KV8419 24" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8419B 24

Knape And Vogt 24 Inch Drawer Slides For Smooth Self Closing

Knape and Vogt 24 inch drawer slides provide a self closing side mount solution for drawers that need consistent return action. These 8419 Series ball bearing slides use a side mount design, so they support drawers from each cabinet side for straightforward layout in typical casework. The slides are unhanded, which means the same member works on either side of the drawer, simplifying stock and installation on both left and right drawers. A ball bearing construction supports smooth movement along the track, helping drawers travel without sticking through daily use. The slides are part of the Knape and Vogt 8419 Series, tying them to a defined family of over travel self close slides for projects that repeat this specification. With a 24 inch length, they match drawers built around that slide length, supporting planning for cabinet depth and drawer box sizing in shop drawings.

Key Drawer Slide Details For Real-World Projects

• The 8419 Series design provides 1 inch overtravel, so the drawer extends beyond its nominal length, improving access to contents near the back of the drawer in deeper cabinet runs.
• Self closing action brings the drawer back toward the cabinet as it nears the closed position, helping drawers return consistently without needing separate closing devices or additional hardware in the opening.
• These are side mount slides, so they fasten to the cabinet sides and drawer sides, matching standard construction where drawer boxes ride along each case side rather than beneath the drawer.
• The unhanded configuration allows either slide member to be used on left or right, simplifying ordering and reducing the need to separate parts during installation on multiple cabinet banks.
• Ball bearing construction supports the moving members of the slide, giving drawers a guided, rolling travel that helps reduce friction compared to non-bearing slide types during repeated opening and closing.
• The specified Anochromek finish provides a defined finished surface on the slide members, so the hardware presents a uniform appearance when viewed along drawer sides inside cabinets.

Installation Dimensions And Mounting Considerations

The 24 inch length ties the slide to drawer boxes built for that stroke, so cabinet depth and drawer length can be matched directly to this dimension when laying out casework. Side clearance is specified as 1/2 inch plus 1/32 inch minus 0 inch on each side, giving a defined running clearance between the drawer side and cabinet side for these ball bearing slides. That clearance figure guides drawer box width when fitting into an opening, so side gaps match the slide requirement rather than guesswork. The slide height is 1-13/16 inch, so the drawer side height and notching can be planned around that profile when coordinating with drawer bottoms or side details. A 32 mm pattern is listed, indicating mounting holes aligned to that system, which supports drilling patterns in shops that work with 32 mm cabinet construction.

Using 8419B 24 Slides In Cabinet And Drawer Work

Where These 24 Inch Slides Are Typically Applied

The Knape and Vogt 8419B 24 designation identifies these as 24 inch long slides within the 8419 Series, making them suitable for drawers built around that slide length in cabinets, furniture, or casework. Their side mount layout pairs with drawer boxes that have side-mounted hardware rather than underneath, fitting common frameless and face-frame cabinet designs that rely on side clearance. Because the slides are unhanded, they work on both the left and right sides of the same drawer, so installers can use a single slide part on runs of multiple cabinets without separating left and right stock. The 1/2 inch plus 1/32 inch minus 0 inch side clearance requirement on each side gives shops a definite target when sizing drawer boxes, supporting repeatable fits across many openings where the same clearance is needed.

Details That Support Smooth Operation And Repeatability

The 1 inch overtravel feature means the drawer extends slightly past its nominal length, which helps users reach items stored toward the rear of the drawer without obstructed access at the countertop or cabinet face. Self closing action engages as the drawer nears the cabinet, so drawers travel back toward closed without separate closing components, supporting consistent closure behavior in everyday use. Ball bearing construction guides the moving members along bearings, which supports smooth sliding under load compared with plain slides. Lever disconnect is listed, giving a means to separate the drawer member from the cabinet member, which helps when installing or removing drawer boxes during fitting or service. A ball retainer latch is specified, securing the ball bearings in position within the slide assembly, which supports stable travel along the track. Polymer stop cushions are noted, providing cushioned contact points when the slide reaches its travel limits, which can moderate impact at the ends of movement. The recommended fasteners are #7 x 1/2 inch Phillips Pan Head (WW44190), tying the mounting to a specific screw size and head style for attachment through the slide holes into cabinet and drawer material.

Common Questions About KV 8419 24 Inch Slides

Selecting These 8419B 24 Slides For Your Next Run

Choosing the Knape and Vogt 24 inch drawer slides with self closing and 1 inch overtravel ties your project to a defined 8419 Series part number with clear dimensions. The specified side clearance, slide height, and 32 mm pattern support consistent layout from one cabinet run to the next. Using an unhanded, side mount, ball bearing slide gives installers a single 24 inch slide style to apply across multiple drawer banks. For cabinet, furniture, or casework work that matches these dimensions, these 8419B 24 slides provide a documented, repeatable choice.