Drawer Side Material, 1/2" Groove, 1/2" Thick, 8" x 96", Maple
Description
Drawer Side Material 8 x 96 Maple For Builds
Drawer side material 8 x 96 maple from Genesis gives you a prefinished drawer side blank for building straight, consistent drawer boxes on repetitive cabinet jobs. The 8 foot blank length lets you cut multiple sides or fronts out of one piece, so longer production runs stay efficient and layout is easy on the bench. The maple construction aligns with common face-frame and frameless cabinet interiors that call for a light, clean wood look across the project. A 1/2 inch thickness provides a familiar drawer side profile, which keeps joinery setups predictable from job to job. The integrated 1/2 inch groove is designed as a bottom reveal for undermount slides, so the drawer interface aligns with standard undermount hardware geometry and helps streamline slide selection for this style of box.
Key Drawer Side Details That Support Builds
- Genesis drawer blank systems are available as veneer plywood, giving you a stable sheet-good style construction that machines consistently for dados, grooves, and end joinery on drawer runs.
- All wood blanks are prefinished with Endura ultra violet cured top coat, so the interior surfaces arrive sealed and ready to assemble, saving finishing steps on drawer boxes.
- All drawer blanks have a 1/4 inch drawer bottom dado, which provides a defined groove for standard drawer bottoms and keeps panel placement consistent across a bank of drawers.
- The 1/2 inch (13 mm) bottom reveal is designed for undermount slides, aligning the drawer bottom position with undermount hardware for proper engagement and smooth travel.
- Blank lengths are 8 foot, allowing multiple drawer components to be cut from a single length, which supports efficient cutting layouts and reduces offcut loss on production work.
Installation And Fit Details For Drawer Sides
The 1/2 inch groove built into this Genesis drawer side material sets the drawer bottom reveal for undermount slides, so once your saw fence and stops are set, each side you cut will share the same hardware-ready geometry. The 1/4 inch drawer bottom dado runs along the blank, letting you rip and crosscut to size while keeping the bottom groove centered where the system intends it, which helps drawers track evenly on matched slides. Because the blanks are 1/2 inch thick, joinery jigs, dovetail fixtures, or screw-and-dado methods that are already set up for this thickness can be used without changes. The Endura UV-cured prefinish is applied at the factory, so parts move directly from cutting and machining into assembly, which can tighten production timelines on cabinet and furniture jobs.
Using Genesis Drawer Side Blanks In Projects
Where These Maple Drawer Side Blanks Fit Best
Genesis drawer side blanks in maple suit drawer construction systems where a consistent, light-toned interior is expected across a full kitchen or casework run. The 8 inch height works for many base and tall cabinet drawer applications, so one blank size can serve multiple cabinet positions in the same project. The veneer plywood build supports use in drawer construction systems that depend on sheet-good type stability when running through saws and machining centers. With an 8 foot length, the SB203ME1/2 part number supports cutting left and right drawer sides, fronts, and backs in sequence, so shops can nest parts for multiple cabinets from one stick. The 1/4 inch bottom dado and 1/2 inch bottom reveal designed for undermount slides match modern hardware choices, making these blanks suited to contemporary kitchen and bath drawer layouts.
Why These Drawer Details Help Repeatable Results
The 1/2 inch (13 mm) bottom reveal designed for undermount slides means every drawer side cut from this blank will present the same relationship between the drawer bottom and the slide, improving consistency in how drawers seat and operate. The 1/4 inch drawer bottom dado keeps the bottom panel in a defined groove, which helps maintain square during glue-up and reduces the need for additional internal bracing. A 1/2 inch thick side gives you a predictable edge for machining joinery, so dovetails, finger joints, or confirmat-style joints can be run with repeatable cutter settings. The Endura ultra violet cured top coat provides a factory-applied finish on all wood surfaces of the blank, so sanding steps are reduced and interiors share a uniform appearance cabinet to cabinet. Using an 8 inch by 96 inch format in a maple species means layout, cutting, and assembly can all be planned around a standardized drawer component, supporting more organized workflow in busy shops.
Common Questions About Maple Drawer Side Material
What type of product is the Genesis SB203ME1/2 piece?
The Genesis SB203ME1/2 piece is a maple drawer side blank used within drawer construction systems, so it functions as the primary side material for building drawer boxes.
How does the 1/4 inch bottom dado help construction?
The 1/4 inch drawer bottom dado gives the bottom panel a dedicated groove, helping panels seat accurately and supporting square, uniform drawer assemblies during glue-up.
Why is the 1/2 inch bottom reveal important for undermount slides?
The 1/2 inch bottom reveal is designed for undermount slides, positioning the drawer bottom so standard undermount hardware engages as intended and operates smoothly.
What does the Endura UV-cured top coat do?
The Endura ultra violet cured top coat prefinishes the wood surfaces, providing a sealed, ready-to-assemble drawer interior that avoids separate finishing steps in the shop.
How does the 8 inch by 96 inch size support workflow?
The 8 inch by 96 inch size lets multiple drawer components be cut from one length, improving material yield and simplifying cutting patterns on larger cabinet runs.
What role does the 1/2 inch thickness play in use?
The 1/2 inch thickness provides a common drawer side dimension, so existing jigs and machine setups for that thickness can be used for repeatable machining and assembly.
Select Maple Drawer Side Blanks For Your System
The Genesis maple drawer side material, sized 8 inches by 96 inches with 1/2 inch thickness, 1/4 inch bottom dado, and 1/2 inch undermount slide reveal, aligns drawer construction with modern hardware and finish expectations. The veneer plywood structure and Endura UV-cured prefinish support straightforward cutting, machining, and assembly within drawer construction systems. For cabinet and woodworking projects that rely on standardized drawer boxes, choosing this SB203ME1/2 drawer side blank supports consistent dimensions and interior appearance across the run.
