Series 200 Slide-On Mounting Plates with Traditional Assembly Screw-On, +/- 2 mm, 3mm Height

Salice Series 200 Mounting Plate For Hinges

Salice Series 200 mounting plate is a stainless steel nickel plated hinge mounting plate designed for use with Salice hinge systems, giving cabinet builders a consistent interface between door hinge and cabinet. This hinge mounting plate is constructed of stainless steel nickel plated, corrosion resistant, so it supports hinge performance in typical kitchen or shop environments where moisture and handling are common. The plate has a 3mm height, establishing the baseline door overlay and gap relationship that installers expect when working within Salice specifications. As a hinge mounting plate in the hinge base plates category, it provides the fixed reference point needed for accurate hinge positioning on cabinet sides or frames. The traditional assembly screw-on design lets installers fasten the plate using screws through the plate, supporting straightforward mounting on standard cabinet materials. Together, these verified details define a dependable mounting platform for Salice hinge installations.

Key Mounting Plate Details For Cabinet Work

• All mounting plates are compatible with any Salice hinge series, so a single plate family can serve multiple Salice hinge types in a shop, simplifying layout when projects combine different Salice hinges.
• The hinge affixes to the plate by sliding the hinge onto the plate and then tightening the pre-mounted screw on the plate, creating a slide-on connection that speeds door hanging and adjustments on repetitive cabinet runs.
• Height adjustment of +/- 2 mm is provided by slotted holes, allowing fine tuning of door reveal vertically without relocating holes, which helps installers correct minor drilling or carcass variances.
• Standard 37 mm x 32 mm positioning is built into the plate, aligning with common drilling patterns so jigs and line-boring setups match the plate layout across cabinet boxes.
• The plate is constructed of stainless steel nickel plated, corrosion resistant, giving the hinge interface resistance to corrosion that supports long-term motion and appearance in typical cabinet service conditions.

Slide-On Screw-On Mounting For Precise Fit

This Series 200 slide-on mounting plate uses a traditional assembly screw-on method, so the plate fastens with screws through the body into the cabinet side, giving a rigid base that holds hinge alignment under door load. The hinge then slides onto the plate and is secured by tightening the pre-mounted screw on the plate, letting installers set hinges quickly while still locking the hinge to the mounting plate for stable operation. Height adjustment of +/- 2 mm through slotted holes means the plate position can be shifted slightly up or down relative to the screw locations, helping fine tune door gaps without changing drilling patterns. With a defined 3mm height, the mounting plate sets a predictable offset from the cabinet surface to the hinge cup axis, which simplifies planning overlay and reveal across doors in a project.

How This Hinge Mounting Plate Supports Projects

Where This Salice Mounting Plate Is Used

This hinge mounting plate belongs to the hinge base plates product class, so it is intended as the interface mounted to the cabinet that accepts Salice hinges. Because all mounting plates are compatible with any Salice hinge series, the same base plate type can be applied across various Salice hinge models in a shop, allowing common drilling patterns when casework mixes different Salice hinge functions. The standard 37 mm x 32 mm positioning gives a known reference for line boring or jig-based drilling on cabinet sides, supporting production environments where repeatable hole spacing is critical. With a 3mm height, the plate suits layouts built around that offset, helping maintain consistent door positioning from cabinet to cabinet. The corrosion resistant stainless steel nickel plated construction suits cabinets in kitchens, baths, or workspaces where humidity and handling are present.

Details That Help Achieve Repeatable Hinge Results

The hinge affixes to this Series 200 slide-on mounting plate by sliding onto the plate and tightening the pre-mounted screw on the plate, which reduces handling steps during installation and keeps the hinge locked to a known reference surface once tightened. Height adjustment of +/- 2 mm through slotted holes lets installers shift the plate slightly after screws are set, so vertical reveals can be tuned while maintaining the original drilling pattern, improving consistency across a run of doors. The traditional assembly screw-on design relies on screw-driven clamping, so the contact between plate and cabinet side is direct, supporting stable alignment under repeated door use. The standard 37 mm x 32 mm positioning ties directly into common casework drilling schemes, allowing this Salice America plate, with manufacturer part number B2V3H39/15 and SAP description STL MTG PLT, SCREW-IN, 3MM, to drop into existing production workflows built around Salice layouts.

Common Questions About This Salice Mounting Plate

Selecting This Mounting Plate For Salice Hinges

This Salice hinge mounting plate combines Series 200 slide-on connection, traditional assembly screw-on fixing, and a 3mm height to support consistent door alignment across Salice-based cabinets. The stainless steel nickel plated, corrosion resistant construction and standard 37 mm x 32 mm positioning align with Salice drilling practices, giving installers a defined reference point for hinge placement. When a project is built around Salice hinge series and needs +/- 2 mm height adjustment through slotted holes, this Wurth Baer Supply offering provides a purpose-built mounting plate for that workflow.