Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Silentia hinge is built for cabinet doors mounted at a positive 45-degree cabinet angle, the geometry found on bay fronts, angled corner units, and diagonal face cabinet configurations. It delivers soft-close damping on both frameless and face-frame boxes and installs through dowel mounting into the 35mm cup bore.
A standard concealed hinge is built for a 90-degree cabinet front. When the cabinet face is set at a 45-degree outward angle, the arm geometry has to compensate or the door will not sit, swing, or close correctly. This hinge carries the +45 degree angle built into the arm, so the door aligns to the angled face and swings clear without binding. The 94-degree opening is the functional swing for this geometry: the door travels as far as the angled box allows before it would contact an adjacent surface, making the angle a fit, not a shortcoming.
The 35mm cup bores into the back of the door at the standard depth. The arm connects to a Salice base plate mounted to the cabinet, which is ordered separately. Plates are Salice-specific; plates from other brands will not connect to this hinge.
The dowel mount means the cup side of the install is entirely screw-free: pre-attached dowels press into the bored dowel holes in the door, the preferred method in CNC-driven shops where consistent boring is already in the workflow. On the cabinet side, the arm connects to the Salice base plate. Silentia soft-close is integrated into the hinge body, so no separate add-on damper is needed. The result is a door that moves quietly and settles without slamming, day after day, on a cabinet face that most standard hinges cannot serve.
Cabinet shops producing angled or diagonal corner units, designers specifying bay-front kitchen runs, and contractors installing pre-built angled cabinets on site all need a hinge that handles the geometry rather than fighting it. This hinge fits that job on either frameless or face-frame construction. The nickel finish coordinates with other Salice hardware in the same Series 200 range. For standard 90-degree cabinet fronts, a straight-arm Salice Series 200 hinge in the appropriate overlay is the right pick instead.
It refers to the angle of the cabinet face, not the door's opening swing. A +45 degree cabinet has its front panel set at a 45-degree outward angle, common on bay fronts and diagonal corner units. This hinge's arm geometry is built for that face angle.
The 94-degree opening is correct for an angled bay cabinet. The door's travel arc on a 45-degree face is naturally constrained by the adjacent cabinet surfaces, so the hinge is engineered to match that clearance. It is the right angle for the application.
Yes. The hinge arm clips to a Salice base plate that mounts to the cabinet. The plate is sold separately. Use a Salice plate matched to your cabinet construction, as plates are brand-specific and will not interchange with other brands.
No. Silentia soft-close uses an integrated damper to slow the door over the last few degrees so it closes quietly. A self-close spring pulls the door shut but does not cushion the contact. This hinge has the damped soft-close, not a spring pull.
Specify this hinge when the project calls for doors on outward-angled cabinet faces that need to close quietly and sit true, with the arm geometry already matched to the 45-degree cabinet front.
Sold In: 150 Each