Knape And Vogt 8417 Drawer Slides For Full Access

Knape and Vogt 8417 drawer slides deliver a 14 inch full extension action, so drawers travel their full length and expose stored contents for easier access during daily use and service work. The side mount design positions the slides on the drawer sides, supporting straightforward layout in typical cabinet construction. A self closing slide feature draws the slide to the closed position, which pulls the drawer shut over the last part of travel for a clean, consistent close in repeated openings. The slides are unhanded, so the same member works on either side, simplifying planning and reducing part variation on the job. A zinc finish presents a familiar, trade-standard appearance suited to many cabinet interiors. The 8417P 14 designation identifies this model and length, helping match replacements to existing Knape and Vogt installations when upgrading or repairing drawer boxes.

Key 8417P 14 Details That Support Your Build

• The 14 inch full extension design moves the drawer its full nominal length, allowing the back of the drawer to clear the cabinet face and improving reach to stored items and hardware during installation or adjustment.
• The self closing feature that draws the slide to the closed position helps pull drawers fully shut, which promotes a consistent front alignment and can reduce partially open drawers in regular use situations.
• The side mount configuration sets the slides along the sides of the drawer, aligning with common cabinet layouts where horizontal clearances are easier to manage than complex under-mount geometries.
• The unhanded construction allows each 8417 slide member to work on either side of the drawer, simplifying stocking and reducing orientation errors when setting up multiple drawer boxes on a production bench.
• The zinc finish on the slides provides a neutral metallic look that works with many interior cabinet styles and offers a familiar surface feel when adjusting or servicing the hardware.

Mounting And Clearance Details For 8417P 14 Slides

The 8417P 14 slide uses side clearance of 1/2 inch plus 1/32 inch, minus 0 inch on each side, which defines the working gap between the drawer side and cabinet side for this model. This consistent clearance value guides drawer box sizing so the ball bearing members can run freely without binding. The slide height of 1-13/16 inch sets the vertical profile, influencing where builders position slide rows on drawer sides to maintain adequate clearance from the drawer bottom and top rails. A 32mm pattern is present, which aligns hole placement with the widely used 32mm system, aiding layout in system-drilled cabinet cases. Recommended fasteners are #7 x 5/8 inch Phillips pan head, tying the installation to a specific screw size and head style that suits the slide holes and material thickness typically used in cabinet drawers.

Using KV 8417 Self Closing Slides In Cabinet Projects

Where These Zinc Side Mount Slides Fit Best

The 8417 Series self closing side mount design suits cabinet installations where a 14 inch drawer depth aligns with case dimensions, helping builders maximize usable drawer travel in that footprint. Side mount ball bearing construction supports drawers that ride on the cabinet sides, making these slides appropriate where side panels provide the primary structural support. The specified side clearance of 1/2 inch plus 1/32 inch, minus 0 inch on each side guides builders toward drawer boxes that work predictably with typical case openings, supporting repeatable fitting in runs of similar cabinets. A slide height of 1-13/16 inch shapes how these slides nest against drawer sides, giving installers a consistent vertical envelope when coordinating with drawer bottoms, dividers, or nearby hardware. The 32mm pattern supports cabinets drilled on that system, connecting the slides to casework built around line boring equipment.

Details That Support Repeatable Slide Installation

The Knape and Vogt 8417 drawer slides use a full extension action, so once the side clearance and height references are followed, installers gain a predictable travel path on every unit. The self closing feature that draws the slide to the closed position gives drawers a consistent closing pull, which can reduce alignment drift of faces in banks of cabinets. Unhanded slide members reduce orientation decisions at the bench, which helps maintain consistent installation steps across multiple cabinets while using a single model number. The recommended #7 x 5/8 inch Phillips pan head fasteners connect the slide firmly to typical drawer materials without spanning too deeply, supporting secure mounting while respecting common side thicknesses. The 32mm pattern in the slide body aligns with system holes in case sides, which simplifies positioning, speeds up layout, and supports accurate replication in production or multi-unit work.

Common Questions About 8417P 14 Slide Use

Selecting The Right 8417P 14 Slides For Your Drawers

The Knape and Vogt 8417P 14 full extension side mount slides combine 14 inch travel, a self closing feature, and a 32mm pattern, aligning with cabinet projects built around system drilling and standard drawer depths. The defined side clearance of 1/2 inch plus 1/32 inch, minus 0 inch on each side and height of 1-13/16 inch help you size drawer boxes and lay out mounting positions with confidence. With unhanded construction and recommended #7 x 5/8 inch Phillips pan head fasteners, these ball bearing slides support straightforward installation when specifying hardware for new cabinetry or updating existing drawers.