Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock free swinging inset non-mortise hinge is a semi-concealed face-frame hinge that supports inset cabinet doors where the door sits within the frame. This hinge is designed as a non-mortise solution, so the door frame does not need to be cut or recessed, which keeps the carpentry focused on layout and alignment instead of cutting pockets. The hinge uses a ball tip design and functions as a free swinging hinge, so the door moves smoothly through its swing arc without spring resistance. As a semi-concealed hinge, part of the hinge sits inside the cabinet while a portion remains visible, which suits projects where traditional hinge styling and straightforward access to adjustment points are preferred.
This hinge is identified as a non-mortise hinge, so it mounts on the cabinet and door surfaces without cutting recesses into the wood, which keeps installation focused on accurate screw placement. The hinge is a semi-concealed face-frame style, so it mounts to a face-frame cabinet in a way that leaves part of the hinge visible, providing direct access to the points used for horizontal and vertical adjustment. The angled set hold feature simplifies initial installation by helping position the door while screws are driven, which is helpful when aligning inset doors where frame reveals are tight. Because the design is inset and the wings are inter levered to minimize the door gap, careful positioning at the frame edge directly influences the resulting 1/16 inch reveal.
This hinge is described as a semi-concealed face-frame hinge, so it is suited to cabinet constructions that use a face frame with doors sitting inside the frame opening. The inset configuration means the door edge aligns closely with the frame interior, so the hinge geometry is tailored to hold the door within the frame rather than overlaying it. Because the hinge is free swinging, it allows the door to open and close under the users control without spring force returning the door, which is useful for cabinets where the user determines the resting position. The non-mortise design allows the hinge leaves to sit on the surface of the frame and door, so the installation work centers on screw layout instead of chisel or router work on the frame. As part of Amerock Corporation semi-concealed hinges line, it fits projects that call for semi-visible hardware on traditional or utility cabinetry where access to the hinge is a benefit.
The exclusive pin treatment is noted as assuring silent and reliable performance, so the hinge pin is engineered to manage friction and movement, which supports doors that open without noise at the pivot point. The angled set hold feature simplifies installation and allows easy horizontal and vertical adjustments, so once the hinge is mounted, the door position can be tuned at the hinge to refine gaps and alignment across multiple doors. Inter levered wings are designed to minimize the door gap to as small as 1/16 inch, so the mating leaves work together to define a consistent tight reveal, which is critical on inset installations where irregular gaps are immediately visible. Because the hinge is non-mortise, the wood around the mounting area remains intact, so fasteners work into full material thickness, which supports maintaining holding power over the life of the cabinet door. The flat black finish identified in the description provides a dark, uniform appearance at the visible hinge portions, which influences the visual contrast between hardware and cabinet surfaces.
The Amerock free swinging inset non-mortise hinge supports inset cabinet doors that sit within a face-frame opening, so the hinge geometry aligns the door inside the frame rather than overlaying the front.
The hinge non-mortise design means no recesses are cut into the door or frame, so installation focuses on accurate hinge positioning and screw placement on the surface of the cabinet components.
The hinge exclusive pin treatment is stated to assure silent and reliable performance, so the movement at the pin is controlled to reduce operating noise and support consistent door swing over time.
The angled set hold simplifies mounting and supports easy horizontal and vertical adjustments, so doors can be shifted at the hinge to fine-tune inset reveals on face-frame cabinets.
The inter levered wings are designed to minimize the door gap to as small as 1/16 inch, so they help create tight, consistent reveals between the inset door and the surrounding frame.
The hinge flat black identification describes a dark surface color on visible portions, so the hardware presents a uniform black appearance against the cabinet when the door is closed.
The Amerock free swinging inset non-mortise hinge PK3175TBFB brings an inset, semi-concealed face-frame hinge design together with an exclusive pin treatment and inter levered wings that minimize door gap to 1/16 inch, so it supports tight reveals and quiet movement. The angled set hold feature simplifies installation and allows horizontal and vertical adjustments at the hinge, so door position can be refined without reworking the cabinet. With its flat black identification on visible portions, this hinge suits projects calling for dark hardware on face-frame cabinets. For inset applications that benefit from non-mortise mounting and direct access to an adjustable semi-concealed hinge, this model provides a focused solution built around those specific needs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each |  AMCM9765F-PT Mfr# CM9765FPT | 9765 Magnetic Catch for Full Inset, Tan |