions without rethinking the lock hole size.
• The satin nickel description defines a consistent appearance around the lock face, helping the lock area visually match other satin nickel cabinet hardware on the job.
• The bezel falls under the trim bezels product class for CompX Timberline Lock, so it is intended to finish the cylinder edge and present a clean, defined lock perimeter.
• Sold in both broken and full box quantities with a discount available for full box orders, this bezel lets shops pull what they need for service jobs or stock up for production runs.

Bezel Use With Hole Size And Panel Thickness

This satin nickel bezel allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so existing bores in that range can accept the lock trim without reboring. Because it permits use of locks in 7/8 inch thick panels, it supports thicker casework sides, doors, or drawer fronts where standard-thickness assumptions no longer apply. Working as a trim bezel in the locks and latches accessory category, it frames the cylinder body while respecting the bored hole size and panel thickness already chosen in the layout.

Using This Satin Nickel Trim Bezel Effectively

Where The BZ-700 Timberline Bezel Fits Best

The BZ-700 Timberline bezel is described for cylinder bodies used with 3/4 inch through 7/8 inch diameter holes, so it lines up with typical lock boring practice in many cabinet and fixture projects. Because it permits use of locks in 7/8 inch thick panels, it serves applications that use thicker fronts, tall partitions, or reinforced panels around lock locations. Its satin nickel description ties it to projects where satin nickel cabinet hardware or trim is already specified, helping create a unified look at the lock locations across a run of units. Positioned as a trim bezel within the locks and latches category, it suits work where a defined metal ring around the cylinder is part of the design expectation.

Details That Support Consistent Lock Installations

This CompX Timberline Lock bezel lets cylinder bodies be used with 3/4 inch through 7/8 inch diameter holes, which helps maintain a single boring standard for multiple lock and panel combinations. Because the same bezel permits use of locks in 7/8 inch thick panels, installers can carry one trim solution for a range of panel thicknesses instead of splitting stock by thickness. The trim bezels classification signals that this part focuses on the visible perimeter of the lock, so it helps define the finished appearance once the cylinder body is positioned. With both broken and full box quantities offered and a discount available for full box orders, shops can treat this bezel as an everyday stock item, using broken quantities for repair work and full box quantities for repetitive cabinet or fixture runs.

Common Questions About The BZ-700 Trim Bezel

Selecting This Bezel For Lock Cylinder Projects

The BZ-700 Timberline bezel in satin nickel allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes and permits use of locks in 7/8 inch thick panels, so it aligns with common boring and panel practices. Sold in both broken and full box quantities with a discount available for full box orders, it suits both one-off lock service work and repeat production runs where using the same trim bezel simplifies stocking and installation planning.