Drawer Side Material, 1/2" Groove, 1/2" Thick, 3" x 96", Maple
Description
Drawer Side Material Maple For Consistent Builds
drawer side material maple gives cabinet shops and serious woodworkers a ready-to-assemble side blank that ties directly into modern drawer construction. This Genesis drawer side material is built as a drawer side blank, so it becomes the main structural member in the drawer box. The Genesis high quality drawer blank systems are available veneer plywood, which creates a stable substrate for repeatable machining and assembly. All wood blanks are pre-finished with Endura ultra violet cured top coat, so the surface is ready for installation without separate finishing steps. The 3 inch x 96 inch size provides continuous stock for multiple shallow drawers or tall sides in one run. With 1/2 inch thickness, the blank delivers a solid side profile suited to typical cabinet drawer applications while keeping material handling straightforward in the shop.
Key Drawer Blank Details That Speed Workflow
- The drawer side material is 3 inches high and 96 inches long, so a single length can be cut down into multiple drawer sides, which supports efficient layout and minimizes joint breaks along the run.
- The 1/2 inch thick design gives each drawer side a substantial profile, which supports typical joinery methods while keeping weight reasonable for handling and installation in cabinetry.
- All drawer blanks are pre-finished with Endura ultra violet cured top coat, which provides a ready-to-use surface so drawer interiors and sides move straight from cutting to assembly without separate finishing passes.
- All drawer blanks have a 1/4 inch drawer bottom dado, which establishes a consistent groove for the drawer bottom panel and helps maintain uniform alignment from drawer to drawer.
- The 1/2 inch bottom reveal is designed for undermount slides, which positions the drawer bottom correctly relative to the hardware and supports smooth integration with compatible slide systems.
- Blank lengths are 8 feet, which gives a long, uninterrupted piece of stock that helps maintain grain continuity and reduces the number of joints in larger projects.
Installation-Oriented Drawer Side Geometry And Fit
This Genesis drawer side blank has a 1/2 inch groove that works hand in hand with its 1/2 inch thick construction, so the geometry of the side wall and groove relate predictably during fabrication. All drawer blanks have a 1/4 inch drawer bottom dado, which lets the bottom panel register into the same location on every drawer for consistent fit across a job. The 1/2 inch bottom reveal is designed for undermount slides, aligning the drawer bottom height with the requirements of those slide systems. Blanks have a square edge profile, so edges present a straight reference for cutting, squaring, and assembly, which is useful when aligning fronts and backs.
Using Genesis Drawer Side Blanks In Cabinet Work
Where These Genesis Drawer Side Blanks Fit Best
The product is classified as drawer side blanks within drawer construction systems, so it is intended to function as the primary side component in a drawer box assembly. The maple drawer side material in 3 inch x 96 inch dimensions suits applications where a consistent, modest drawer height is common, such as many cabinet and furniture drawers. Genesis high quality drawer blank systems being available veneer plywood means the core is engineered for drawer work rather than general sheet use, supporting applications focused on drawer interiors and sides. All wood blanks are pre-finished with Endura ultra violet cured top coat, so they are oriented toward visible or touch surfaces inside cabinetry where a finished appearance and feel matter.
Details That Support Repeatable Drawer Construction Results
The 1/2 inch thick design works together with the 1/4 inch drawer bottom dado to create a predictable relationship between side thickness and bottom placement, which helps maintain squareness and uniform interior depth from drawer to drawer. The 1/2 inch bottom reveal designed for undermount slides keeps the drawer bottom at a fixed offset from the lower edge, which aids in aligning the drawer with undermount mechanisms that depend on that reveal dimension. Blank lengths are 8 feet, offering enough length to cut several matching sides from one piece, so related drawers share the same material run and appearance. Blanks have a square edge profile, which simplifies layout lines and machining operations that reference off the edge, supporting precise joinery and clean alignment at the front and back of the drawer box.
Common Questions About Genesis Maple Drawer Sides
What material are these Genesis drawer side blanks made from?
The Genesis drawer side material uses veneer plywood in maple, giving a stable engineered core with a maple appearance that supports consistent drawer side performance.
How does the 1/4 inch drawer bottom dado help in building drawers?
The 1/4 inch drawer bottom dado provides a consistent groove depth and width, so drawer bottoms seat uniformly and help keep every drawer square and repeatable.
What is the benefit of the 1/2 inch bottom reveal for undermount slides?
The 1/2 inch bottom reveal designed for undermount slides positions the drawer bottom at a fixed offset, which supports alignment with undermount slide hardware geometry.
How do the 3 inch x 96 inch dimensions work in a shop setting?
The 3 inch x 96 inch drawer side material format lets shops cut multiple same-height sides from one length, supporting efficient nesting and consistent drawer heights.
Why does a square edge profile matter on drawer side blanks?
The square edge profile provides straight, true reference edges, so cutting, aligning, and joining fronts and backs rely on accurate edges during drawer assembly.
How does the Endura ultra violet cured top coat affect workflow?
The Endura ultra violet cured top coat means the drawer blanks arrive pre-finished, so sides and interiors progress from cutting to assembly without separate finishing stages.
Select Genesis Drawer Side Material For Your Next Run
The Genesis drawer side material in maple, sized at 3 inches by 96 inches with 1/2 inch thickness, gives a defined starting point for drawer box construction. With a 1/4 inch drawer bottom dado and a 1/2 inch bottom reveal designed for undermount slides, the geometry is set up for consistent drawer bottoms and slide alignment. All wood blanks are pre-finished with Endura ultra violet cured top coat, so the interior faces are production-ready. Using these drawer side blanks lets shops align drawer dimensions, finish, and hardware interface around a single, consistent material.
