22 Inch Over-Travel Self-Close Drawer Slide Built for Zinc-Standard Cabinet Work

The Knape and Vogt 8419 series is a 22 inch side-mount ball bearing drawer slide with 1 inch of over-travel and an integrated self-close spring, rated 100 lb per pair and finished in zinc. It is designed for drawers that sit under countertop overhangs or behind deep face frames, where standard full extension falls just short of full reach.

Key Features

• 1 inch over-travel carries the drawer past the cabinet face, clearing counter overhangs so the back of the drawer is reachable.
• Self-close spring pulls the drawer fully shut once pushed within the capture zone, no handle needed to finish the close.
• 100 lb weight rating per pair covers a fully loaded kitchen, pantry, or utility drawer.
• Steel ball bearings in full-length raceways deliver smooth, consistent travel from the first pull to the ten-thousandth.
• Non-handed design means both slides in the pair are identical, with no left-right sorting on the bench.
• Zinc finish provides standard indoor corrosion resistance and blends with painted and natural cabinet interiors.

Where the Over-Travel Earns Its Keep

Most drawers under a kitchen counter or behind a thick face frame lose an inch or two of practical reach at full open because the cabinet box stops before the contents do. The 8419's 1 inch of over-travel pushes the drawer past full extension, putting rear contents at the front edge rather than behind it. This is the slide to choose when a standard full-extension model leaves a gap between where the drawer stops and where the countertop overhang ends. It is equally useful in pantry pull-outs and utility drawers where deep loading means the last few items in the back are always the hardest to reach.

Zinc Finish in the Context of a Working Drawer

Zinc plating is the workhorse finish of this product category: corrosion-resistant for dry indoor environments, functional rather than decorative, and unobtrusive beside the open drawer. On a side-mount slide, the finish is mostly visible only when the drawer is out — the slide sits along the interior sidewall the rest of the time. Zinc suits painted interiors, melamine, and raw wood cabinets equally well. It is not a stainless finish and is not rated for wet or exterior applications; for indoor cabinetry it is the reliable default. The bulk-pack format means slides arrive ready to pull from stock on a production run without retail packaging overhead.

Who Should Specify the 8419 Series

Cabinet shops building kitchen drawers under standard counter overhangs will find this slide solves the reach problem without stepping up to a specialty heavy-duty product. Contractors retrofitting existing cabinetry where the countertop overhang limits full-drawer access get the same benefit in a replacement context. The self-close feature is a practical addition in residential kitchens where soft-close is not specified but the drawer still needs to close on its own rather than stay where it is left. At 100 lb per pair, the 8419 is sized for standard kitchen and utility duty; it is not the right choice for loaded file drawers or heavy shop drawers above that class. In face-frame cabinets, rear mounting brackets are required to support the back of the slide and are sold separately from this series.

The Right Slide for the Overhang Problem

When standard full extension leaves the back of the drawer just out of reach, the 8419 series closes that gap with 1 inch of over-travel and a self-close spring that finishes the job on the return — reliable performance in a zinc finish built for everyday indoor cabinet work.