KV8417 16" Full Extension Hold-In Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8417P 16

Knape And Vogt 16 Inch Drawer Slides For Full Access

Knape and Vogt 16 inch drawer slides in the 8417 Series are side mount ball bearing slides that provide full extension, so drawers travel their full length for clear access to stored items during daily use or service work. The self closing feature on this KV Model #8417 slide draws the drawer to the closed position, which helps keep drawers consistently shut once pushed past the self close point. The unhanded side mount design means each slide works on either side of the drawer, simplifying layout and reducing part variation on multi-drawer jobs. A zinc finish on these slides supports a clean, uniform look inside cabinets where metal hardware remains visible when drawers are open.

Key 8417P 16 Drawer Slide Details For Projects

• The full extension design on this 16 inch ball bearing slide lets the drawer open to its full nominal length, which helps installers deliver full visibility into the drawer space and easier reach to items at the back.
• The self closing slide feature that draws the slide to the closed position reduces the tendency for drawers to remain partially open, which supports neater cabinet lines and helps maintain consistent front alignment across a run.
• The unhanded side mount configuration allows the same 8417P 16 slide model to be installed on either side of the drawer, which simplifies stocking and reduces the chance of left/right mix-ups during installation or replacement work.
• The 32mm pattern on this slide aligns with a common cabinet system layout, so hole spacing relates predictably to standard system boring patterns and helps speed repeatable slide positioning on production or retrofit jobs.
• The zinc finish on this Knape and Vogt slide offers a neutral metal appearance, which works well in many cabinet interiors where exposed slide members need to look consistent from drawer to drawer.

Installation Dimensions And Side Mount Fit

The recommended side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines the target gap between drawer and cabinet, giving installers a clear range for sizing drawer widths so the ball bearing slide members run smoothly. With a slide height of 1-13/16 inches, the 8417 Series profile provides a known vertical dimension to plan drawer box height and screw placement in relation to the drawer bottom and cabinet opening. The 32mm pattern ties the slide mounting holes to a familiar system spacing, which supports using existing line boring equipment or jigs for repeatable mounting. Using the recommended #7 x 5/8 inch Phillips pan head fasteners matches the hole sizing in the slide members, helping each screw seat properly and support the drawer slide tracks.

Using KV 8417 Full Extension Slides In Cabinet Work

Where This 16 Inch Ball Bearing Slide Fits

The Knape and Vogt 8417P 16 side mount drawer slide fits applications needing a 16 inch nominal drawer travel with full extension, where users benefit from pulling the drawer fully forward to expose the interior. The specified 1/2 inch plus 1/32 inch minus 0 inch side clearance each side suits cabinet cases and drawer boxes built to this gap, giving the ball bearing motion space to run without binding along the slide length. The unhanded construction means one slide pattern serves both left and right sides of the drawer, which is useful for cabinet runs with multiple identical openings that share a single slide specification. The 1-13/16 inch height gives the slide enough profile to tie into common drawer side heights while staying within typical residential and commercial cabinet clearances.

Details That Support Repeatable Drawer Performance

The self closing slide action that draws the slide to a closed position helps establish a consistent end point for drawer travel, which supports even front alignment on cabinet banks once the fronts are set. The 32mm pattern allows installers using system boring to place mounting holes that line up with slide slots, which can reduce layout time and help maintain consistent reveal spacing from cabinet to cabinet. The zinc finish on the 8417 Series creates a uniform metal surface along all visible slide members, which supports a professional appearance whenever drawers are opened during use or inspection. The specified #7 x 5/8 inch Phillips pan head fasteners pair with the slide hole geometry, which aids in achieving a secure mechanical connection that resists loosening under repeated drawer cycles. Together, these details support drawer motion that tracks as expected over time.

Common Questions About 8417P 16 Drawer Slides

Selecting This KV 8417 Slide For Your Project

The KV 8417 full extension drawer slides in the 16 inch 8417P 16 model combine side mount ball bearing action, a self closing feature, and a defined 1/2 inch plus 1/32 inch minus 0 inch side clearance that supports precise drawer sizing. The 1-13/16 inch slide height and 32mm pattern offer predictable dimensions for cabinet and drawer construction. For projects calling for a zinc finish side mount slide with full extension travel, this Knape and Vogt 8417P 16 option from Wurth Baer Supply provides a clearly specified choice for consistent drawer performance.