Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock free swinging inset non-mortise hinge brings a semi-concealed solution for face-frame cabinets where an inset door is required, so installers can hang doors without cutting mortises in the frame. This hinge is described as free swinging, meaning the door moves without built-in self-closing resistance, which suits layouts where another component manages closing or where a free-moving door is preferred. The ball tip hinge design provides a defined pivot point, helping the leaf track predictably during repeated use. As a semi-concealed hinge in satin nickel, it leaves only selected elements visible when the door is closed, which supports clean cabinet lines while maintaining access to fasteners for service or adjustment. The hinge belongs to Amerock Corporation's semi-concealed hinge offering, aligning with face-frame cabinet construction that relies on frame mounting for door support.
This Amerock semi-concealed hinge uses a non-mortise configuration, so the hinge mounts directly to the face frame and door without recessing, which streamlines cabinet preparation. The screw-on style provides attachment through standard screw holes, supporting straightforward installation using standard drivers. The angled set hold feature supports horizontal and vertical adjustments after the hinge is fixed, which helps align inset doors to the frame for an even reveal. Because the wings are designed to reduce the door gap down to about 1/16 inch, the hinge supports tight spacing that many cabinet installations require. As a free swinging inset hinge, it is suited to applications where the door needs to swing freely once unlatched while still holding an accurate position at rest.
This Amerock free swinging inset non-mortise ball tip hinge belongs to the semi-concealed face-frame hinge category, placing it in cabinet work that uses a face frame and inset doors. Because it is non-mortise, it is suited to situations where cutting a recess in the frame or door is impractical or undesirable, such as retrofit projects on existing cabinetry. The hinge mounts on the surface of the face frame and the inset door, so it serves well on many kitchen, bath, or built-in cabinet layouts that use a visible frame. Its inter levered wings are engineered to minimize the reveal to roughly 1/16 inch, which supports installations that call for a tight, controlled gap between the door edge and frame. As a semi-concealed hinge, it leaves part of the hardware visible when the door is closed, fitting applications where a satin nickel hinge detail is acceptable or desired alongside matching decorative hardware.
The exclusive pin treatment that assures silent and reliable performance helps reduce noise at the pivot, which is valuable on doors that see frequent use where squeaks would be noticeable. The angled set hold that simplifies installation and offers horizontal and vertical adjustments gives installers a way to correct minor drilling or layout offsets through hinge adjustment rather than reworking the cabinet. That adjustability supports consistent reveals between door and frame when working across multiple openings. The non-mortise design that eliminates frame mortising removes a cutting step, which can shorten installation time and reduce the chance of weakening narrow frame members. With inter levered wings controlling the door gap to as small as 1/16 inch, the hinge helps maintain a neat alignment line across a run of inset doors. The satin nickel finish provides a defined look at the exposed portions of the semi-concealed hinge, supporting projects that coordinate finishes across knobs, pulls, and hinges.
The hinge is classified as a semi-concealed face-frame hinge and is intended for inset cabinet doors on face-frame cabinetry where part of the hinge remains visible.
The non-mortise design eliminates mortising the door frame, so the hinge mounts on surface faces, which can reduce layout and cutting time during cabinet installation or replacement tasks.
The exclusive pin treatment assures silent and reliable performance, so the hinge pivot is designed to operate quietly and consistently as doors are opened and closed.
The angled set hold simplifies installation and allows horizontal and vertical adjustments, helping installers align inset doors accurately without relocating mounting holes.
The hinge has inter levered wings designed to minimize the door gap to as small as 1/16 inch, supporting tight and consistent reveals on inset cabinet doors.
The hinge is a satin nickel ball tip hinge in a semi-concealed style, so only selected satin nickel elements remain visible on the face-frame cabinet when the door is closed.
The Amerock free swinging inset non-mortise ball tip hinge in satin nickel combines semi-concealed styling with a surface-mount, non-mortise layout that suits face-frame inset cabinet work. Its exclusive pin treatment, angled set hold adjustments, and inter levered wings supporting a door gap down to about 1/16 inch all translate into smoother operation, cleaner reveals, and fewer layout corrections. For projects where a satin nickel semi-concealed hinge is appropriate visually and a non-mortise approach fits the workflow, this Amerock PK3175TBG10 hinge offers a focused solution for hanging and aligning inset doors.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each |  AMCM9765F-PT Mfr# CM9765FPT | 9765 Magnetic Catch for Full Inset, Tan |