Domi Cam Adjustable In-Line Mounting Plate, Nickel-Plated, with Pre-Mounted Euro-Screws, 0mm

Domi Cam Adjustable Mounting Plate For Hinges

Domi cam adjustable in-line mounting plate describes a Salice America hinge mounting plate designed for controlled door positioning on cabinets. The plate is part of the Domi slim style family, so it works as a compact base for compatible Salice hinges where tight clearances and clean lines matter on modern casework. The plate is constructed of die-cast steel, giving the hinge connection a solid metal foundation that resists distortion during repeated door movement, which helps maintain consistent gaps over time. A 0mm mounting height positions the hinge arm close to the cabinet surface, which is useful when the design calls for standard overlay geometry without extra height build-up under the hinge arm. As a hinge mounting plate in the Hinges|Hinge Base Plates category, it provides the interface between cabinet side and hinge arm, turning adjustment at the cams into precise door alignment in daily use.

Key Mounting Plate Details For Cabinet Work

• Die-cast steel construction gives the mounting plate a rigid structure that supports hinge loads, which helps keep doors tracking on the same line after repeated openings.
• Nickel-plated, corrosion-resistant finish protects the steel from rust, which matters in kitchen and bath environments where humidity can be present around the cabinet.
• 0mm plate height sets the hinge arm directly at cabinet side level, which helps achieve standard overlay geometry when designing or repeating a known door layout.
• Height adjustment by eccentric cam of plus or minus 2 mm allows small vertical corrections, which lets an installer fine-tune reveals to line up doors across a run.
• Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm enables controlled in-and-out setting of the door, which is useful for getting the door face flush with adjacent fronts.
• Cabinet side attachment using pre-mounted Euro screws speeds up mounting on drilled cabinet sides, which reduces install time when setting multiple plates on a production job.

Mounting And Adjustment Details For Installers

The Salice America Domi cam adjustable in-line mounting plate is configured for cabinet side attachment with pre-mounted Euro screws, so it is ready to engage Euro-style system holes on the case side and lock the hinge position to that drilling pattern. Height adjustment by eccentric cam of plus or minus 2 mm lets the installer correct small drilling or hinge-position variations, keeping door tops level across adjoining units without re-drilling. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm gives a practical in-and-out range for setting the door face relative to the cabinet, which helps align fronts where the carcass may have minor dimensional variation. The 0mm height plate keeps the hinge arm at base level on the cabinet panel, so it supports standard hinge geometry where the design depends on the hinge cup and arm, not extra plate height, to define overlays.

How This Salice Hinge Plate Supports Projects

Using The 0mm Plate In Cabinet Installations

The Salice Domi cam adjustable in-line mounting plate with 0mm height works as a flat reference at the cabinet side, so the installer can rely on the hinge arm and drilling pattern to control overlay without compensating for extra plate thickness. Because cabinet side attachment is handled by pre-mounted Euro screws, the plate suits projects built around Euro-style system holes, letting the installer drive directly into the existing casework pattern for repeatable spacing. The die-cast steel body holds the hinge arm firmly against the cabinet side, so the door weight is transferred into a robust metal component rather than relying solely on the screws, which benefits tall or frequently used doors. In this role as a hinge base plate, it connects the cabinet structure to compatible Salice hinges, giving a stable platform for the hinge adjustments to do their work accurately.

Cam Adjustments That Improve Door Alignment

Height adjustment by eccentric cam of plus or minus 2 mm provides controlled vertical movement at the mounting plate, so small turns at the cam translate into precise shifts in door position without loosening the main fixing screws, which supports quick alignment during installation. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm allows the hinge arm to travel in and out relative to the cabinet, so the installer can bring doors into the same plane where carcasses are slightly out, avoiding time-consuming rework. Nickel-plated, corrosion-resistant steel keeps the cams and plate surfaces in good condition in typical cabinet environments, so adjustment remains smooth even after the hinges have been in service. As a hinge mounting plate from the Hinges|Hinge Base Plates category, these combined adjustments give control over gap, reveal, and flushness using only the built-in cams instead of structural modifications.

Common Questions About This Hinge Mounting Plate

Selecting This Plate For Salice Hinge Projects

The Salice America Domi cam adjustable in-line mounting plate, manufacturer part BAPGR09/16, pairs a 0mm height with die-cast steel strength, so it fits projects built on standard hinge geometry that still demand a solid base. Nickel-plated, corrosion-resistant construction supports long-term use in typical cabinet locations, while the eccentric cam adjustments in height and depth give installers the control they need to tune gaps and faces quickly. With cabinet side attachment handled by pre-mounted Euro screws, this hinge mounting plate aligns naturally with Euro-drilled cases, making it a practical choice when planning repeatable Salice hinge installations through Wurth Baer Supply.