Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Rapido hinge is built for cabinet boxes set at a positive 45 degree angle, hanging overlay doors on face-frame or frameless constructions with a self-close spring and an expanding dowel mount.
Bay cabinets, diagonal corner units, and angled accent pieces all share one requirement: the hinge has to match the cabinet's angle, not fight it. This hinge is engineered at a positive 45 degree cabinet angle, so the door swings clear of the angled box face without binding or misalignment. The 35mm cup bores into the door in the same way as any standard concealed hinge, and the arm connects to a Salice base plate mounted to the cabinet, ordered separately. The 94 degree opening is the appropriate swing for this geometry, letting the door open fully without colliding with an adjacent panel. On a straight cabinet that would read as restricted; on a 45 degree angled box it is the angle the application calls for.
The hinge body is plated steel in a nickel finish. The expanding dowel mount presses the base plate into pre-bored holes for a firm mechanical connection that suits high-volume production lines and custom shops alike. Once the plate is set, Salice's Rapido toolless engagement clips the hinge arm to the plate without a screwdriver, and the built-in height and side adjustment lets you bring paired doors to a matched reveal with a few turns of the cam screws.
Cabinet shops building angled kitchen layouts, designers specifying diagonal corner storage, and contractors fitting bay-front cabinetry all run into this application. It suits both frameless European boxes and face-frame cabinets, so it works across the range of construction styles a shop handles. Because plates are Salice-specific, pair this hinge with the matching Salice base plate for the cabinet construction and overlay position you need. For a quieter, damped close on the same angled geometry, the Silentia+ soft-close version of this series is the alternative to specify.
The arm geometry is built to a positive 45 degree cabinet angle. On a straight 90 degree cabinet it will not align correctly. It is the right pick specifically for angled and bay cabinet boxes.
Yes. On an angled bay, the effective clearance combines the cabinet angle and the door swing, so 94 degrees gives good access. The opening angle is sized to the application, not a shortcoming.
The mount presses into pre-bored holes in the cabinet side. Confirm the hole size and spacing with the Salice base plate spec before boring the cabinet.
Yes. The hinge arm connects to a Salice base plate that mounts to the cabinet, and the plate is sold separately. Plates are Salice-specific; a plate from another brand will not connect to this hinge.
When the box is set at 45 degrees, specify a hinge built for it: this Salice Series 200 Rapido delivers the geometry, the self-close spring, and the expanding dowel mount the job needs.
Sold In: 1 Each