BZ-400 Timberline Bezel, Statuary Bronze

BZ-400 Timberline Bezel For Lock Cylinders

BZ-400 Timberline bezel is a trim bezel from CompX Timberline Lock designed around cylinder bodies so the lock seats cleanly in the panel face. This bezel allows cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, so an existing bore in that range can accept the cylinder without re-boring every opening. The bezel is statuary bronze, giving the lock face a consistent bronze appearance that ties in with matching hardware on the job. As a trim bezel in the Locks and Latches, Lock Accessories category, it finishes the cylinder opening so the installation looks intentional instead of like a rough bored hole. The BZ-400 designation and manufacturer part number BZ-400 identify it clearly for reorder or matching to existing CompX Timberline lock setups across multiple cabinets.

Trim Bezel Details That Support Lock Work

• The BZ-400 Timberline bezel is described as a trim bezel, which frames the cylinder body and hole so the edge of the bore is covered and the finished install looks professional in cabinet and panel work.
• By allowing cylinder bodies to be used with 3/4 inch through 7/8 inch diameter holes, this bezel lets one range of lock cylinders service different bore sizes, which reduces extra drilling on mixed existing layouts.
• The bezel permits use of locks in 7/8 inch thick panels, so thicker fronts in cabinetry or panels can still accept the cylinder body where this bezel is specified, instead of restricting installs to thinner stock.
• The statuary bronze description gives the face a bronze tone that coordinates with other statuary bronze components, supporting consistent visual trim across banks of locks or matching bronze-themed projects.
• Placement in the Locks and Latches, Lock Accessories, Trim Bezels class signals that this part is intended to work around the cylinder body as finishing trim, helping installers organize parts by role during lock jobs.

Hole And Panel Fit For BZ-400 Timberline Bezel

The BZ-400 Timberline bezel is specified to allow cylinder bodies in 3/4 inch through 7/8 inch diameter holes, so bores within that window can be used without changing bit size between cabinet sections. This same bezel also permits use of locks in 7/8 inch thick panels, tying the panel thickness and hole size together so installers can standardize on that combination wherever a CompX Timberline cylinder body is planned. Because the component is defined as a trim bezel, it sits around the cylinder body at the panel face, which aligns the visible lock front consistently and hides slight variations at the bore edge.

Using This Statuary Bronze Trim Bezel In Work

Where The BZ-400 Bezel Fits In Lock Projects

The BZ-400 Timberline bezel from CompX Timberline Lock belongs in lock jobs where cylinder bodies must fit 3/4 inch through 7/8 inch diameter holes in panels. In these installations, the bezel frames the cylinder in the opening so the edge of the hole is covered, giving the Locks and Latches, Lock Accessories assembly a finished trim look. When cabinets or panels are built with 7/8 inch thick fronts, the bezel permits use of locks in those 7/8 inch thick panels, so the same CompX Timberline cylinder bodies can be applied to thicker faces without changing to a different lock family. Because the product is designated as a trim bezel, it functions as the visible surround at the front of drawers, doors, or panels where a keyed or similar cylinder body is installed.

Why BZ-400 Dimensions And Finish Matter On Site

The stated fit for 3/4 inch through 7/8 inch diameter holes means the BZ-400 Timberline bezel supports a controlled range of bore sizes, which simplifies layout when a project mixes materials but keeps those diameters. By also permitting locks in 7/8 inch thick panels, this same trim bezel gives installers one known setup that works on thicker faces, helping maintain consistent cylinder projection and face alignment across banks of doors or drawers. The statuary bronze description defines the visible finish, so lock faces and surrounding trim can be coordinated with other statuary bronze elements on the job, such as pulls or hinges in matching bronze tones. Identifying this part as BZ-400 and manufacturer part number BZ-400 helps shops align drawings, ordering, and assembly bins so the correct trim bezel is pulled whenever a CompX Timberline cylinder body is specified in that opening range.

Common Questions About BZ-400 Timberline Bezel Use

Select BZ-400 Timberline Bezel For Defined Fits

The BZ-400 Timberline bezel from CompX Timberline Lock gives cylinder bodies a defined fit in 3/4 inch through 7/8 inch diameter holes and supports locks in 7/8 inch thick panels. The statuary bronze trim bezel finish aligns the visible lock front with bronze-focused projects. With the manufacturer part number BZ-400 and placement in the Locks and Latches, Lock Accessories, Trim Bezels class, this part is straightforward to specify whenever that combination of bore range, panel thickness, and bronze appearance is required on cabinet or panel work.