Genesis 96" Drawer Side 7" Maple, SB178ME1/2

Genesis Drawer Side Material For Maple Boxes

Genesis drawer side material gives you maple drawer side blanks sized at 7 x 96 inches, so you can rip and cut parts for multiple drawers from one length and keep material consistent across a project. The blanks are 1/2 inch thick, which sets the side wall dimension for your drawer construction and helps standardize joinery choices from job to job. Each blank is produced as part of the Genesis high quality drawer blank systems, so the components are designed to work as a coordinated drawer construction solution. All wood blanks are made in veneer plywood, which provides a wood surface with plywood stability for drawer sides in typical woodworking environments. All drawer blanks are pre-finished with Endura ultra violet cured top coat, allowing you to bypass separate finishing steps and move directly from machining to assembly. This combination keeps your drawer workflow straightforward while maintaining a uniform maple look.

Maple Drawer Blanks Built For Fast Production

• The 7 x 96 inch drawer side blanks provide a long, uniform run of material, which helps you lay out multiple drawer sides efficiently and reduce layout time between cuts.
• The 1/2 inch thickness on these drawer side blanks sets a predictable side dimension, which simplifies tooling selection and repeat setups on saws, routers, and assembly fixtures.
• The veneer plywood construction delivers a wood-faced panel with a stable core, which supports straight drawer sides through normal shop handling and typical drawer service.
• The pre-finished Endura ultra violet cured top coat on all wood blanks eliminates separate clear finishing on the sides, which shortens the build sequence and limits downtime between machining and assembly.
• The Genesis drawer blank systems design means these components are intended to function as coordinated drawer construction parts, which supports consistent fit when building groups of drawers.

Drawer Side Groove And Bottom Layout Details

Each Genesis drawer side material blank has a 1/4 inch drawer bottom dado, so the groove for the bottom panel is already machined and you can run parts without cutting that channel separately. The blanks also have a 1/2 inch, or 13 mm, bottom reveal designed for undermount slides, which positions the drawer bottom in relation to the side to work with that slide style. This fixed reveal helps set the vertical relationship between the drawer side and bottom, which is important when aligning drawer boxes with undermount hardware specifications. The square edge profile on the blanks means the outside top and sides of the material are milled straight, so you start with a clean edge reference when ripping to final height or running joinery.

Using These Genesis Drawer Blanks On Projects

Where These Maple Drawer Side Blanks Fit Best

Genesis drawer side material in maple is part of a drawer blank system intended for drawer construction, so it fits jobs where you want a coordinated approach to building boxes from standardized parts. The 7 inch height of the blank provides room to produce drawer sides in that height range or to rip to narrower dimensions as needed, which supports both base and smaller drawer layouts using the same stock. Blank lengths are 8 feet, so you gain extended cutting runs that can be nested for kitchens, baths, or shop storage where you are repeating drawer sizes. The maple veneer plywood face gives the finished drawers a maple appearance, which aligns with maple cabinetry projects or interiors where a maple look is specified. Other heights and species are available within the Genesis system, which lets you stay within the same construction family when a different drawer side dimension or wood type is required.

Why These Construction Details Support Repeatable Results

The 1/4 inch drawer bottom dado in every Genesis drawer side blank fixes the groove location for the bottom, so once you set up for your bottom panel you can repeat drawer production without resetting groove tooling. The 1/2 inch, 13 mm, bottom reveal designed for undermount slides defines the offset between the bottom and the lower edge of the side, which helps keep drawer boxes aligned to the expectations of undermount hardware layouts. The 1/2 inch material thickness of the drawer side gives you a stable wall dimension that works with common undermount slide design ranges and supports consistent joinery depth for rabbets or other corner connections. The square edge profile on the blanks provides a reliable reference face along the full 8 foot length, which helps keep rips straight and joints aligned during machining. Having all drawer blanks pre-finished with Endura ultra violet cured top coat lets you sand and machine as needed and then move directly to assembly within the Genesis drawer blank systems workflow.

Common Questions About Genesis Drawer Side Material

Choose Genesis Drawer Side Blanks For Maple Projects

Genesis drawer side material in 7 x 96 inch maple gives you a 1/2 inch thick veneer plywood blank with a 1/4 inch bottom dado and a 1/2 inch bottom reveal designed for undermount slides. All drawer blanks are pre-finished with Endura ultra violet cured top coat, so drawer sides can move directly from cutting and joinery into box assembly. With blank lengths at 8 feet and a square edge profile, this Genesis drawer blank systems component supports efficient layout, straight cuts, and a unified maple appearance across your drawer runs.