Domi Cam Adjustable In-Line Mounting Plate, Nickel-Plated, with Pre-Mounted Euro-Screws, 6mm

Domi Cam Mounting Plate For Precise Hinge Setup

Domi cam adjustable in-line mounting plate describes a Salice America hinge mounting plate designed for precise cabinet hinge positioning. The slim style Domi hinge mounting plate works as the interface between the hinge arm and the cabinet side, so hinge alignment stays controlled at the plate. Its 6mm height defines the starting overlay geometry, which matters when matching hinge and door layout across a run of cabinets. Construction in die-cast steel gives the plate a rigid base under load, helping the hinge maintain stable door alignment through repeated use. Nickel-plated, corrosion-resistant finish protects the die-cast steel in typical cabinet environments, which supports consistent cam operation over time. The in-line mounting layout keeps the plate compact along the hinge line, useful where multiple hinges share limited stile space. As a hinge mounting plate, it forms part of a Salice system that supports repeatable installations.

Key Mounting Plate Details For Cabinet Work

• Die-cast steel construction creates a solid mounting base for the hinge, which helps doors stay aligned as they open and close in everyday cabinet use.
• Nickel-plated, corrosion-resistant finish shields the plate from moisture and normal cabinet humidity, supporting long-term hinge adjustments without surface deterioration.
• Height adjustment by eccentric cam plus or minus 2 mm lets installers fine-tune door reveal at the plate, reducing time spent shifting doors to correct misalignment.
• Depth adjustment by eccentric cam of 0.5 mm to plus 2.8 mm provides controlled in-out positioning of the door, which helps match overlays and clear adjacent fronts.
• Pre-mounted Euro screws on the cabinet side attachment allow direct engagement into Euro system holes, streamlining installation steps on line-bored cabinet sides.
• The 6mm mounting plate height defines a consistent reference level for door overlay planning, which supports uniform reveals across multiple doors in a project.

Mounting And Adjustment For Cabinet Hinge Alignment

This Salice America hinge mounting plate uses cabinet side attachment by pre-mounted Euro screws, so it fastens directly into Euro-style system holes on the case side. Height adjustment by eccentric cam plus or minus 2 mm at the plate provides vertical tuning, allowing installers to shift the door position without altering casework. Depth adjustment by eccentric cam of 0.5 mm to plus 2.8 mm handles the in-out setting, so the door face can be aligned with adjacent doors or fronts. By combining these cam adjustments on the plate, hinge setup occurs at a predictable reference point, simplifying repeat installations on multi-door cabinets. The 6mm plate height becomes part of the hinge geometry, supporting layouts where overlay and reveal dimensions must repeat from cabinet to cabinet.

Using This Salice Plate In Cabinet Projects

Where This Domi Slim Hinge Plate Fits Best

Salice "Domi" slim style hinge mounting plates fit projects using the Domi slim style hinge family, giving cabinet sides a matching interface plate. The in-line plate format suits hinge runs where space along the stile is limited, because the narrow layout fits between adjacent hardware and edges. With cabinet side attachment handled by pre-mounted Euro screws, this plate integrates into cabinets drilled with Euro system holes, supporting frameless and other line-bored designs. The 6mm height positions the hinge arm at a defined offset from the cabinet side, so designers can plan overlay and reveal around that dimension when specifying Domi hinges. In applications where consistent alignment across many doors is required, such as banks of wall or base cabinets, using the same 6mm Salice mounting plate helps maintain uniformity.

Why Cam Adjustments And Materials Support Results

The die-cast steel body provides the structural core for this hinge mounting plate, so hinge forces transfer through a rigid casting instead of flexing material. That rigidity supports accurate function of the eccentric cams, because the plate holds its shape while height and depth are adjusted. Height adjustment by eccentric cam plus or minus 2 mm lets installers dial in door gaps at the plate rather than modifying door edges or drilling new positions. Depth adjustment by eccentric cam of 0.5 mm to plus 2.8 mm offers a defined range for controlling how far the door projects, which matters when aligning door faces in a run or clearing pulls and adjacent panels. The nickel-plated, corrosion-resistant finish helps protect both the plate surface and the cam components in typical cabinet environments, so adjustments stay smooth even after the cabinet has been in service. Cabinet side attachment by pre-mounted Euro screws provides a positive connection into Euro-style system holes, giving the cams a stable anchor point for reliable adjustment. Together, these details support repeatable hinge setups on production jobs and detailed custom work using the BAPGR69/16 mounting plate.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Projects

The Salice America Domi cam adjustable in-line mounting plate with 6mm height, die-cast steel body, and nickel-plated, corrosion-resistant finish offers a defined base for Domi slim style hinges. With height adjustment by eccentric cam plus or minus 2 mm and depth adjustment by eccentric cam of 0.5 mm to plus 2.8 mm, the plate supplies the fine-tuning needed to align doors across cabinet runs. Cabinet side attachment by pre-mounted Euro screws ties directly into Euro-style system holes, helping this BAPGR69/16 hinge mounting plate integrate smoothly into frameless and line-bored cabinet construction.