Domi Cam Adjustable In-Line Mounting Plate, Nickel-Plated, with Pre-Mounted Euro-Screws, 3mm

Domi Cam Adjustable Mounting Plate For Hinges

Domi cam adjustable in-line mounting plate is a Salice America hinge mounting plate designed to give precise alignment on cabinet doors using a slim style die-cast steel body. The 3mm plate height establishes a consistent reference line between the hinge and cabinet, which supports repeatable layouts across multiple doors in a run. Nickel-plated steel construction provides a corrosion-resistant surface, which helps maintain smooth adjustment and a clean appearance in typical cabinet environments. The die-cast build provides a solid base for the hinge arm, which is important when doors are opened and closed repeatedly in everyday use. As part of the Salice "Domi" slim style range, this plate fits installations where a lower profile plate is preferred to maintain more interior clearance near shelves or stored items. This part is classified under hinge mounting plates, so it fits into standard cabinet hardware planning.

Key Mounting Plate Details For Cabinet Work

• Die-cast steel construction provides a rigid base under the hinge arm, which helps the hinge maintain alignment under repeated loading and normal door use.
• Nickel-plated, corrosion-resistant finish protects the steel surface, which matters anywhere the plate may face humidity or long-term exposure inside kitchen or bath cabinets.
• 3mm plate height defines the hinge-to-cabinet spacing, which supports predictable overlay and reveals when matching door positions across several cabinets.
• Height adjustment by eccentric cam of plus or minus 2 mm allows fine vertical tuning of the door position, which helps bring door tops and bottoms into a straight visual line.
• Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm lets you move the door in or out relative to the cabinet face, which is useful to flush doors with adjacent fronts.
• Cabinet side attachment with pre-mounted Euro screws speeds installation, because the plate is ready to drive into system holes without separate screw handling on site.

Mounting And Adjustment Details For Installers

This Salice America hinge mounting plate uses pre-mounted Euro screws on the cabinet side, which suits Euro system drilling patterns where installers drive the plate directly into prepared holes. The 3mm plate height sets the base thickness under the hinge arm, so hinge selection and boring patterns can be planned around that fixed offset. Height adjustment by eccentric cam of plus or minus 2 mm gives a controlled way to bring multiple doors into line after the hinges are fastened, instead of relocating plates. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm provides in-and-out door positioning on the cabinet, which helps align fronts where face planes differ slightly due to material or construction. Nickel-plated, corrosion-resistant finish supports these adjustments staying usable over time in normal cabinet environments.

Using This Salice Mounting Plate In Projects

Where This Slim Style Hinge Plate Fits Best

The Salice "Domi" slim style hinge mounting plate is designed for cabinet applications where a low-profile plate is preferred, so it works well in situations where interior space near the hinge area is important. Its 3mm plate height defines a moderate stand-off between hinge arm and cabinet side, which supports many common European cabinet layouts without extreme offsets. Because the cabinet side attachment method uses pre-mounted Euro screws, this plate integrates smoothly into cabinets drilled for Euro system hardware. That connection style helps keep alignment repeatable between cabinets built with the same boring pattern. The nickel-plated, corrosion-resistant finish suits typical residential or commercial cabinet interiors, where metal parts benefit from surface protection against humidity and handling. As a hinge mounting plate from Salice America, it serves as the base layer underneath compatible hinge arms in the door hardware stack.

Why The Cam Adjustments Support Clean Results

The eccentric cam design for height adjustment, rated at plus or minus 2 mm, means an installer can dial the door up or down after fastening, which reduces the need to re-drill or shift mounting positions. This is especially useful on multi-door runs where a small variance shows across several fronts, because the cam can bring everything into visual alignment. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm gives practical in-and-out control, so doors can be brought flush with neighboring cabinets or appliances even when carcass dimensions vary slightly. Both adjustments are built into the same die-cast steel body, so each plate serves as a combined mounting and fine-tuning point. The corrosion-resistant nickel plating supports these cams operating smoothly over time, helping adjustments remain usable when projects require later tuning or service. Together, these features give a controlled way to correct reveals without rebuilding the cabinet.

Common Questions About This Salice Hinge Plate

Choose This Plate For Cam-Adjusted Cabinet Hinges

The Domi cam adjustable in-line mounting plate from Salice America combines a 3mm plate height, die-cast steel body, nickel-plated corrosion-resistant finish, and both height and depth eccentric cam adjustments. For cabinet projects built around Euro system hardware, these details offer a precise way to set and fine-tune door position directly at the mounting plate. Selecting this hinge mounting plate supports a workflow where drilling patterns, overlay targets, and final reveals are planned around a known 3mm reference and cam-based adjustment range.