Amerock free swinging inset hinge is a semi-concealed, non-mortise hinge designed for face-frame cabinets using inset doors, so it supports clean cabinet lines without full exposure on the frame. This hinge uses a free swinging action, which lets the door move through its range without a built-in self-closing mechanism, giving flexibility for projects that rely on other closure methods. The inset design matches applications where the door sits flush within the cabinet frame opening, helping maintain a flush front on built cabinetry. Being a semi-concealed hinge, it leaves only selected parts visible, which can simplify layout while still keeping hardware presence low. The non-mortise construction means it works without cutting hinge pockets, which can streamline door prep on jobs focused on repeatable layout. The hinge is identified as fitting a 3/4 inch door, tying it directly to common cabinet door thickness in many face-frame installations.
This Amerock Corporation hinge is built as a non-mortise component, so its leaves sit on the surface of the door and frame rather than in cut pockets, which simplifies layout in face-frame shops. With an inset, 3/4 inch door rating, the hinge corresponds to doors sized to sit within the frame opening, allowing layout that maintains frame reveals. Being a semi-concealed hinge within the semi-concealed face-frame hinge category, it places working parts close to the frame edge while limiting what shows on the cabinet front, which can help align visual lines with other semi-concealed pieces. The ball tip ends identify hinge pin locations, which can aid in consistent vertical positioning along multiple doors in a bank.
This Amerock free swinging inset hinge sits in the semi-concealed face-frame hinge family, so it is intended for cabinet builds where doors are inset into the frame. Because it is designed for a 3/4 inch door, it matches many standard face-frame cabinet doors, allowing consistent thickness across a run. Its non-mortise classification means the hinge mounts without recessing into the wood, which is useful on finished frames where cutting deep pockets is not desired. The inset function coordinates with framed cabinet designs where the door edges sit within the opening, giving a framed, flush-front appearance when the door is closed. As a semi-concealed hinge, only limited portions remain visible, supporting projects that target a modest hardware profile on the cabinet face.
Every Amerock functional hardware series item, including this hinge, is tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality. This testing focus means the hinge is exercised beyond typical kitchen cabinet usage, supporting long-term door movement where repeated opening and closing are expected. Meeting and exceeding requirements for cycle life relates directly to the hinge pivot and knuckle design, so the free swinging action is validated under extended use. Strength-focused testing addresses how the hinge supports the 3/4 inch door on a face-frame, which matters where doors are used frequently or carry typical cabinet contents. Finish quality testing tied to the champagne bronze surface helps maintain appearance over the hinge service life, supporting visual consistency with other Amerock functional hardware on the same installation.
The Amerock free swinging inset hinge is designated for a 3/4 inch inset door on a face-frame cabinet, so it matches doors that sit flush within the frame opening.
The Amerock non-mortise ball tip hinge mounts without cutting hinge pockets, which simplifies door and frame preparation on both new cabinet work and retrofit projects.
This Amerock hinge is specified as free swinging, so it moves without an integrated self-closing feature and pairs with separate closure methods as needed.
The hinge is a semi-concealed hinge, so only selected portions are visible, helping keep the front of face-frame cabinets visually clean while preserving hinge access.
The champagne bronze finish provides a warm metallic tone that aligns visually with other champagne bronze hardware, helping maintain a coordinated look across the cabinetry.
This Amerock functional hardware hinge is tested in conditions exceeding KCMA requirements and BHMS standards for cycle life, strength, and finish quality, supporting long-term cabinet service.
The Amerock free swinging inset hinge in champagne bronze brings an inset, semi-concealed, non-mortise option to face-frame cabinet work using 3/4 inch doors, so it fits many standard door builds. Its ball tip style and champagne bronze finish coordinate with decorative hardware across the installation. Testing that exceeds KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality supports long-term hinge performance on frequently used doors. For cabinet projects where an inset, non-mortise, semi-concealed hinge in a warm metallic finish is specified, this Amerock PK3175TBCZ hinge aligns well with that requirement.