Salice 200 Series Self-Close Overlay 45° Angle Face-Frame;Frameless Hinges Nickel, 94° Dowel - C2RBM99AC

Salice 200 Series Self Close Hinge For Angled Cabinets

Salice 200 Series self close hinge is a concealed cabinet hinge designed for both residential and commercial cabinets, giving you one hinge line that works across multiple job types. This hinge is an overlay 45 degree angle face-frame and frameless hinge, so it supports angled cabinet layouts where standard straight hinges do not fit the door geometry. The hinge uses a dowel fastening cup, letting you work with press-in style construction when the door is drilled for dowels. All steel construction that is nickel plated provides corrosion resistance, which supports long-term performance in typical kitchen and bath environments. The hinge is permanently self lubricating using environmentally safe lubricants, so the closing action stays smooth over time without separate lubrication steps. The hinge is available in self-closing only, so the door is pulled shut at the end of travel for consistent closing.

Key Salice Angle Hinge Details For Cabinet Work

• Design for both residential and commercial cabinets means one hinge specification can be used across different project types, helping standardize hardware on mixed-use jobs.
• All steel hinge with nickel plated finish resists corrosion, so the hinge construction supports cabinet use in typical moisture and vapor conditions found in kitchens and baths.
• Permanently self lubricating operation using environmentally safe lubricants keeps the hinge movement smooth, which reduces hinge noise and helps maintain consistent door alignment.
• Blind corner hinge cup depth of only 11 mm works with most cabinet door profiles, which supports routing and profiling choices without over-cutting the back of the door.
• Hinge cup edge drilling distance of 3 mm to 6 mm provides a usable drilling range, which helps align overlay and reveal when working with varying door designs.
• Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw lets you shift the door position, which helps fine-tune gaps and reveals after hanging.

Installation And Adjustment Details For This Hinge

This Salice angled cabinet hinge uses a dowel fastening cup, so it is suited to press-in drilling patterns where dowels secure the cup in the door. The blind corner hinge cup depth of 11 mm affects boring depth, allowing a shallow bore that helps preserve material on thinner panel constructions. The specified hinge cup edge drilling distance of 3 mm to 6 mm defines the setback, which directly influences overlay and how the door sits on the cabinet. Patented parallel side-to-side adjustment from plus 4.5 mm to minus 1.5 mm through the hinge arm screw allows lateral movement of the door, which supports tightening or opening reveals without re-drilling. The hinge is designed to work with all Salice mounting plates, so you can match the hinge with different plate heights and configurations while staying within the same system.

Using This Salice Blind Corner Hinge In Cabinet Projects

Where This Angled Salice Hinge Is Applied

This Salice blind corner hinge is specified for overlay 45 degree angle face-frame and frameless cabinets, so it addresses angled corner applications where the door meets the cabinet at 45 degrees. The hinge is compatible with both residential and commercial cabinets, allowing use in kitchens, offices, and similar casework that needs concealed hardware. Because the hinge exceeds ANSI/BHMA Grade 2 standards, it is suited for situations where a tested performance level is required for specification, such as commercial installations. The hinge meets ISO9001 and ISO14001 environmental certifications, so it aligns with projects that call for products manufactured under documented quality and environmental management systems.

How Hinge Details Support Alignment And Workflow

The blind corner hinge cup depth of only 11 mm works with most cabinet door profiles, so fabricators can choose decorative profiles on the front without cutting too deeply into the back of the door. The hinge cup drilling distance of 3 mm to 6 mm gives flexibility in boring location, which helps installers adjust overlay and visually align doors across a run. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw allows the door to be shifted laterally while staying parallel to the cabinet edge, helping reduce rework when gaps are uneven. The hinge is designed to work with all Salice mounting plates, which means one hinge model can be paired with different plates to handle various overlays and construction details while staying in the same Salice system. Compatibility with Smove soft-close devices lets you add a soft-close function to the hinge system when project requirements call for controlled closing.

Common Questions About The Salice C2RBM99AC Hinge

Selecting This Salice Hinge For Angled Door Jobs

The Salice 200 Series self close hinge combines a 45 degree angled overlay design with a concealed long arm format, which suits blind corner cabinet doors that need clean front faces. All steel, nickel plated construction provides corrosion resistance, supporting long-term cabinet use. The 11 mm cup depth and 3 mm to 6 mm edge drilling distance define predictable boring details, simplifying door preparation. Parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw supports fine-tuning reveals after doors are hung. For projects calling for a concealed angled hinge that exceeds ANSI/BHMA Grade 2 standards and works with Salice mounting plates and Smove soft-close devices, this model offers a consistent specification point.