Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 14 inch drawer member from Knape and Vogt's 8400 series, a full-extension side-mount ball bearing slide component rated 100 lb per pair. Sold in bulk pack, it is the drawer-side half of the KV 8400 slide system, designed for shops and contractors building or restocking multiple drawers at once.
The 8400 series drawer member's hold-in anti-rebound detent is a mechanical catch, not a spring and not a damper. Once the drawer is pushed shut, it stays there. It will not drift open on a sloped floor, and it will not bounce back after a firm close. That behavior matters in office cabinets, shop storage, and anywhere a loaded drawer needs to stay put without locking. This is a standard-motion slide beyond the detent: no soft-close, no spring pull — the drawer travels freely on ball bearings and stops where it is left or where the detent holds it.
The drawer member is cold-formed steel with a zinc electroplated finish. Zinc is the segment's functional standard — it protects the steel through years of indoor cycling without adding bulk or visible hardware to the open drawer. The finish is not decorative and is not rated for wet or exterior environments; this slide is for dry indoor cabinetry. The bulk-pack format delivers the parts loose in a carton, which is how production shops receive and bin them.
The 8400-92 drawer member is the inner component of the KV 8400 side-mount system. It pairs with the matching 8400 cabinet member to complete a working slide. Cabinet shops running the 8400 series in volume buy the drawer member and cabinet member in separate production packs to match consumption rates — a shop that replaces drawers more often than cabinets stocks more drawer members. At 14 inches, this member suits a 14 inch slide installation: confirm the cabinet interior depth and drawer box depth before ordering. With 1/2 inch of side clearance required per side, build the drawer box 1 inch narrower than the cabinet opening.
This is the drawer member only — the inner rail that attaches to the drawer box. It requires the matching KV 8400 cabinet member to form a complete, working slide pair.
A mechanical detent catches the drawer when it is pushed closed and holds it there. The drawer will not drift open or bounce back after a firm push. It is not soft-close and it is not a spring-close — it simply stays put until pulled open.
No. The 8400 drawer member is non-handed — the same part installs on either side of the drawer box, so you order by quantity, not by side.
Yes, but face-frame installations need rear support at the back of the slide. Add the appropriate KV rear mounting brackets, sold separately, to support the cabinet member's back end inside the face-frame cabinet.
Bulk-pack means the drawer members ship loose in a carton rather than in retail polybags. It is the production format for shops that bin parts for use across multiple jobs.
One non-handed part, one finish, one reliable detent — the KV 8400 drawer member in zinc is the production-grade choice for shops that need consistent, in-stock components without sorting or special-order delays.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each |  KV8400Q90-14 Mfr# 8400-90 14 | KV8400 14" Full Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Cabinet Member Unhanded Side Mount Zinc Bulk-Pack - 8400-90 14 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KV8402 Mfr# 8402 | Rear Mounting Bracket for 8400 Series Slides, Zinc |
