Domi Cam Adjustable In-Line Mounting Plate, Nickel-Plated, with Pre-Mounted Euro-Screws, 2mm

Domi Cam Mounting Plate For Precise Hinges

Domi cam adjustable in-line mounting plate describes a hinge mounting plate designed to fine-tune the hinge position on the cabinet. As a hinge mounting plate in the Salice "Domi" slim style range, it provides a low-profile interface between hinge and cabinet, which matters when lining up multiple doors on modern casework. Being part of the hinge mounting plates class keeps it focused on mounting and adjustment, which is useful whenever doors need consistent reveals across a run.

The 2mm reference in the product name identifies the plate height, which sets the base position for the hinge arm and helps keep drilling patterns and reveals consistent from cabinet to cabinet. Its role as an in-line plate supports standard layouts where installers want predictable alignment without extra trial-and-error on every hinge location.

The manufacturer part number BAPGR29/16 ties this plate directly to Salice America documentation, which matters when matching existing hardware on service calls or ordering the same plate across multiple jobs.

Key Salice Mounting Plate Details For Cabinets

• Die-cast steel construction gives the mounting plate a solid body, which supports the hinge loads over time and helps maintain alignment when doors are used repeatedly on cabinet installations.
• Nickel plated, corrosion-resistant finish protects the die-cast steel, which matters in typical kitchen and shop environments where moisture and handling could otherwise mark the plate surface.
• Salice "Domi" slim style design keeps the plate profile compact, which is helpful inside cabinets where hinges and plates must clear interior storage and adjacent hardware.
• Height adjustment by eccentric cam of plus or minus 2 mm lets installers shift the door position vertically, which is valuable for tightening reveals and lining up door tops and bottoms on site.
• Depth adjustment by eccentric cam from 0.5 mm to +2.8 mm allows controlled in-and-out movement of the door, which supports clean fits against cabinet faces and reduces door rubbing.
• Cabinet side attachment by pre-mounted Euro screws speeds installation on cabinet sides drilled for Euro screws, which reduces setup time and keeps the plate accurately located in the system holes.

Mounting And Adjusting This Hinge Plate

The cabinet side attachment method using pre-mounted Euro screws means the plate is intended for cabinets drilled with Euro screw system holes, so installers can drive the screws directly into the prepared pattern and keep hinge positions consistent. The height adjustment by eccentric cam of plus or minus 2 mm lets the door move up or down after mounting, which is important when doors show a step at the top or bottom and need quick correction without redrilling.

The depth adjustment by eccentric cam from 0.5 mm to +2.8 mm gives a defined adjustment range, so the door can be brought closer to or slightly away from the cabinet front, which helps achieve an even gap and smooth swing when working with frameless cabinets using this Salice plate.

Using The Salice Domi Plate In Cabinet Runs

Where This Die-Cast Steel Plate Fits Best

The die-cast steel hinge mounting plate design suits cabinet installations where the plate must carry the hinge and door load at the cabinet side, so it fits well in frameless cabinet systems using Euro screw drilling. Its 2mm plate height sets a predictable offset between the cabinet side and hinge arm, which simplifies layout when running a series of cabinets that need matching door positions. The Salice "Domi" slim style profile works in interiors where space is tight near shelves or pull-outs, because the compact shape reduces interference inside the cabinet.

The nickel plated, corrosion-resistant finish allows the plate to sit inside kitchen or workshop cabinets without quickly showing surface rust, which helps keep the interior hardware looking consistent over time. Since this mounting plate is part of the hinge mounting plates category from Salice America, it integrates into hinge setups where a matching Salice Domi hinge arm is used, giving installers a coordinated hinge and plate system for new cabinets or hardware upgrades.

Why The Cam Adjustments Support Clean Results

The height adjustment by eccentric cam of plus or minus 2 mm gives a defined vertical tuning range, which lets installers align doors after hanging instead of relying entirely on initial drilling accuracy. This adjustment is especially useful on multi-door runs, where one or two doors may sit slightly high or low and need a small correction to match adjoining fronts.

The depth adjustment by eccentric cam from 0.5 mm to +2.8 mm works on the same principle for in-and-out positioning, allowing the door overlay and closing pressure against the cabinet front to be refined on each hinge point. By using these eccentric cams, installers can dial in gaps and overlay without loosening the basic mounting, which reduces rework during final fit-out.

The pre-mounted Euro screws on the cabinet side attachment further support repeatable results, because each plate locates in the Euro system holes before tightening, helping keep hinge centers in line from cabinet to cabinet. Together, the die-cast body, nickel plating, and cam adjustments create a mounting platform aimed at stable, easily adjustable door alignment in everyday cabinet use.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Cabinet Installations

This Salice hinge mounting plate combines a 2mm height, die-cast steel body, and nickel plated, corrosion-resistant finish with cam-based height and depth adjustments, giving cabinet builders and installers a defined way to align doors on Euro-drilled cabinet sides. When a project calls for a Salice "Domi" slim style hinge mounting plate with pre-mounted Euro screws and precise eccentric cam adjustments, this Domi cam adjustable in-line mounting plate offers a focused solution for setting and maintaining cabinet door position.